|
Title: Results raptor cam JPM00406 Post by: exportbug on July 14, 2014, 07:15:54 am Hello guys,
does anyone drive the raptor camshaft JPM00406 and can tell me some results?? I have a broken cam and now I´m looking for a new camshaft to test..... Engine is an 2700ccm (86x100) with 48mm intake and 39mm exhaust....... Many thanks Thorsten Title: Re: Results raptor cam JPM00406 Post by: kb on July 14, 2014, 08:10:47 am I run the 00407 (same, but 107 lobe center instead of 106).
I'm really happy. Used it to replace my old pitted FK89. No dyno-numbers or anything unfortunaly, but the engine is very responsive and pulls great. (2332cc, 44mm intake, 37.5mm exhaust, 13:1 compression, E85..) Title: Re: Results raptor cam JPM00406 Post by: neil68 on July 16, 2014, 19:31:40 pm You should also email Johannes for his input. I was ready to purchase the 00406, but after exchanging a few emails, he recommended 108 lobes and a shorter duration with 10.8 mm lift...probably because I have a full-weight street-strip Beetle with 48 x 37.5 valves.
Title: Re: Results raptor cam JPM00406 Post by: exportbug on July 17, 2014, 06:42:27 am Hi guys,
thanks for the replies......only two but better than nothing ;) I emailed Johannes but no answer yet, maybe he has holidays.... @neil68: what camshaft he has recommended you? Do you have a number? A friend of me have an JPM00208 and I can get it, to test.....!? An other engine builder recommended me an engle FK-91.....!? Thanks Thorsten Title: Re: Results raptor cam JPM00406 Post by: neil68 on July 17, 2014, 07:23:19 am Hi guys, thanks for the replies......only two but better than nothing ;) I emailed Johannes but no answer yet, maybe he has holidays.... @neil68: what camshaft he has recommended you? Do you have a number? Thanks Thorsten 06908 |