|
Title: Building a 2007cc motor to sell Post by: Paul da Graca on June 28, 2013, 22:27:21 pm I am in the process of building a 2007cc motor to sale. The reason for selling it, to give funds to my friend family. This will be a really nice motor with a lot of great kit inside it. He been saving these items for a few year, but rather have the money. so I am helping him and "you" to have a nice motor for 2013
The Crank Cased is a Recondition AS41. All the machine work was done by Ahenendorp in Germany Alignbore: +50/22mm Shuffle pin on main journal Resurfaces carter Full flow 18mm x 1.5mm Open for 90.5 Pistons Main Bearing Silverline Camshaft bearing Silver line double thrust New Mahle 90.5B piston (Stroker) 90.5 Teflon buttons The other goodies are Scat 78.4mm Counterweight Crankshaft German 200mm lighten Flywheel Aluminum front degree crank shaft pulley Performance 200mm Pressure Plate New CB Performance Stroker Connecting Rods with Mahle Bearing Engle 120 camshaft New Straight Cut Gears (Steel on Steel) Engle Lifters 043 Cylinder Heads Cut for 90.5, Long reach spark plugs, Ported and Polished, Unleaded New 40mm RVS intake valves Manley’s New 35.5 mm RVS exhaust valve Manley’s Engle dual springs Chromoly retainers Harden Keepers New 1.25 Rocker Arms with solid shafts Chromoly push rods IAP dual O-ring spring load aluminum pushrods tubes Set of Empi Valves Covers Crank shaft, flywheel, and pressure plate are balanced. Connection rods, piston are all weighed out, and assembly using Kendall motor oil with special additive for breaking in new motors. There is two ways I can build the motor. I can build this as a Long block motor and you finish it off yourself. Or if you want a turnkey motor I can talk to you on what you want on this motor. Of course there is a more price to the long block price below. The price for the long block is 3900.00 euros, I am based in the Netherlands so if you want to have the motor shipped to you, that cost is to you.[attachment=1] Summer is around the corner, so let this 2007cc motor be your motor for 2013. Give me a call at + 31 6 40 50 30 93. thanks for looking at my advert Title: Re: Building a 2007cc motor to sell Post by: Paul da Graca on June 28, 2013, 22:28:59 pm more photos
Title: Re: Building a 2007cc motor to sell Post by: dirk zeyen on July 02, 2013, 09:37:53 am Nice engine ;D but don't use a engle W120 /1.25 ratio rockers with single high rev springs.......
Title: Re: Building a 2007cc motor to sell Post by: Paul da Graca on July 02, 2013, 18:46:56 pm I do have Dual spring too. :) also Engle
|