|
Title: 94mm pistons 1.300 crown 1 or more damaged used etc. anything considered. Post by: Phil West on March 03, 2015, 17:18:57 pm Hi I'm after 1,2,3 or 4 of 1.300 crown height pistons to be used for mocking up to sort my required notches on a new set.
Everything considered! Broken, damaged, missing pin, over notched, bodged, cracked. Ideal would be an old 1 (or more) JE piston with huge notches. But without notches would still be useful. Cheers Phil Title: Re: 94mm pistons 1.300 crown 1 or more damaged used etc. anything considered. Post by: Udo on March 03, 2015, 22:17:02 pm I have a set of strong JE with big notches . have to look for the comp. height
Can post pictures tomorrow Udo Title: Re: 94mm pistons 1.300 crown 1 or more damaged used etc. anything considered. Post by: Phil West on March 03, 2015, 22:31:55 pm :)
Title: Re: 94mm pistons 1.300 crown 1 or more damaged used etc. anything considered. Post by: Udo on March 04, 2015, 13:11:22 pm [attachment=1][attachment=2]
comp.height is 35mm , come with 4 pin keeper per piston - like the Bergs recommened some years ago :-) Udo Title: Re: 94mm pistons 1.300 crown 1 or more damaged used etc. anything considered. Post by: Phil West on March 04, 2015, 13:31:04 pm Hi Udo,
Unfortunately I need a 33mm comp. height for setting up my motor but thanks for looking I appreciate it. I've got a 35mm height old Wiseco set here and may have to mill off 2mm to get them right for mock up if I can't locate any of the 33mm. Cheers Phil Title: Re: 94mm pistons 1.300 crown 1 or more damaged used etc. anything considered. Post by: Udo on March 04, 2015, 15:31:23 pm No problem Phil .These can get cut off 2 mm too. And i have a set of new mahle cylinders for them - so if any body needs them call me
Udo |