|
Title: New OEM 356/912 gen pulleys, dark brown 010 dist caps + MORE Post by: Jim Ratto on January 22, 2015, 00:44:44 am NEW Web 86B type 1 cam with unknown-brand new lifters. No box, but have cam card. $120 for the set, plus shipping. Want hand fitted dual thrust bearings with oiling mod with it? Let me know, Mahle Brazil for $26.00 or Glyco with copper face thrust surfaces for $44.00, plus shipping. Firm pricing on this stuff.
"Looks new" Melling oil pump for type 1, no cover, $25.00 plus shipping New FK89 Engle and Bugpack race lightweight lifters, $160.00 plus shipping Porsche 356/912 generator pulley halves, hubs and nuts, all new OEM: please note, these may or may not be gold cad plated... the gold cad is being phased out by many suppliers, may ship zinc plated Inner half: $22.00 plus shipping Outer half: $22.00 plus shipping Hub: $30.00 plus shipping 36mm nut, GENUINE new: $46.00 plus shipping OEM 911 swivel foot 8mm adjuster screws, not overseas copycat, the real OEM item: $22.00 ea plus shipping (locknut not included) Daikin-Exedy 200mm metal-woven Type 1 clutch discs: $72.00 plus shipping Dark brown distributor cap, German, for 010, 019 022 etc cast iron Bosch distributors: $19.00 plus shipping Schadeck 26mm new oil pumps, modded for full flow and increased volume, $55.00 plus shipping Schadeck 30mm new oil pumps, modded for full flow and increased volume $55.00 plus shipping (on the oil pumps, if I do not have them in stock, there may be a 4-5 day delay before I ship. I will also email you instructions on oil pump install in PDF format) NGK Iridium plugs for your big Weber carb'd street motor, most thread sizes and heat ranges available. Tested these in several street cars in last 5-6 years and difference in "forgiveness" in tuning big Webers using these vs copper plugs is "Night and Day". Hard to believe how well these run. Inquire with your needs. Please PM me. Thanks Title: Re: Misc HP engine stuff for sale: some new, some used; UPDATED WITH MORE ITEMS Post by: Jim Ratto on January 26, 2015, 21:31:41 pm Used Holley Red pump and low pressure regulator (sold 1-26-2015)
Want your VW heads set up to your cam? I can shim springs, set installed height and hand fit keepers/retainers for maximum life. Please inquire with your needs Title: Re: Misc HP engine stuff for sale: some new, some used; UPDATED WITH MORE ITEMS Post by: Jim Ratto on February 02, 2015, 17:41:03 pm Joe Gibbs camshaft/lifter lubricant- $7.00 tube plus shipping Title: Re: Misc HP engine stuff for sale: some new, some used; UPDATED WITH MORE ITEMS Post by: Jim Ratto on February 03, 2015, 22:03:52 pm Type 1 main bearings, steel backed # 2 shells, most sizes: $38.00
Type 1/2/3 13-1600cc Elring gasket kits, with good flywheel seal: $18.00 KS VW journal rod bearings: $16.00, std and most undersizes German "Porsche" points for 010, 019 distributor: $9.00 OEM ignition condenser for 010, 019 distributor $10.00 7100-RPM or 7300-RPM cutoff rotor for 009 Bosch: $35.00 (RPM limiting rotor) German, OEM-style ignition wire set, works better than stock with dual carburetors, solid-core, with correct connectors and air-seals: $48.00 (these look like factory, perfect for correct and original appearance). HD gold-cad plated 8mm x 1.25 socket head bolt, works great in places like bumper brackets, over-rider tubes, etc. Approx 4" in length: $3.00 ea Hazet fold-out-tray portable tool box, 190L. Folds out, 2 trays per side. Super rugged, blue enameled. German cars deserve German tools. $120.00 (ask me about other Hazet tools and tool accessories) all items subject to shipping charges, depending on order and destination. Please PM me if you have questions. Thanks Title: Re: Misc HP engine stuff for sale: some new, some used; UPDATED WITH MORE ITEMS Post by: Jim Ratto on February 09, 2015, 18:23:42 pm Did I mention we do Weber? Parts, calibration stuff, and advice. We can help.
Title: Re: New OEM 356/912 gen pulleys, dark brown 010 dist caps + MORE Post by: Jim Ratto on February 18, 2015, 05:08:21 am Bosch OEM rotors for 010, 019 $19.00 plus shipping
Title: Re: New OEM 356/912 gen pulleys, dark brown 010 dist caps + MORE Post by: pupjoint on February 22, 2015, 15:51:52 pm you have pm
Title: Re: New OEM 356/912 gen pulleys, dark brown 010 dist caps + MORE Post by: pupjoint on February 27, 2015, 07:12:08 am jim, you have pm and email.
Title: Re: New OEM 356/912 gen pulleys, dark brown 010 dist caps + MORE Post by: Jim Ratto on March 17, 2015, 22:50:08 pm 912 pulley nuts are low stock right now, more coming soon. Just FYI
Title: Re: New OEM 356/912 gen pulleys, dark brown 010 dist caps + MORE Post by: Rocket Ron on April 01, 2015, 12:48:58 pm Pulley Arrived today thank Jim
Top quality stuff 8) Title: Re: New OEM 356/912 gen pulleys, dark brown 010 dist caps + MORE Post by: Jim Ratto on April 04, 2015, 01:10:58 am Pulley Arrived today thank Jim Top quality stuff 8) Right on... glad you're happy! 8) Title: Re: New OEM 356/912 gen pulleys, dark brown 010 dist caps + MORE Post by: Jim Ratto on April 20, 2015, 23:48:30 pm More stuff on special through April..... 8) http://www.thesamba.com/vw/classifieds/search.php?username=partsfast
Thank you, Jim Title: Re: New OEM 356/912 gen pulleys, dark brown 010 dist caps + MORE Post by: Jim Ratto on May 26, 2015, 02:46:18 am bump
|