|
Title: Fiberglass 68- front fenders, Lasercut parts of the shelve, Brake parts etc. Post by: -Alex- on September 18, 2013, 21:26:03 pm I have some stuff to sale, feel free to ask by private message or email: alexstorskrubb@jippii.fi
Dont ask on this topic, because i dont watch it every day. If the price is too high, you can give me a nice offer ;D Lasercut parts available right away: -2 x 12-1 134x6mm Trigger wheel with sensorbracket for honeywell 1gt101dc sensor -2 x VW sign 210x4mm - 21€ each or 35€ both -2 x VW sign 68x4mm - 12€ each or 20€ both -1 x transaxle midmount kit with flange and two bended ears - 40€ -1 x 200mm flywheel puller with M16 nut at center - 35€ ----------------------------------------------------------------------------------------------------------------------------------------- Porsche PCD hats for wilwood rotors -Two for front which have 12x7" pcd for 1/4 UNF bolts. 10.9 bolts come with these. -Two for rear which have 8x7,62" pcd for 5/16 UNF bolts. 10.9 bolts come with these. Made from 6082-T6 aluminum and anodized to black. There is a lot of rotors available for these rotors: http://www.wilwood.com/Rotors/RotorList1.aspx 70€ each or offer --------------------------------------------------------------------------------------------------------------------------------------- Kerscher fiberglass front fenders for beetle 68-, 3cm inner widened, NEW. Made in Germany, all holes drilled, steel headlight bucker, best QUALITY ever! At the picture is outer widened. New at kerscher 399€ 275€ or best offer ------------------------------------------------------------------------------------------------------------------------------------------- Boxster brake caliper adapters from Kerscher 4-piston Porsche brake kit (http://www.kerscher-tuning.de/images/dynpic.php?file=L2thZWZlci9ncmFmaWtlbi9icmVtc2Uvdndfa2FlZmVyXzRrb2xiZW5fcG9yX2Jha2VyX3ZhXzEwMF80X2d1Z181MDAuanBn&width=500). http://www.kerscher-tuning.de/kaefer/index.php?gruppe1=Bremsanlagen&gruppe2=Bremsanlagen+VA Fits with 300-320x20-24mm rotors. Originally used with 278x20mm rotor at the kit and also brake caliper M10 holes at spindle were moved inwards 22mm by Kerschers installation manual. (http://www.kerscher-tuning.de/kaefer/pdf/BREMSEVA_4kolben.pdf) 60e ---------------------------------------------------------------------------------------------------------------------------------- Aluminum t IDF/DRLA velocity stacks 4 x stacks, with up to 46mm carbs. 30e --------------------------------------------------------------------------------------------- (http://img856.imageshack.us/img856/1961/01062013.jpg) (http://img822.imageshack.us/img822/9647/hihnapyrosineen.jpg) (http://imageshack.us/a/img194/5566/vwmerkit.jpg) (http://img24.imageshack.us/img24/9199/brgkeskituki.jpg) (http://images.thesamba.com/vw/classifieds/pix/4459101.jpg) (http://img844.imageshack.us/img844/7773/etujarrut.jpg) (http://img822.imageshack.us/img822/7831/takajarrut.jpg) (http://img405.imageshack.us/img405/9523/100820123.jpg) (http://www.kerscher-tuning.de/images/dynpic.php?file=L2thZWZlci9ncmFmaWtlbi9rYXJvc3NlL2tvdGZsdWVnZWxfbWV4X3ZsXzRhX2dyb3NzLmpwZw==&width=500) (http://img833.imageshack.us/img833/4264/boxstersatulanadapterip.jpg) Title: Re: Fiberglass 68- front fenders, Lasercut parts of the shelve, Brake parts etc. Post by: -Alex- on September 24, 2013, 08:39:41 am up
Title: Re: Fiberglass 68- front fenders, Lasercut parts of the shelve, Brake parts etc. Post by: -Alex- on October 01, 2013, 08:52:27 am up
|