|
Title: 200hp 2110cc NA IDA engine. 2016 season is right around the corner! ***SOLD*** Post by: Erlend / bug66 on August 18, 2015, 07:29:44 am Hi
I'm completing my turbo engine, and I need to sell the NA engine to finance the new set up. Best time 12.901 at SCC2014 (not optimal gearbox) Newly tuned and dynoed at JPM. 199,xx HP on the flywheel. The dyno session showed that my "new" digital MSD box was broken, so there is more than 199hp in the engine. Older analog MSD AL6 box included and working like a champ! The rotating assembly is balanced to zero. Specs: AS41 engine block, no lineboring done. Full flowed. DPR 76mm crank (VW-journals) Mahle 94mm cylinders (1 season old) Wiseco pistons with valve pockets, new rings this winter Bugpack 8mm head studs (12-point ones) CB Superrace 5,4" H-beam rods 26mm Shadek oil pump (new right before SCC) Lightened german flywheel (flattened this winter) Powerpulley Stage 2 clutch (flattened this winter) Scat Silverlight 4-puck Web 86C cam w/ 1,4 rockers CB Chromoly pushrods in Jaycee tubes CB 044 Wegdeport heads (42mm in, 37,5mm out, heads are slightly modified by JEE Racing VW650 springs with thin shims (new this winter) ca. 12-1 i CR (98 octane or E85) Short IDA intakes by JEE Racing EMPI IDA's w/ 40mm venturies (some jets and e-tubes included) AN6 fittings on the carbs CSP center pull linkage Large CB 3 3/16 stacks, and the ones that came with the carbs included 1 3/4 Gene Berg exhaust, w/ stainless A1 PhatBoy-muffler and stinger MSD distributor MSD Blaster Coil MSD 8.5mm wires MSD AL6 box MSD 3-step box Old VW fanshroud, no doghause or cooler. Dynamo with internal regulator Modified CB breather tower that actually works! Aeromotive A1000 fuel regulator, return style. Holley Black fuel pump Big 10 micron fuel filter Needed: Oil cooler, fullflow filter holder and oil lines. Fuel lines back and forth (AN6 or AN8) AN6/8 fitting under the fuel tank Located in Oslo. Could be delivered at JPM Dyno Day in October 50.000NOK / 5.500 Euros Title: Re: 200hp 2110cc NA IDA engine. 2016 season is right around the corner! Post by: Erlend / bug66 on August 18, 2015, 07:33:25 am (http://www.vwnorge.no/index.php?action=dlattach;topic=66458.0;attach=235291;image)
(http://www.vwnorge.no/index.php?action=dlattach;topic=66458.0;attach=235293;image) Title: Re: 200hp 2110cc NA IDA engine. 2016 season is right around the corner! Post by: Erlend / bug66 on August 23, 2015, 10:45:25 am Up
Title: Re: 200hp 2110cc NA IDA engine. 2016 season is right around the corner! ***SOLD*** Post by: Erlend / bug66 on August 25, 2015, 16:56:12 pm SOLD!
(http://www.vwnorge.no/index.php?action=dlattach;topic=66458.0;attach=235703) |