|
Title: DPR 82mm crank and flywheel. Kennedy stage 2 plate. CB 5.4 race rods Post by: baz on April 05, 2016, 21:22:37 pm Have an almost new DPR crank and lightened flywheel with 11/32 dowel pins, crank only used for 2 hours on dyno, was standard mains and journals but needs grinding on journals at least. £250 as is or £375 after re-grind
Kennedy stage 2 pressure plate, again 2 hours old. £60 cb race rods 5.4, again 2 hours old, I'm switching to 5.5s. £175 Will do a deal on the whole package for £450 as is or £575 after re-grind Parts are in uk west london area Title: Re: DPR 82mm crank and flywheel. Kennedy stage 2 plate. CB 5.4 race rods Post by: Jay Aldred on April 06, 2016, 07:05:02 am Why does it need a re grind ?
Title: Re: DPR 82mm crank and flywheel. Kennedy stage 2 plate. CB 5.4 race rods Post by: baz on April 06, 2016, 13:06:04 pm The engine locked up during that dyno session, oil starvation to the rods caused no 2 to lock up. Theres a thread in pure racing about it.
Cheers Edit. It was a soft lock up, went at idle and there is absolutely no heat discolouration to the rods or crank. I've bought new replacement crank as the wait for a re grind was taking the piss. Title: Re: DPR 82mm crank and flywheel. Kennedy stage 2 plate. CB 5.4 race rods Post by: baz on May 06, 2016, 15:20:53 pm Crank flywheel and clutch still here. Also got nos vw main and rod bearings available to suit first undersize.
|