|
Title: The Ultra Rat! Post by: SPRasmussen on September 14, 2007, 17:04:48 pm This is my race project...
The car is a 1950 split, body is from a swedish forrest far far north. Pan is from a danish car where we cut the body up... I'm currently making a lot of mods to the pan, to get it ready for my new 2387cc engine that Johannes from JP Motorsport is makig for me. MS230 and F1 trottles is orded ( Read the rest of engine specs at our web site ) www.TeamAngoraRacing.dk/forum Right now I just finnished a 2" tranny raise to get the aksels staight ( I'm not a high ass rear guy yet ;) ) Its a lot of work, especelly with the rear tokyo bar setup that the rear shocks is mounted on... The pan has a 2" narrowed IRS system, with custom made aksels ( Heated surface ) 100mm akselends and so on... All of this end out in 944 rear vented disc, that I plan to remove and mount trums with studs. ( it to heavy and needless ) The gearbox is not disided yet, Johannes is working on something for me. ;D The gearbox will be connected to my GWD shifter... Front is a 8" Angora beam ( we makes beams ) but i'm changing that to a 5 or 6" beam, cause I need the shocks soon... ;) Currently there is a CB rack and pinion steering on it ( THATS SUCKS ) and will be replaced with annother rack and pinion ( From a Ford sierra... UPS ) Front brakes is CB vent mounted on CB dropped spindles. All of this ends out on a set of original Gssburners ( But need one more to have a set for the slicks ) The body is a 50 split, found in sweden... The patina is real but we had to make some rust but it was lucky is was only some in the heater cannels and rear innerwings... Parts was orded from Wolfparts so the job wasen't difficult... All of the original windows is removed and placed with lexan... The split Gauges is placed with Autometer in the ultra lite serie... I'm getting TSS Racing from Denmark ( http://www.tssracecars.dk/ ) making me a roll cage in cromemoly this vinter... In that roll cage I will mount the Krikey raceseat... Only one, the other is sold... Thats about it! (http://vwnettet.dk/pictures/3/2/33923/cal1.jpg?1189784923) (http://vwnettet.dk/pictures/4/2/33924/cal2.jpg?1189784926) (http://vwnettet.dk/pictures/5/2/33925/cal3.jpg?1189784932) (http://vwnettet.dk/pictures/6/2/33926/cal4.jpg?1189784933) (http://vwnettet.dk/pictures/9/2/33929/cal7.jpg?1189785027) (http://vwnettet.dk/pictures/7/2/33927/cal5.jpg?1189784938) (http://vwnettet.dk/pictures/8/2/33928/cal6.jpg?1189784948) (http://vwnettet.dk/pictures/4/3/33934/cal1.jpg?1189786208) (http://vwnettet.dk/pictures/3/3/33933/cal1.jpg?1189785965) And last the fat owner next to his car in Vänersborg... ;) (http://vwnettet.dk/pictures/2/3/33932/cal10.jpg?1189785392) Title: Re: My 1950 split racecar project! Post by: Lee on September 14, 2007, 17:16:34 pm :o BLOODY GORGEOUS CAR :-*
Title: Re: My 1950 split racecar project! Post by: Grelland on September 14, 2007, 17:40:34 pm nice car, PM to you
Title: Re: My 1950 split racecar project! Post by: Harry/FDK on September 14, 2007, 19:13:33 pm Grelland, that ROCKS.
Title: Re: My 1950 split racecar project! Post by: SPRasmussen on September 14, 2007, 19:13:57 pm Thanks man... There is a Pm back to you Roy...
One more pic from a day at the workshop where Anders stopped by... I think he's got at photo serie somewhere... (http://vwnettet.dk/pictures/1/3/33931/cal9.jpg?1189785298) Title: Re: My 1950 split racecar project! Post by: Grelland on September 14, 2007, 20:10:27 pm Grelland, that ROCKS. Not my car, I'm afraid... Roy (Grelland) ;-) Title: Re: My 1950 split racecar project! Post by: Grelland on September 14, 2007, 20:15:03 pm Thanks man... There is a Pm back to you Roy... I didnt receive it try my email at roy_grelland(a)hotmail.com Title: Re: My 1950 split racecar project! Post by: peter - belgium on September 14, 2007, 20:36:07 pm Nice car!!!
Why did you need to custom axles? (http://vwnettet.dk/pictures/6/2/33926/cal4.jpg?1189784933) Did you weld the IRS mounts more to the middle as to narrow the rear track or what is different with these custom made axles? very nice:-) Title: Re: My 1950 split racecar project! Post by: SPRasmussen on September 14, 2007, 20:45:16 pm We narrowed the rear IRS because the wheels coulden't be under the fenders..
The IRS was narrowed outside nwxt to where the bearing sits... I see if can find at pic somewhere... Title: Re: My 1950 split racecar project! Post by: SPRasmussen on September 14, 2007, 20:48:53 pm Thanks man... There is a Pm back to you Roy... I didnt receive it try my email at roy_grelland(a)hotmail.com I will try you mail then.. Title: Re: My 1950 split racecar project! Post by: BeetleBug on September 15, 2007, 13:56:02 pm Wow - way cool project and your new engine sounds wicked. Do I hear one new potential 10 sec street car with a engine from JPM? I really like your idea with a pan and tech spec that`s 100% while the shell looks old and real. As a matter of fact I`m thinking of doing something similar this winter - only time will tell.
Up above here you mention that you make your own front beams. Do you make them in alu as well? Thanks and keep posting pics. I have feeling this will one bad ass project thread. BeetleBug Title: Re: My 1950 split racecar project! Post by: Roman on September 15, 2007, 14:30:19 pm Nice, it sounds like a 250-260 hp engine!!
Are you coming to Dyno day in two weeks? Title: Re: My 1950 split racecar project! Post by: Harry/FDK on September 15, 2007, 17:41:22 pm Grelland, that ROCKS. Not my car, I'm afraid... Roy (Grelland) ;-) Title: Re: My 1950 split racecar project! Post by: SPRasmussen on September 15, 2007, 17:52:12 pm Wow - way cool project and your new engine sounds wicked. Do I hear one new potential 10 sec street car with a engine from JPM? I really like your idea with a pan and tech spec that`s 100% while the shell looks old and real. As a matter of fact I`m thinking of doing something similar this winter - only time will tell. Up above here you mention that you make your own front beams. Do you make them in alu as well? Thanks and keep posting pics. I have feeling this will one bad ass project thread. BeetleBug Thanks agian... I hope for a 10 sec car, but there may go a seson or 2 before I got the car setup right, and the balls to take it to the max... We will se... No alu beam yet, maybe later in the future. I would like on the split as well... Roman, yes I will be there at the dynoday at Jp... Looking forward to se the F1's in action... Title: Re: My 1950 split racecar project! Post by: kev d on September 15, 2007, 18:07:31 pm That is the coolest thing I`ve seen in ages!
Please keep the pics & information coming ;) Title: Re: My 1950 split racecar project! Post by: bang on September 15, 2007, 19:21:53 pm hey sp..
looking forward to see the car 2morrow.. and if i have the time i will go to dynoday aswell.. se you on the track next summer ;D Title: Re: My 1950 split racecar project! Post by: SPRasmussen on September 15, 2007, 20:51:54 pm Yeah, see you tomorrow Bang.
Opdate: Some of the bluehats will problely not like this... Okay, thought I may have to explain what I was doing here... I raised the hole innerbox to get room for the 2" tranny raise. I don't what and don't need a alu case behind me. On this way all of the original rubber will still fit in my engine room. Plus the splits have the original pikehole in there. There going to be a little customized stuff far back the the rear panel. But that should be about it... I don't need a bit hole in the rear inner fender like most do, because I'm going to run F1 thottle from jpm. Plus I wan't to use my rear innerfenders as a engine support. (http://images.thesamba.com/vw/gallery/pix/380918.jpg) (http://images.thesamba.com/vw/gallery/pix/380919.jpg) (http://images.thesamba.com/vw/gallery/pix/380920.jpg) (http://images.thesamba.com/vw/gallery/pix/380921.jpg) (http://images.thesamba.com/vw/gallery/pix/380922.jpg) (http://images.thesamba.com/vw/gallery/pix/380923.jpg) (http://images.thesamba.com/vw/gallery/pix/380924.jpg) (http://images.thesamba.com/vw/gallery/pix/380925.jpg) Title: Re: My 1950 split racecar project! Post by: BeetleBug on September 18, 2007, 08:42:39 am Nice work, who cares what the bluehats has to say ::)
3 days now without updates... I`m starving here :) BB Title: Re: My 1950 split racecar project! Post by: SPRasmussen on September 18, 2007, 09:38:13 am Yeah, I don't care... Splits are not that rare anymore...
Sorry, I laying home sick... So there is not that much opdate in the next few days... ??? Title: Re: My 1950 split racecar project! Post by: smurf67 on September 18, 2007, 10:09:05 am Awsome looking car looks a whole load of fun. Alex
Title: Re: My 1950 split racecar project! Post by: BeetleBug on September 18, 2007, 10:33:05 am God bedring!
Title: Re: My 1950 split racecar project! Post by: SPRasmussen on September 18, 2007, 12:25:19 pm Jo tak ;)
Title: Re: My 1950 split racecar project! Post by: Thomas 356 on September 18, 2007, 13:50:38 pm hi søren
yes your sick but that in the head so get back in to the Garage and get on whit the work on the split ore the Frid will be ready before the split See you friday at Burger Run #3 Title: Re: My 1950 split racecar project! Post by: SPRasmussen on September 19, 2007, 05:29:08 am Is it me there is sick in the head. You are the one that wha't to go racing in a Frido.!
That is pretty sick to me! ;D Title: Re: My 1950 split racecar project! Post by: SPRasmussen on September 19, 2007, 21:06:33 pm A day at the ofifice ;)
(http://images.thesamba.com/vw/gallery/pix/382314.jpg) Title: Re: My 1950 split racecar project! Post by: BeetleBug on September 20, 2007, 09:01:16 am Now that`s what I call a office!...And like in any other offices there is always a grumpy guy around :)
Title: Re: My 1950 split racecar project! Post by: JanneP on September 21, 2007, 09:56:11 am Awsome! Can you please tell us about the GWD shifter. I have found Gerd Weiser Düsseldorfs home page but my german is not the best. (http://www.gwd-weiser.de/images/773.jpg) Title: Re: My 1950 split racecar project! Post by: bang on September 21, 2007, 19:01:22 pm have a look on cae-racing.de
Title: Re: My 1950 split racecar project! Post by: SPRasmussen on September 22, 2007, 17:24:21 pm Opdate:
Finnish the innerbox, lots of welding and grinding ;D Found the extra Gasburner wheels, thanks Thomas356 And I got the slicks! (http://images.thesamba.com/vw/gallery/pix/382911.jpg) (http://images.thesamba.com/vw/gallery/pix/382912.jpg) (http://images.thesamba.com/vw/gallery/pix/382913.jpg) (http://images.thesamba.com/vw/gallery/pix/382914.jpg) (http://images.thesamba.com/vw/gallery/pix/382915.jpg) Title: Re: My 1950 split racecar project! Post by: BeetleBug on October 31, 2007, 13:10:27 pm Hey man - any updates from your garage?
BB Title: Re: My 1950 split racecar project! Post by: Zach Gomulka on October 31, 2007, 16:23:33 pm I really dig the raised parcel shelf! I think I may have to steal that idea from you! ;)
Title: Re: My 1950 split racecar project! Post by: SPRasmussen on November 20, 2007, 06:35:39 am HI guys...
Not much opdate right now... Got some parts home from Summit: fuel cell, air/ fuel autometer and some dragrace shocks. Yeah and a whellie bar that my roll cage builder says don't work... hmm But I was over to visit Tss racing yesterday getting the last details fixed before I drop the split off at his place... So this is the next thing there will be a opdate about is the rollcage! Stay tuned! Zach Gomulka : Do it ;) Title: Re: My 1950 split racecar project! Post by: SPRasmussen on January 09, 2008, 06:24:06 am HI again...
A little opdate before the car goes to the roll cage builder... New beam on the car, off with 8" and on with the 5" Looks a lot better... All of my opdate will from now on only be at our new forum... Sorry ;) (http://www.teamangoraracing.dk/download/file.php?id=115&t=1) (http://www.teamangoraracing.dk/download/file.php?id=77&t=1) Title: Re: My 1950 split racecar project! Post by: BeetleBug on February 26, 2009, 22:02:17 pm So... any updates?
Title: Re: My 1950 split racecar project! Post by: speedwell on February 26, 2009, 22:08:29 pm what a hoodride racer ::) ::) , she will lost some parts during the race ;D ;D ;D
Title: Re: My 1950 split racecar project! Post by: Paulus on February 27, 2009, 20:17:01 pm Very very cool car !!! Just checked your site...... Damn :o ;D
Title: Re: My 1950 split racecar project! Post by: Jakke on February 27, 2009, 21:22:45 pm nice split!! 8) and what a patina look, cool.
Title: Re: My 1950 split racecar project! Post by: SPRasmussen on July 16, 2009, 20:20:59 pm ;D
(http://www.teamangoraracing.dk/download/file.php?id=1088&t=1) Title: Re: My 1950 split racecar project! Post by: Pas on July 16, 2009, 20:50:03 pm 8) 8) 8) Cool 8) 8) 8)
Title: Re: My 1950 split racecar project! Post by: bang on July 16, 2009, 20:52:17 pm redy for the big bang at scc... :D
Title: Re: My 1950 split racecar project! Post by: SPRasmussen on July 17, 2009, 08:03:24 am Yep, Ready for SCC... But a small engine, just for fun ;)
There is going to be a big opdate tonight... Stay tuned Title: Re: My 1950 split racecar project! Post by: fahrvergnugen on July 17, 2009, 11:16:59 am &* %$# :o, this is a very cool car, keep those updates comming.
Paul. Title: Re: My 1950 split racecar project! Post by: SPRasmussen on July 18, 2009, 06:55:14 am Opdate:
Kriller and I had a good day on the split. I got the motor and tranny in, Autometer's gauges is in, parts from summit came to. Kriller made the new rack and pinion sterring, that we curvertet from a ford and then narrowed 6" to fit the split. He made everthing up to the steering wheel. Everything in Crommoly I bought a new steering wheel from summit with 2 button holes. One for launch control and one for the MDS. Plus a summit bracket to remove the steeringwheel when entering and leaving the car. Thats it for now... (http://www.teamangoraracing.dk/download/file.php?id=1094&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1095&t=1) http://www.teamangoraracing.dk/download/file.php?id=1096&t=1(http://) (http://www.teamangoraracing.dk/download/file.php?id=1097&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1098&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1099&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1100&t=1) Title: Re: My 1950 split racecar project! Post by: bang on July 18, 2009, 06:59:50 am nice.. do you want me to get that 4 cora spiral wire for the sterring wheel? i have also sone some work on my car.. 25 kilo is of now.. need 15 more and 10 kilo on my self :P
Title: Re: My 1950 split racecar project! Post by: SPRasmussen on July 18, 2009, 07:02:40 am Er der 4 ledninger i dem ? Troede kun der var 2 ?
25 kilos ;D I wanna see pictures Peter... Title: Re: My 1950 split racecar project! Post by: bang on July 18, 2009, 08:10:38 am ja der er 4 1 kvatrat ledninger i.. den er en meter lang
alt lys er pillet af nye glasfiber skærme og lexan ruder hele vejen rundt. skal til at bore huller nu ;D Title: Re: My 1950 split racecar project! Post by: SPRasmussen on July 23, 2009, 05:17:27 am ;D
(http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs172.snc1/6456_103645479938_785739938_2035911_3762595_n.jpg) Title: Re: My 1950 split racecar project! Post by: Black Sheep on July 23, 2009, 07:17:42 am Nice work very cool 8)
Title: Re: My 1950 split racecar project! Post by: Zach Gomulka on July 23, 2009, 17:02:18 pm The motor sits perfect in there with that trans raise!
Could we see a side profile picture? What size tires are you running?? Title: Re: My 1950 split racecar project! Post by: SPRasmussen on July 23, 2009, 22:05:37 pm Thanks guys...
Great Great progress day at the workshop... Got of work a little earlier and straight over at the garage. And Kriller was there to help me out the hole day... Fuelcell is in, batteri is in, fuel lines done, fram fuel filter. And engine start up And heard from the shipping company, that my JCL shifter is here tomorrow I have sold the Gasburners to magne from the forum, and fitted 4.5 & 5" org fuchs insted... The rears are M&H front are 135'er (http://www.teamangoraracing.dk/download/file.php?id=1104) (http://www.teamangoraracing.dk/download/file.php?id=1105) (http://www.teamangoraracing.dk/download/file.php?id=1106) (http://www.teamangoraracing.dk/download/file.php?id=1107) (http://www.teamangoraracing.dk/download/file.php?id=1108) (http://www.teamangoraracing.dk/download/file.php?id=1109) Title: Re: My 1950 split racecar project! Post by: Neil Davies on July 24, 2009, 08:11:04 am Nice work! Love the details like the trans and floor raise. :)
When are you painting it? ;) :P :P :D Title: Re: My 1950 split racecar project! Post by: per on July 27, 2009, 16:54:37 pm Ready for SCC ? :)
Per. Title: Re: My 1950 split racecar project! Post by: Thomas 356 on July 27, 2009, 19:49:03 pm søren cant come to the desk top right now he is in the garage getting the car ready fore his first run this weekend in denmark so he knows thar works when he is going to SCC
I cant waith to see this car in action this weekend Håber ikke det gør noget jeg har svaret på min tråd søren See you Thomas Title: Re: My 1950 split racecar project! Post by: fahrvergnugen on July 27, 2009, 20:15:00 pm (http://www.teamangoraracing.dk/download/file.php?id=1104) This car is tha bomb 8), realy dig the raised floor (i am gonna steel that idea for my oval). Does the fuelcell stil fit unther the bonnet? Paul. Title: Re: My 1950 split racecar project! Post by: SPRasmussen on July 27, 2009, 20:38:25 pm Det er het i orden Thomas ;D
Yes, as It looks now I'm gonna be ready for SCC. First "testrun" is in thisted this weekend. So I can get the last ajustments before SCC. But i'm running a little engine until next year. The big one is not ready yet ;) And yes, still fit under the bonnet. with 2 cm to go. Who says that Vw don't have space. hehe Title: Re: My 1950 split racecar project! Post by: SPRasmussen on July 27, 2009, 20:40:13 pm And hey... My new shifter has landed ;D
(http://www.teamangoraracing.dk/download/file.php?id=1123&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1124&t=1) Title: Re: My 1950 split racecar project! Post by: jimi323 on July 27, 2009, 21:16:13 pm this Car is Porn.... :o
or maybe Kinky.. ;D great work..with fuchs is perfect! Title: Re: My 1950 split racecar project! Post by: Squirmn German on July 29, 2009, 03:23:57 am Nice piece of work you have going here!
Title: Re: My 1950 split racecar project! Post by: SPRasmussen on July 30, 2009, 20:25:23 pm Thanks guys...
Allmost there ;D (http://www.teamangoraracing.dk/download/file.php?id=1128) (http://www.teamangoraracing.dk/download/file.php?id=1129) (http://www.teamangoraracing.dk/download/file.php?id=1130) (http://www.teamangoraracing.dk/download/file.php?id=1131) (http://www.teamangoraracing.dk/download/file.php?id=1132) (http://www.teamangoraracing.dk/download/file.php?id=1133) Title: Re: My 1950 split racecar project! Post by: Zach Gomulka on July 30, 2009, 22:24:02 pm That's freakin bad!!!
How the hell did you put Plexi quarter windows back in that old dried up rubber?! I love it, looks like it was done years ago! Awesome!!! Title: Re: My 1950 split racecar project! Post by: SPRasmussen on July 31, 2009, 05:14:39 am It was no problem, it just popped in at the first try ;D
But the raised floor got cut out when the role cage was buiild. He coulden't weld it with it in. So it is history :'( Title: Re: My 1950 split racecar project! Post by: SPRasmussen on August 02, 2009, 08:33:25 am First run in the new car was great...
Went to Thisted friday evening to be ready for the race the day after , and on the way up there, Bang called if I could be there before 21:30 we could get 2 passes on the strip. We made it and got the car of the trailer and after a quick warm up it was on the strip. First pass was 15.065 because I missed 2. gear. Damit >:( 2. pass and we tried again, got the 2. gear and the time was 12:98 ;) I was happy... We packed the cars on trailer and went home to Bang to make some last details on my car. Was some problems with the trottle cable, and my linelock wasen't mounted yet... We got it all fixed by 00:30 and went to bed. ( It was kind of hard to sleep ;D ) Next morning it was race day and we were off the meet up with the other vw racers from Denmark. John Elnef, Allan opstrup, Rasmus Bittetap... After 4 passed in the low 13. I fianny got the best one. 12:59 Here are some pictures from the day : (http://www.teamangoraracing.dk/download/file.php?id=1138) (http://www.teamangoraracing.dk/download/file.php?id=1140) (http://www.teamangoraracing.dk/download/file.php?id=1145) (http://www.teamangoraracing.dk/download/file.php?id=1137) (http://www.teamangoraracing.dk/download/file.php?id=1141) (http://www.teamangoraracing.dk/download/file.php?id=1142) (http://www.teamangoraracing.dk/download/file.php?id=1143) (http://www.teamangoraracing.dk/download/file.php?id=1144) Title: Re: My 1950 split racecar project! Post by: Black Sheep on August 02, 2009, 17:36:29 pm Cool pix and a pretty respectable time too 8)
Title: Re: My 1950 split racecar project! Post by: SPRasmussen on August 02, 2009, 18:45:21 pm Yeah, I'm happy with time so far...
I only have 174hp ;D Video from the day: www.youtube.com/watch?v=E77z_4B3fQs (http://www.youtube.com/watch?v=E77z_4B3fQs) Title: Re: My 1950 split racecar project! Post by: kev d on August 03, 2009, 08:30:47 am Well done!
V-cool looking car & nice pics 8) Cheers, Kev Title: Re: My 1950 split racecar project! Post by: SPRasmussen on August 12, 2009, 05:16:29 am A little nametag befora SCC ;D
(http://www.teamangoraracing.dk/download/file.php?id=1162&t=1) Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: SPRasmussen on December 13, 2009, 09:41:39 am I've gone mad ;)
(http://www.teamangoraracing.dk/download/file.php?id=1232&mode=view) (http://www.teamangoraracing.dk/download/file.php?id=1235&mode=view) (http://www.teamangoraracing.dk/download/file.php?id=1240&mode=view) (http://www.teamangoraracing.dk/download/file.php?id=1241&mode=view) (http://www.teamangoraracing.dk/download/file.php?id=1243&mode=view) http://www.teamangoraracing.dk/viewtopic.php?f=12&t=13 Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: Black Sheep on December 13, 2009, 23:03:36 pm Yup totally insane 8) love the workshop
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: Dereck on December 14, 2009, 23:33:38 pm Cool work and a lovely clean workshop. I thought your Bug was Bitchin' before, but you're moving it up a few more notches.
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: Eric Justus on December 15, 2009, 06:31:25 am i love this car :o
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: bang on December 15, 2009, 07:54:05 am engine specs for the ultra rat.
2779 oxy 86mm dpr wbx crank with wedge made flywheel, stage 1 plate and black magic fully machined wbx case made with type 1 lifters fk98 cam set on 106`lobe 4" wanolia piston with gasport and machined aa cylinders jpm 4" ms230 heads ported+ 5 bolt rockers 58mm berg ida ex. roger crawford 2" header msd + msd 7al2 box 14:1 geers alternator and wacum pump setup. 5,7" pauter rods ;D Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: Neil Davies on December 15, 2009, 09:11:45 am I've gone mad ;) You're right, you've gone completely mad! You've cut out all the bits that need repairing on my split! :D I'm a bit surprised you built it for a season then stripped it again rather than starting with a new car though! I don't think I'd have the balls to cut up a finished car! :D Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: JS on December 15, 2009, 09:24:13 am Søren built it as a street car in 2008, before he tore it apart. Again. ;D
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: vwcab on December 15, 2009, 11:32:54 am F@?kin' AWESOME :o
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: SPRasmussen on December 15, 2009, 12:19:40 pm The parts I cut out is allready sold to save another split. So something good came out of it... Sorry my pics are gone for now, our website Is down for some reason ???
A teaser ;) (http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs099.snc3/16634_202229419938_785739938_2969793_149123_n.jpg) Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: Devils speedshop on December 15, 2009, 14:47:18 pm Yes look a good looking workshop... Hope it stays that clean until I have my own cars home..
But Cutting up another Split is worth the dirt.. LOL Now I just have to make the Carbon parts for it. Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: splitblitz on December 15, 2009, 20:01:44 pm This car is a big inspiration!
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: notched on December 16, 2009, 09:01:09 am Can't wait to see how this one ends up!!
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: BeetleBug on December 16, 2009, 09:28:43 am Can't wait to see how this one ends up!! Allow me to guess; Depending on the cars weight and the driver, a high to a mid 10 sec run and 280 - 290hp without the vacum pump is where this ends up. :) Great car, great thread. Keep the updates coming. Xmas holiday is soon around the corner = plenty of time in the work shop. Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: SPRasmussen on December 16, 2009, 12:21:13 pm That my goal for next year ^^^^ Would like to give the blue split from finland some compation ;)
I have the weight before I took it apart. It was allread light before. But I have already taken 19.5kilo in metal. Not going to run with cooling fan either. Lighter Shawn geers brakes on so on... Gonna be fun to see... And thanks for the kommentens :) (http://teamangoraracing.dk/download/file.php?id=1228&t=1) (http://teamangoraracing.dk/download/file.php?id=1230&t=1) Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: roland on December 16, 2009, 13:09:58 pm very cool!
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: FIDDE on December 16, 2009, 13:16:29 pm Inspiring project real nice.
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: SPRasmussen on December 17, 2009, 06:26:29 am Shifter holder is done... Turned out pretty good Did a bit of shaving the pan, old handbrake mount is of. And when I had the chance I gave the clutch cabel tube some more welds to prevent it from going loose (http://www.teamangoraracing.dk/download/file.php?id=1271&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1272&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1273&t=1) Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: SPRasmussen on December 18, 2009, 12:17:32 pm The service car :-)
(http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs152.snc1/5656_115914764938_785739938_2210636_3292017_n.jpg) (http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs132.snc1/5656_115916334938_785739938_2210644_7236558_n.jpg) (http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs132.snc1/5656_115916339938_785739938_2210645_3304453_n.jpg) (http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs132.snc1/5656_115916349938_785739938_2210646_5084144_n.jpg) Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: Neil Davies on December 18, 2009, 12:24:43 pm Crikey! That's tight! :o
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: Black Sheep on December 18, 2009, 18:16:16 pm Think I may have to make a lwb sprinter my next van ;)
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: fahrvergnugen on December 18, 2009, 20:56:49 pm You Guy's make it look all so simple, very impressive 8)
Paul. Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: SPRasmussen on December 20, 2009, 20:46:35 pm Opdate...
Got some work done on the front today! ;D (http://www.teamangoraracing.dk/download/file.php?id=1275&mode=view) (http://www.teamangoraracing.dk/download/file.php?id=1276&mode=view) (http://www.teamangoraracing.dk/download/file.php?id=1277&mode=view) Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: 71CALRIPPER on December 21, 2009, 15:23:30 pm may i ask how you have kept the body in its current state? I have a simular state car but want to keep it patina for now but worry about it just getting worse?
Thank you Rob Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: SPRasmussen on December 21, 2009, 18:04:25 pm Notting at all, I can se It's got a little darkere over the years, but it haven't got any more rusty...
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: SPRasmussen on December 28, 2009, 21:38:06 pm Little opdate!
Looking forward to see my new stuff real life... Also my new helmet Opdate, Body back on the pan... Jcl shifter sits perfect.. Going to get the role cage done first week in the new year... So the next days it's some detail work.. (http://www.teamangoraracing.dk/download/file.php?id=1278&mode=view) (http://www.teamangoraracing.dk/download/file.php?id=1279&mode=view) Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: Unkl Ian on December 28, 2009, 22:47:14 pm may i ask how you have kept the body in its current state? I have a simular state car but want to keep it patina for now but worry about it just getting worse? If you keep it dry, by storing it indoors, it won't get much worse. Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: FIDDE on December 29, 2009, 11:49:58 am I have my car outdoors,i have not noticed any more patina.
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: Fiatdude on December 29, 2009, 18:14:26 pm Spray a couple of coats of clear over it -- if you don't want it to get worse
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: Humpty on December 30, 2009, 04:15:47 am nUtS!
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: seb66 on January 12, 2010, 17:14:57 pm this is the coolest thread of all time. its making me wanna go attack my car lol ;D
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: Fiatdude on January 12, 2010, 22:31:04 pm (http://www.teamangoraracing.dk/download/file.php?id=1279&mode=view) How dare you destroy that dash by drilling those holes for those switches Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: SPRasmussen on January 13, 2010, 06:24:25 am They where allready there when i got the car... But thinking about moving them and get them closed.
The hole inside og the car is getting new paint, and just leave the outside as it is... Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: Fiatdude on January 13, 2010, 06:46:53 am I was teasing you anyway -- don't fill them in -- just make more for the weight savings
Title: Re: My 1950 split racecar project! ( The Ultra Rat ) Post by: SPRasmussen on February 20, 2010, 07:47:23 am Car is back from rolecage "rebuild!" Time to get this project back together. First thing is making some sweet alu work, but first is make it in carton :)
Yeah, and my KCR tranny ;D (http://www.teamangoraracing.dk/download/file.php?id=1315&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1324&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1326&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1329&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1330&t=1) Title: Re: The Ultra Rat! Post by: Lee.C on February 20, 2010, 16:56:31 pm AWESOME Chassis work guys :)
Title: Re: The Ultra Rat! Post by: pancho villa on February 21, 2010, 16:57:48 pm very coool
Title: Re: The Ultra Rat! Post by: SPRasmussen on February 27, 2010, 10:18:28 am Opdate:
Final mockup is done for the split now... Today we are going to make the ones that counts ;) (http://www.teamangoraracing.dk/download/file.php?id=1338&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1339&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1340&t=1) Title: Re: The Ultra Rat! Post by: BeetleBug on February 27, 2010, 10:26:00 am Looking really good!
Keep on with the good work and I`m looking forward to see that car on the weight again after the diet. Best rgs BB Title: Re: The Ultra Rat! Post by: SPRasmussen on February 27, 2010, 10:31:36 am Uhhh, me too... Hoping for 590kg without driver ::)
Title: Re: The Ultra Rat! Post by: SPRasmussen on March 03, 2010, 06:24:32 am Getting there ;)
(http://www.teamangoraracing.dk/download/file.php?id=1345&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1346&t=1) Title: Re: The Ultra Rat! Post by: tikimadness on March 03, 2010, 09:16:00 am Looking very impressive Soren.Can you come over to holland next week and help me with the panneling? ;D ;D
Michael Title: Re: The Ultra Rat! Post by: SPRasmussen on March 03, 2010, 20:50:38 pm Thanks Michael... I hope I never have to do it again, even though is christian ( devils speed shop ) who is the master on the projekt ;D
Title: Re: The Ultra Rat! Post by: Devils speedshop on March 08, 2010, 09:19:24 am Mooohooohaaaa Im the Master... LOL
Put some of the new pic in got dammit.. Its alot of work but its an satisfaction when its done, might do it in other cars if any have the intresed of having it done, and offcourse pay for it. Christian Title: Re: The Ultra Rat! Post by: SPRasmussen on March 08, 2010, 15:32:04 pm Yeah yeah Lakejner..
Forgot the camera in the garage. New pics tonight ;D Title: Re: The Ultra Rat! Post by: SPRasmussen on March 08, 2010, 21:09:53 pm Fresh pictures:
(http://www.teamangoraracing.dk/download/file.php?id=1347&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1348&t=1) Title: Re: The Ultra Rat! Post by: SPRasmussen on March 23, 2010, 12:11:14 pm Opdate:
Redid the rear once more :-) I wasen't happy with it... Now I am! And have done some work on the rear wings and apron so they are removable... (http://teamangoraracing.dk/download/file.php?id=1362&t=1) (http://teamangoraracing.dk/download/file.php?id=1369&t=1) (http://teamangoraracing.dk/download/file.php?id=1370&t=1) (http://teamangoraracing.dk/download/file.php?id=1371&t=1) Title: Re: The Ultra Rat! Post by: seb66 on March 23, 2010, 14:49:30 pm such a good thread. Makes me wanna work on my car :D
Keep the pics coming. Totally sick 8) Title: Re: The Ultra Rat! Post by: SPRasmussen on March 30, 2010, 08:41:21 am Thanks man, now go and work on your car :D
My frontwheels are in, goes by JCL tomorrow to get a set of custom dics fittes to the wheel ;D (http://teamangoraracing.dk/download/file.php?id=1382&t=1) Title: Re: The Ultra Rat! Post by: vwcab on March 30, 2010, 09:49:03 am This is gonne be an AWESOME car when it's ready.Good job overthere.
I hope you bring it again to DDD in Bitburg like last year.Like to see it again for real. Peter ;) Title: Re: The Ultra Rat! Post by: SPRasmussen on April 17, 2010, 06:44:54 am Helmet is almost done...
(http://www.teamangoraracing.dk/download/file.php?id=1399&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1400&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1401&t=1) Title: Re: The Ultra Rat! Post by: BeetleBug on April 17, 2010, 08:28:11 am Wow, are you allowed to paint the helmet? Looks cool though!
Title: Re: The Ultra Rat! Post by: The Burnout King on April 20, 2010, 18:17:54 pm why would you not be allowed to paint the helmet?
Title: Re: The Ultra Rat! Post by: BeetleBug on April 20, 2010, 18:20:15 pm why would you not be allowed to paint the helmet? Because paint and plastic don`t mix so well. And instead of checking if the right paint is used it is easier to ban painted helmets. #10.1 Helmet - Helmet is needed in all classes. - Helmet should be approved according to NSR § 304 - Junior helmets should not weigh more than 1100 g. - It is not legal to put stickers on or paint the helmet. These are the Norwegian rules which again are taken from NHRA. Best rgs BB Title: Re: The Ultra Rat! Post by: The Burnout King on April 20, 2010, 18:36:57 pm psssst..... his helmet isnt plastic....
I would love to see where someone used some house paint or somthing to paint a helmet and it ruins it... I have sold 1000's of helmets and never heard this rule.... Pretty much every PRO Driver in the NHRA's helmet is painted.... Title: Re: The Ultra Rat! Post by: BeetleBug on April 21, 2010, 09:11:09 am This triggered my curiosity and I had to check the FIA rule book that most European rely on;
10.7 HELMETS & GOGGLES Only helmets in conformity with the standards listed on the current FIA Technical List n° 25 are accepted. As outlined under Class Requirements, drivers in all classes must wear a helmet meeting FIA standards, Snell or SFI Specifications. SFI Spec 31.1A = Snell SA, open-face helmet SFI Spec 31.2A = Snell SA full-face helmet Drivers in E.T. cars (13.99 or quicker) must use a helmet meeting Snell 2000, 2005, 2007 or SFI 31.1A, 31.2A, 31.1/2005, 41.1A, 41.2A, or 41.1/2005 Specs. Drivers in supercharged, front-engine, open-bodied cars and Funny Cars must wear a helmet meeting Snell SA2000, SA2005 or SFI 31.1A, 31.2A, or 31.1/2005 Specs. Structural modifications to helmet/visor are prohibited. Cutting of helmet or helmet visor prohibited. Helmet must remain as manufactured, except for paint scheme/graphics and permitted non-structural driver modifications to helmet visor as set forth below.Taping or similar modifications to the helmet visor made by the driver that reduce the driver’s field of vision, and are deemed safe by the driver in the driver’s judgment, is allowed at this time so long as the driver demonstrates to the technical inspectors that the purpose of the modification is to reduce distraction in the driver’s field of vision. By using such a modification to the helmet visor , the driver acknowledges and agrees that the driver deems such modification safe in the driver’s judgment consistent with the driver’s obligations. See Class Requirements. Drivers of any open-bodied car wearing an “open face” helmet must wear protective goggles. Modifications to helmet/visor/visor are prohibited. All helmets must have the appropriate certification sticker affixed inside the helmet. So apparantly the Norwegian rules are not according to the FIA rules which is not a suprise ::) Title: Re: The Ultra Rat! Post by: SPRasmussen on April 23, 2010, 11:46:35 am Done ;D
(http://teamangoraracing.dk/download/file.php?id=1413&t=1) Title: Re: The Ultra Rat! Post by: 71CALRIPPER on April 23, 2010, 11:54:04 am Spot on dude !!!
Title: Re: The Ultra Rat! Post by: SPRasmussen on April 26, 2010, 20:44:31 pm Opdate!
Got a shipment of goodies today :-) (http://www.teamangoraracing.dk/download/file.php?id=1417&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1420&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1418&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1419&t=1) Title: Re: The Ultra Rat! Post by: vwcab on May 09, 2010, 21:47:26 pm Nice feature of your car in the new "airmighty megascene" issue.
:) Title: Re: The Ultra Rat! Post by: SPRasmussen on June 10, 2010, 20:11:16 pm Yeah thanks :-)
But there is much more stuff going on right now ;D (http://www.teamangoraracing.dk/download/file.php?id=1481) (http://www.teamangoraracing.dk/download/file.php?id=1482) (http://www.teamangoraracing.dk/download/file.php?id=1483) Title: Re: The Ultra Rat! Post by: jamiep_jamiep on June 11, 2010, 07:34:38 am That looks frickin awesome!
Title: Re: The Ultra Rat! Post by: SPRasmussen on June 20, 2010, 06:33:22 am Thanks man :D
Engine is fianlly here, just need the 58 bergs from Roger Crawford. So I borrowed some 51.5'er for mockup More later today (http://www.teamangoraracing.dk/download/file.php?id=1498) Title: Re: The Ultra Rat! Post by: SPRasmussen on June 20, 2010, 18:16:38 pm ;D
(http://www.teamangoraracing.dk/download/file.php?id=1505) Title: Re: The Ultra Rat! Post by: 71CALRIPPER on June 21, 2010, 07:41:45 am DUDE WTF do you do for a living..you guys make it look very pro !!
Title: Re: The Ultra Rat! Post by: SPRasmussen on June 21, 2010, 15:57:25 pm All the money we have been saving up the last 10 years ;-)
Title: Re: The Ultra Rat! Post by: SPRasmussen on June 25, 2010, 11:27:46 am :D
(http://teamangoraracing.dk/download/file.php?id=1510&t=1) Title: Re: The Ultra Rat! Post by: Neil Davies on June 25, 2010, 12:57:13 pm I thought you weren't painting it? ;)
Title: Re: The Ultra Rat! Post by: SPRasmussen on June 25, 2010, 21:38:16 pm Only the inside ;D
(http://www.teamangoraracing.dk/download/file.php?id=1559) Title: Re: The Ultra Rat! Post by: SPRasmussen on June 30, 2010, 05:15:40 am Cage is in primer ;D
(http://www.teamangoraracing.dk/download/file.php?id=1560) (http://www.teamangoraracing.dk/download/file.php?id=1561) (http://www.teamangoraracing.dk/download/file.php?id=1562) Title: Re: The Ultra Rat! Post by: Black Sheep on June 30, 2010, 17:55:53 pm Cool bit of gift wrapping :D
Title: Re: The Ultra Rat! Post by: SPRasmussen on July 02, 2010, 21:16:31 pm He he yeah, but its gone now ;D
(http://www.teamangoraracing.dk/download/file.php?id=1570) Title: Re: The Ultra Rat! Post by: Black Sheep on July 02, 2010, 21:59:35 pm Søren , there seems to be even less split left with each of your posts 8)
That car's gonna be a proper feather weight by the time your finished 8) 8) Title: Re: The Ultra Rat! Post by: SPRasmussen on July 02, 2010, 22:09:46 pm Yeah I know, I keep finding more stuff to cut out each time I'm near it ;D
Title: Re: The Ultra Rat! Post by: Black Sheep on July 02, 2010, 22:24:11 pm You still got those heavy thing's in the doors to loose ;D ;D ;)
Title: Re: The Ultra Rat! Post by: SPRasmussen on July 02, 2010, 22:37:23 pm They are coming out pretty soon :-)
Title: Re: The Ultra Rat! Post by: Nico86 on July 03, 2010, 11:32:08 am Awesome work !
Title: Re: The Ultra Rat! Post by: SPRasmussen on July 05, 2010, 05:09:14 am Opdate:
Good day at the work shop, got a ton of work done... Now the long hours we had in winter paying of... The foile is of the alu plates we made. And is looking really good. Began the wirring, fitting the AL7 box... Fuel line are in ( gonna change them to black later ) And most important, I unraised the tranny with 1" in the back.... This meaning that I get at bit more clearence on the cabs, and hopefully wont get in trouble with the wheels hitting the inderfenders. But still a problem when the 58 arrive yahoo_nailbiting.. (http://www.teamangoraracing.dk/download/file.php?id=1576&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1577&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1578&t=1) Title: Re: The Ultra Rat! Post by: SPEEDWELL66 on July 05, 2010, 07:10:49 am He he yeah, but its gone now ;D (http://www.teamangoraracing.dk/download/file.php?id=1570) HOOOOOOOOOOOOOOOOOOOLLY F@$%#'N SH...T!!!!!!!!!!!!!!! :o :o :o :o :o :o :o INCREIBLE VOCHO! THE MEXICAN VATO Title: Re: The Ultra Rat! Post by: roland on July 05, 2010, 08:55:36 am impressive build, this is going to be a killer car!
Title: Re: The Ultra Rat! Post by: BeetleBug on July 05, 2010, 09:55:21 am Hell YEAH!!
Keep on with the good work and finish the car in time for SCC......... 2010! Best rgs BB Title: Re: The Ultra Rat! Post by: SPRasmussen on July 06, 2010, 05:16:11 am Thanks...
My plan is to get it done too scc, just one test run in denmark first. Hope I make it ;) Title: Re: The Ultra Rat! Post by: Fiatdude on July 08, 2010, 05:59:37 am Very Nice -- It just keeps getting better and better
Title: Re: The Ultra Rat! Post by: SPRasmussen on July 10, 2010, 17:55:13 pm ;D
(http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs035.ash2/35108_410883114938_785739938_4521596_6651261_n.jpg) Title: Re: The Ultra Rat! Post by: Herbie on July 10, 2010, 18:19:14 pm Nice :)
Title: Re: The Ultra Rat! Post by: kev d on July 10, 2010, 19:08:29 pm Awsome! 8)
Title: Re: The Ultra Rat! Post by: SPRasmussen on July 10, 2010, 20:11:15 pm Thanks :-)
More pics... (http://www.teamangoraracing.dk/download/file.php?id=1628&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1629&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1630&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1631&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1632&t=1) Title: Re: The Ultra Rat! Post by: SPRasmussen on July 25, 2010, 17:01:13 pm http://www.youtube.com/watch?v=neVKuw25PIU (http://www.youtube.com/watch?v=neVKuw25PIU)
Title: Re: The Ultra Rat! Post by: jamiep_jamiep on July 27, 2010, 06:46:34 am Now that looks really cool!
Title: Re: The Ultra Rat! Post by: JSL on July 27, 2010, 12:27:51 pm ;D (http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs035.ash2/35108_410883114938_785739938_4521596_6651261_n.jpg) AMAZING STUFF!!!! TRUELY!!! And I love the 3 theft deterants you have up on the back wall there! (By the main door!!!) ;D Hehehehe J Title: Re: The Ultra Rat! Post by: SPRasmussen on July 28, 2010, 18:14:17 pm Yeah, you know what they say...
"trespassers will be shot, survivors will be shot agian" ;D Opdate: (http://www.teamangoraracing.dk/download/file.php?id=1642&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1643&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1644&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1645&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1646&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1647&t=1) Title: Re: The Ultra Rat! Post by: SPRasmussen on August 04, 2010, 19:02:27 pm The Ultra Rat diet worked. 608kg ready to go without driver :-)
Best part is, that was on steel rims on the front, and heavyer backwheels :-) Title: Re: The Ultra Rat! Post by: Zach Gomulka on August 04, 2010, 20:26:13 pm :o
I think you should run original, crusty 16" wheels up front, and some widened 16's in the back. Extra weight be damned ;) Title: Re: The Ultra Rat! Post by: SPRasmussen on August 04, 2010, 20:37:25 pm Ha ha, too much work doing that... But it sure would "complete" the look :-)
Title: Re: The Ultra Rat! Post by: seb66 on August 08, 2010, 11:05:00 am my favorite thread of all time, always looking for updates! 8)
Title: Re: The Ultra Rat! Post by: SPRasmussen on August 11, 2010, 16:09:42 pm Better give you an update then :-)
(http://www.teamangoraracing.dk/download/file.php?id=1656&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1655&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1657&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1658&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1659&t=1) Title: Re: The Ultra Rat! Post by: Zach Gomulka on August 11, 2010, 16:25:26 pm Ha ha, too much work doing that... But it sure would "complete" the look :-) Too much work?! Stand back and look at what you've done already! :o I like this car, well done! Title: Re: The Ultra Rat! Post by: Black Sheep on August 11, 2010, 20:06:45 pm Søren the work you done on this is just the bollock's 8) 8) 8)
I can't wait to see it in the flesh . Glenn Title: Re: The Ultra Rat! Post by: SPRasmussen on August 13, 2010, 20:18:42 pm There 58 Bergs did fit, without having to cut more out ;D
(http://www.teamangoraracing.dk/download/file.php?id=1661&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1662&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1663&t=1) Title: Re: The Ultra Rat! Post by: Eric Justus on August 13, 2010, 21:21:17 pm What kind of linkage is that on the 58's?
Title: Re: The Ultra Rat! Post by: SPRasmussen on August 14, 2010, 06:27:14 am It some swedish build cable pull... Gonna see if it's any good :-)
Title: Re: The Ultra Rat! Post by: vwhelmot on August 14, 2010, 19:53:23 pm F*ckin awesome! That looks mean 8)
Title: Re: The Ultra Rat! Post by: Adele AW on August 14, 2010, 21:08:57 pm Missing Some Parts ? :o ;D
Title: Re: The Ultra Rat! Post by: SPRasmussen on August 14, 2010, 22:07:20 pm Yeah, can't wait to have them :-)
Live from JCL : (http://www.teamangoraracing.dk/download/file.php?id=1664&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1665&t=1) Title: Re: The Ultra Rat! Post by: SPRasmussen on August 15, 2010, 18:08:29 pm Two more ;)
(http://www.teamangoraracing.dk/download/file.php?id=1666&t=1) And I got the first prototype of the new disc bracket system :-) (http://www.teamangoraracing.dk/download/file.php?id=1667&t=1) Title: Re: The Ultra Rat! Post by: krusti67 on August 15, 2010, 22:25:41 pm :o Have just stumbled upon cal look lounge and was drawn by some kinda magic to this thread. Thought my first lounge post should be to something special.This build is awesome, always been a fan of ratty but fast bugs and the pictures are quality. Keep us all posted on progress please.
Title: Re: The Ultra Rat! Post by: red baron on August 16, 2010, 15:01:12 pm can you tell more about the cable's for the carb? Where is the point where thy split, or are two going to the front?
cheers max Title: Re: The Ultra Rat! Post by: bang on August 16, 2010, 17:00:41 pm it is this guy who makes the cable pull.
i think it is the best on the market.. http://cal-look.no/lounge/index.php/topic,13332.0.html Title: Re: The Ultra Rat! Post by: Carsten on August 19, 2010, 11:42:59 am WOOOOW ! You should take the car to the next Bad Camberg meeting ;-)
Great work ! Gives so much inspiration and small ideas . I follow it from the beginning here in the lounge. Greets from germany , Carsten Title: Re: The Ultra Rat! Post by: SPRasmussen on August 24, 2010, 11:20:38 am New pictures!
Just need the correct wheels and the engine back then I'm pretty much done ;D (http://www.teamangoraracing.dk/download/file.php?id=1674&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1675&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1678&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1680&t=1) (http://www.teamangoraracing.dk/download/file.php?id=1682&t=1) Title: Re: The Ultra Rat! Post by: 71CALRIPPER on August 24, 2010, 11:25:56 am Dude...honestly wow !!
Title: Re: The Ultra Rat! Post by: Carsten on August 24, 2010, 11:28:13 am Do you come to DasDragDay in Bitburg ? Car looks great :-) Would like to see and hear it "live" .Greets Carsten
Title: Re: The Ultra Rat! Post by: SPRasmussen on August 24, 2010, 11:30:21 am Thanks ;)
I really hope the get the engine back so I can come to Das day. I really want to try It out before the winter, so all the ajustments can be done... Title: Re: The Ultra Rat! Post by: BeetleBug on August 24, 2010, 11:31:41 am Hi Søren,
I would like to say thank you for bringing your amazing Ultra Rat to SCC. I had a good look at it and it just looks so cool out in the sun. I can`t wait to see the car where it belongs - on the strip towards a low 10 second ET. Best rgs BB Title: Re: The Ultra Rat! Post by: Carsten on August 24, 2010, 11:32:57 am Thanks ;) I really hope the get the engine back so I can come to Das day. I really want to try It out before the winter, so all the ajustments can be done... ;D Title: Re: The Ultra Rat! Post by: SPRasmussen on August 24, 2010, 11:35:51 am Hi Søren, I would like to say thank you for bringing your amazing Ultra Rat to SCC. I had a good look at it and it just looks so cool out in the sun. I can`t wait to see the car where it belongs - on the strip towards a low 10 second ET. Best rgs BB yeah, that was what everbody said. When it happend at the dyno I coulden't care less of taking the car to scc. But had some good friends at the team who said I should bring it anyway ;D Title: Re: The Ultra Rat! Post by: vwcab on August 24, 2010, 14:47:20 pm Your car is A.W.E.S.O.M.E. :o
I also hope to see it at DDD8 ;) Title: Re: The Ultra Rat! Post by: bang on August 24, 2010, 20:11:01 pm the engine is stripped and redy for cleaning and checking.. hope the crank can be done local and we can get a rod next week.
Title: Re: The Ultra Rat! Post by: Trond Dahl on August 24, 2010, 22:50:03 pm Hi Søren, I would like to say thank you for bringing your amazing Ultra Rat to SCC. I had a good look at it and it just looks so cool out in the sun. I can`t wait to see the car where it belongs - on the strip towards a low 10 second ET. Best rgs BB yeah, that was what everbody said. When it happend at the dyno I coulden't care less of taking the car to scc. But had some good friends at the team who said I should bring it anyway ;D I am really glad you have those friends! Even though I have enjoyed these pictures, I really enjoyed seing the car in person. Amazing build! Title: Re: The Ultra Rat! Post by: LGK on August 24, 2010, 23:18:51 pm the engine is stripped and redy for cleaning and checking.. hope the crank can be done local and we can get a rod next week. Hi Peter, I have a few sets of PAUTER RODS in stock,if i can help you out just let me know by pm or e-mail. It was nice talking to you last weekend. See you, Steve. Title: Re: The Ultra Rat! Post by: SPRasmussen on September 20, 2010, 14:48:49 pm Tons of thing to ajust this winter, but great to finally run it :-) The worst was the 2. gear ???
http://www.youtube.com/watch?v=bbyIq557KAQ (http://www.youtube.com/watch?v=bbyIq557KAQ) Title: Re: The Ultra Rat! Post by: Black Sheep on September 20, 2010, 14:58:59 pm Tons of thing to ajust this winter, but great to finally run it :-) The worst was the 2. gear ??? http://www.youtube.com/watch?v=bbyIq557KAQ (http://www.youtube.com/watch?v=bbyIq557KAQ) Cool to see the rat in its new racing gear :) look forward to seeing it run with its new motor 8) Title: Re: The Ultra Rat! Post by: BeetleBug on September 20, 2010, 15:47:49 pm Congrats!! Got to love the 90 degree turn after the burn out. GREAT for the spool guys :)
Title: Re: The Ultra Rat! Post by: Fiatdude on September 20, 2010, 16:21:28 pm Very nice -- gotta love that car
Title: Re: The Ultra Rat! Post by: SPRasmussen on September 20, 2010, 17:48:50 pm Thanks, It was really good racing the old girl again ;D But would have been alot more happy if the damn 2. gear have worked...
Title: Re: The Ultra Rat! Post by: Rule09 on September 21, 2010, 09:21:05 am Awsome ride! Very nice! And i saw you at bitburg this weekend!
Title: Re: The Ultra Rat! Post by: SPRasmussen on November 26, 2010, 17:38:59 pm (http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1171.snc4/154320_467934644938_785739938_5624495_6096295_n.jpg)
;D Title: Re: The Ultra Rat! Post by: Harry/FDK on December 08, 2010, 17:38:05 pm And...Volksworld !!!
Title: Re: The Ultra Rat! Post by: SPRasmussen on April 29, 2011, 21:13:55 pm Back again ;D
(http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/227347_10150170877584939_785739938_6847846_6036595_n.jpg) Title: Re: The Ultra Rat! Post by: BeetleBug on April 29, 2011, 22:18:49 pm What????
Where is the turbo! ;D As always, looking good!! Title: Re: The Ultra Rat! Post by: Black Sheep on April 29, 2011, 23:09:00 pm Nice , O natural 8)
Title: Re: The Ultra Rat! Post by: SPRasmussen on May 28, 2011, 08:50:26 am http://www.facebook.com/?ref=logo#!/video/video.php?v=3015833713963&comments (http://www.facebook.com/?ref=logo#!/video/video.php?v=3015833713963&comments)
Title: Re: The Ultra Rat! Post by: SPRasmussen on May 29, 2011, 05:34:47 am Ups, now the link should work ^^^^
Title: Re: The Ultra Rat! Post by: Flow on May 29, 2011, 10:58:24 am No... :D
I think we have to be your friend on facebook to see the video ;) Title: Re: The Ultra Rat! Post by: SPRasmussen on June 05, 2011, 21:13:47 pm http://www.youtube.com/watch?v=ZtZ1Dx32_e8 (http://www.youtube.com/watch?v=ZtZ1Dx32_e8)
;) Title: Re: The Ultra Rat! Post by: Griebel on June 05, 2011, 21:48:17 pm Congrats !! 8)
Title: Re: The Ultra Rat! Post by: Black Sheep on June 05, 2011, 22:08:18 pm Nice work Søren 8) 8)
Title: Re: The Ultra Rat! Post by: SPRasmussen on June 06, 2011, 04:56:40 am Thanks guys...
I'm a very happy man ;D Title: Re: The Ultra Rat! Post by: Elnef on June 06, 2011, 05:30:33 am Congrats
Title: Re: The Ultra Rat! Post by: Devils speedshop on June 06, 2011, 08:13:33 am Bad odds running a 1230 hp +500 gas.
And thanks for great weekend. Christian Title: Re: The Ultra Rat! Post by: SPRasmussen on June 07, 2011, 11:40:34 am More video's ;D
http://www.youtube.com/watch?v=ln-NgQlh5VA (http://www.youtube.com/watch?v=ln-NgQlh5VA) Good view of the JCL shifter in action: http://www.youtube.com/watch?v=2LKSTKzXCFU (http://www.youtube.com/watch?v=2LKSTKzXCFU) Title: Re: The Ultra Rat! Post by: AntLockyer on June 07, 2011, 13:11:17 pm AWESOME!
I really like looking at your car. Title: Re: The Ultra Rat! Post by: SPRasmussen on June 08, 2011, 13:18:53 pm Last one for now
http://www.youtube.com/watch?v=wmD6WI4Rjv4 (http://www.youtube.com/watch?v=wmD6WI4Rjv4) Title: Re: The Ultra Rat! Post by: Ragtop on June 08, 2011, 19:19:50 pm Congrats really nice time!!
Title: Re: The Ultra Rat! Post by: SPRasmussen on June 10, 2011, 07:09:16 am Next step is SCC to see if I can do it better :-)
Title: Re: The Ultra Rat! Post by: Anders-DK on June 10, 2011, 07:32:26 am Next step is SCC to see if I can do it better :-) You have done good already my friend, with or without "kukkeluebriller"! But are you sure about SCC, remember you have'nt asked your PR chief if this is okay :P :P ;D Title: Re: The Ultra Rat! Post by: SPRasmussen on June 10, 2011, 08:29:00 am Sorry Cheif, forgot everthing has to come trough you :-)
Title: Re: The Ultra Rat! Post by: Ragtop on June 10, 2011, 09:41:19 am Next step is SCC to see if I can do it better :-) Why wait? Turbo Town Shootout is next weekend ;D Title: Re: The Ultra Rat! Post by: SPRasmussen on June 10, 2011, 11:15:54 am Ha ha... Yeah sorry but haven't the time this weekend :-\
Title: Re: The Ultra Rat! Post by: Devils speedshop on June 18, 2011, 18:19:36 pm Fuck year..
Title: Re: The Ultra Rat! Post by: Devils speedshop on June 18, 2011, 18:20:51 pm last one
Title: Re: The Ultra Rat! Post by: speedwell on June 18, 2011, 20:30:54 pm ;)
Title: Re: The Ultra Rat! Post by: Nico86 on June 18, 2011, 21:13:39 pm 8)
Title: Re: The Ultra Rat! Post by: SPRasmussen on June 19, 2011, 05:57:51 am And we are off :D
Title: Re: The Ultra Rat! Post by: SPRasmussen on August 22, 2011, 16:22:42 pm New personal best at scc 2011...
ET 10,54 60 1.47 197km/h http://www.youtube.com/watch?v=j1PqwKGX2ns (http://www.youtube.com/watch?v=j1PqwKGX2ns) Title: Re: The Ultra Rat! Post by: SPRasmussen on August 29, 2011, 07:45:49 am Winter project ;D
(http://bilgalleri.dk/uploads_xl_wm/2299635.jpg?31-05-2011_14:37:39) Title: Re: The Ultra Rat! Post by: Lee.C on August 29, 2011, 18:40:11 pm Winter project ;D (http://bilgalleri.dk/uploads_xl_wm/2299635.jpg?31-05-2011_14:37:39) Now those are just pornographic!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I have been waiting for someone to use those ;) Title: Re: The Ultra Rat! Post by: SPRasmussen on September 02, 2011, 18:02:35 pm :D
http://www.youtube.com/watch?v=NYeWd5wkdyY (http://www.youtube.com/watch?v=NYeWd5wkdyY) Title: Re: The Ultra Rat! Post by: Basti on September 04, 2011, 17:58:30 pm nice! ::)
Title: Re: The Ultra Rat! Post by: SPRasmussen on June 04, 2012, 09:50:34 am New personal best: 10:49 ;)
Info and video will come soon ;D Title: Re: The Ultra Rat! Post by: magic on June 04, 2012, 10:27:11 am wow Søren.... result! Congratulations! Can it get much lower?? :o (Timewise I mean) ;D ;D ;D am looking forward to a video or two! Magic Title: Re: The Ultra Rat! Post by: Udo on June 04, 2012, 14:12:21 pm He can get faster on a better track , that is for shure :-)
Udo Title: Re: The Ultra Rat! Post by: SPRasmussen on June 04, 2012, 14:45:17 pm The track got better sunday evening, but still not with a 60 ft under 1.40. So yes, it Can go a little faster :-)
It eas nice to meet you odo, sorry you went that far to race a shitty track. Title: Re: The Ultra Rat! Post by: Eric Ellis (57HotrodVW) on June 04, 2012, 15:43:00 pm Very cool!
Does the transmission have pro rings, which allow for full throttle shifting? Title: Re: The Ultra Rat! Post by: SPRasmussen on June 04, 2012, 17:12:25 pm Yes, I run with prorings. But don't run with full trottle when shifting :-)
Title: Re: The Ultra Rat! Post by: Elnef on June 04, 2012, 17:42:39 pm Not bad the fastest air cooled car in Denmark ;)
Congrats with your win at DHB Title: Re: The Ultra Rat! Post by: Eric Ellis (57HotrodVW) on June 04, 2012, 17:53:40 pm Yes, I run with prorings. But don't run with full trottle when shifting :-) Try it - you'll like it! ;D (and I'll bet that your ET drops too) Title: Re: The Ultra Rat! Post by: bang on June 05, 2012, 14:17:00 pm Think we shall Try some taller slicks. The gearbox is a bit low for the engine and that Night helpension with better60 ft.
So have a look after some 28" tall tires. Title: Re: The Ultra Rat! Post by: richie on June 05, 2012, 15:05:36 pm Think we shall Try some taller slicks. The gearbox is a bit low for the engine and that Night helpension with better60 ft. So have a look after some 28" tall tires. M&H do 27s which might help? not surw how much taller you need to go? Soren,well done on the new PB :) I was dissapointed to not be able to make it this weekeknd,but with your comments on the track i feel a little better about missing it cheers richie Title: Re: The Ultra Rat! Post by: Udo on June 06, 2012, 05:53:23 am New personal best: 10:49 ;) Info and video will come soon ;D Waiting for my inboard video :) The one when 3 gear got out :( Udo Title: Re: The Ultra Rat! Post by: Udo on June 06, 2012, 05:54:52 am Think we shall Try some taller slicks. The gearbox is a bit low for the engine and that Night helpension with better60 ft. So have a look after some 28" tall tires. M&H do 27s which might help? not surw how much taller you need to go? Soren,well done on the new PB :) I was dissapointed to not be able to make it this weekeknd,but with your comments on the track i feel a little better about missing it cheers richie I hope they keep the track on that place now. if so in 2 year it will be good again Title: Re: The Ultra Rat! Post by: Devils speedshop on June 06, 2012, 08:29:25 am No hopeforly the turn it around again, because its much better the other way, and the road back to the pit is where there are no pepole so no broken glass, piss and garbage.
Christian Title: Re: The Ultra Rat! Post by: Anders-DK on June 06, 2012, 17:17:45 pm Congrats Søren with your PB
ET10.498 1.45 198.46 [attachment=1] Title: Re: The Ultra Rat! Post by: Anders-DK on June 06, 2012, 17:18:46 pm [attachment=1]
Title: Re: The Ultra Rat! Post by: Anders-DK on June 06, 2012, 17:21:14 pm [attachment=1]
Title: Re: The Ultra Rat! Post by: Richyrich on June 06, 2012, 23:10:58 pm Cool, Now can everyone get out the way so i can see the car....... ;D
Title: Re: The Ultra Rat! Post by: SPRasmussen on June 07, 2012, 18:43:54 pm http://www.youtube.com/watch?v=1DjBa6v9zfM&feature=youtu.be (http://www.youtube.com/watch?v=1DjBa6v9zfM&feature=youtu.be)
Title: Re: The Ultra Rat! Post by: SPRasmussen on June 08, 2012, 06:16:46 am The Finals
http://www.youtube.com/watch?v=xsBk7sUO57E&list=UUM0UGQGxLkDI4JD3wLFhKqA&index=2&feature=plcp (http://www.youtube.com/watch?v=xsBk7sUO57E&list=UUM0UGQGxLkDI4JD3wLFhKqA&index=2&feature=plcp) Title: Re: The Ultra Rat! Post by: Fredy Kucmocht on June 26, 2012, 18:31:08 pm Hello!
What size are the rear rims and how many backspace or offset does the have. Great car Thanks Fredy Title: Re: The Ultra Rat! Post by: SPRasmussen on October 13, 2012, 05:30:18 am 8.5" with 3" backspace.
Title: Re: The Ultra Rat! Post by: Fredy Kucmocht on October 15, 2012, 19:59:34 pm THX
Title: Re: The Ultra Rat! Post by: SPRasmussen on January 06, 2013, 11:48:01 am For sale !
Title: Re: The Ultra Rat! Post by: Mirco Jufer on January 06, 2013, 16:41:03 pm What is for sale? The Ultra Rat ore only the Rearwheels? ??? ???
Title: Re: The Ultra Rat! Post by: bang on January 06, 2013, 18:26:01 pm think it is the whole car turn key who is for sale.
Title: Re: The Ultra Rat! Post by: SPRasmussen on February 22, 2013, 20:56:48 pm Not for sale anymore. Keeping it until I have the motavition for Racing again.
I'll be back :-) Title: Re: The Ultra Rat! Post by: LGK on February 23, 2013, 00:27:35 am Not for sale anymore. Keeping it until I have the motavition for Racing again. I'll be back :-) Hi Soren, This is the talk we wanted to hear :) Keep in touch ! Steve |