|
Title: How would you jet this combo ? Post by: Fred1302S on April 12, 2015, 04:55:44 am Hello
I have a 2276cc motor with FK46 and CB 1.4:1 rocker arms. The heads are CB ultrawedgeport 46x38 and the carbs are 51.5IDA with 46 vents. CR is 11:1. The manifold are big beef ported with the heads by CB. The track is at 1500meters above the sea. The gearbox 3.55/2.21/1.58/1.21 - 3.875 with a quaife inside. I would like to have a ballpark for the jetting ? The goal is to achieve a mid to high eleven. The car is a 64 bug. i have also a FK89 but i put the FK46 this time. Thanks for your answers and feel free to tell me if something is wrong in my combo. Title: Re: How would you jet this combo ? Post by: neil68 on April 12, 2015, 07:24:27 am I recently had my 2332 cc on the Dynojet, IDA's with 44 Raptor venturies, MS230 heads 48 x 38, Raptor cam (similar to FK47), 1100 metres elevation.
I ended up with this jetting: F2 180 main 210 air 65-120 idle Title: Re: How would you jet this combo ? Post by: Chris bugster on April 12, 2015, 14:03:49 pm Combo looks good for a hard running street car.
11s are possible with this combo if the car is light enough and on slicks. If it is going to be just a racecar then more compression-13:1 Title: Re: How would you jet this combo ? Post by: Fred1302S on April 12, 2015, 15:46:33 pm Thanks for your answers. i needed to know where to begin.
the car is 700kg with me inside. :) |