|
Title: valve seats t4 1,7 l engine! Post by: tezer on January 21, 2015, 22:00:54 pm Annyone know where you can bay valve seats to a 1.7 motor
whit inlet valve that is 39.3 mm? or can i use 40mm valve seat? Title: Re: valve seats t4 1,7 l engine! Post by: SlingShot on January 22, 2015, 05:32:12 am I believe CB Performance carries some decent seats. You will have to check on their site for specific dimensions .
Title: Re: valve seats t4 1,7 l engine! Post by: Udo on January 22, 2015, 17:05:35 pm You can not change them without the right tools . You must cut the head to oversize or bigger valves. CSP has seats if you want to buy some
Udo Title: Re: valve seats t4 1,7 l engine! Post by: tezer on January 22, 2015, 20:19:30 pm i have the right tools:)but is it diffecult to find the right seats!
thank you udo for the tip!if they dont have i just go whit 40mm valves Title: Re: valve seats t4 1,7 l engine! Post by: Griebel on January 22, 2015, 20:46:06 pm Contact Jakob at GBOT : http://gbot.dk/
Title: Re: valve seats t4 1,7 l engine! Post by: tezer on January 22, 2015, 21:34:50 pm thank you Griebel
will do:) |