|
Title: Engine parts Post by: SuperTrigger on September 01, 2014, 08:49:10 am 1)SuperFlow heads,
For 94mm bore 44x37,5 RST Valves K800 spring Titan retainers compustion chamber 48cc Berg valvecover converter set, you can use stock valvecovers intakemanifolds DRLA spacing I have Flow numbers also Dynoed from 2332cc engine CR 11.0 + FK46 cam + 1,5:1 rockers + MS1 V2.2 fuelinjection, 234hv / 288NM from flywheel. 3) Used FK46 cam + lifters (Scat) 4) Throttlebody pair DHLA spacing 48mm 120€ - No throttle plates and axels 5) Throttlebody pair IDA spacing 50mm - about 40 mm high - self made, needs some kind of throttle stop and Idle control 6) Airfilters 50€ Like these -->http://hotcars.net/p.../big/5943-1.jpg 9)Transmission - Stock case - Aluminium sidecover - 1-2 gears stock, - 3 gear 1,51 - 4 gear 1,25 - Finalgear 4,125 - Diiff 10) Petronix Billet jakaja used only for one dyno session and 4 starts at strip. http://aircooled.fi/...illet-pertronix Parts are in Finland and sending cost's will be added. Will take pictures if requested. Contact with PM or mail markopuikkonen (@) yahoo.com Title: Re: Engine parts Post by: SuperTrigger on September 30, 2014, 10:09:03 am No need for parts?
Possible to Trade for 4" case. |