|
Title: Complete turnkey 2007cc Turbo EFI Street Engine Post by: Elt on October 28, 2014, 16:15:56 pm As my racecar is finally finished, I have decided to sell the engine from my roadcar.
All engine work by Daz Chandler at Aircooled Performance. EFI and wiring loom done by me. This engine took my full weight, 1959 Ghia convertible with Freeway Flyer gearbox to a best time of 12.98 @ 105mph. ;D ;D Easy 11's with the right car/gearbox/driver combination. Specs: Rimco AS41 case bored and tapped for full flow CB 78mm 8 dowel crank CB H beam rods Mahle steel backed bearings 90.5 Mahle barrels and pistons Total Seal rings CB 044 CNC roundport heads AJ Simms LBC2 camshaft Scat 1.25 rockers Manton pushrods Scat Chromo 12lb flywheel Scat 1.5 quart deep sump Kennedy stage 1 clutch cover Daiken HD drive plate 45mm Jenvey throttle bodies CSP match ported inlet manifolds CSP throttle linkage CB pressure pots Stainless CB style VW Speedshop turbo exhaust, modified to allow turbo to behind the rear valance/wing of the Ghia. No body/valance trimming required to fit into a 30hp engine bay. Low Bugget T3 turbo CB wastegate BOV Emerald K6 ECU and wiring loom Innovate LC1 Lambda probe All tinware powdercoated in satin black Bosche alternator Balance pulley modified for crank trigger. Custom ally trigger mount. Ford coilpack (distributorless) Welded Bugpack fan, etc Engine is still in the car so a test drive may be possible depending on weather and access to storage facility. Ideal engine for a lowlight Ghia as all the hard work has been done to make it fit. Strip and check can also be included in the price. Looking for £5000 ono Mark +44 7968 312177 Title: Re: Complete turnkey 2007cc Turbo EFI Street Engine Post by: Elt on October 30, 2014, 10:52:08 am Here's a pic of it in the car..
|