|
Title: Jaycee pro fuel inlets Post by: chez2165 on March 22, 2016, 22:00:54 pm I am just about to fit these to my IDA's, do you need to remove the filter before fitting the Jaycee inlets or does it stay in place.
I already have an additional fuel filter inline Title: Re: Jaycee pro fuel inlets Post by: neil68 on March 23, 2016, 19:34:35 pm I removed the filter from my IDA's, as the Jaycee top fitting protrudes downward much too close to the filter. It just looks like there might be a flow disturbance (with the filter in place).
If you are stepping up to 3.0 mm needle valves, then you may want to enlarge the IDA inlet as well. Title: Re: Jaycee pro fuel inlets Post by: Bruce on March 24, 2016, 00:06:18 am You must remove the stock screen. With it in place, it blocks all flow.
You should also drill the passage leading to the inlet valve to at least 4mm. |