|
Title: Window and door lock regulator clean and Lube...??? Post by: Kaferdog on December 09, 2013, 09:57:48 am Can Anyone what works best to clean the sticky grease inside a window regulator & door lock mechanisms and what to re-grease it with ..???
Title: Re: Window and door lock regulator clean and Lube...??? Post by: Donny B. on December 09, 2013, 17:30:40 pm I used aerosol carb cleaner along with high pressure air to clean it. If it's real thick grease I use a tooth brush as well. Then used light penetrating oil (I use kroil) and dry moly powder to lube. then I mounted it my vise and used my reversible electric drill to run it up and down. Don't go to fast as you can damage it.
Title: Re: Window and door lock regulator clean and Lube...??? Post by: Martin S. on December 11, 2013, 05:14:58 am Recently I dealt with a sticky drivers window regulator in our 65. I thought it was the regulator and had a replacement ready to go, but most of the problem was the felt channels below the sash that weren't tight into the metal channels. There also was some tar-like ooze coming from somewhere that was gripping the glass in the channels. I managed to clean out the channels with the glass dropped down, without replacing the felts and it worked smooth enough again. The alignment of the glass is critical too.
Title: Re: Window and door lock regulator clean and Lube...??? Post by: Kaferdog on December 15, 2013, 10:58:42 am Thanks Guys..!...Will give both a try.!
|