Title: transmission jig Post by: nicolas on June 13, 2016, 19:27:48 pm hey,
i am rebuilding a transmission, but i don't have a transmission jig to set up the shiftforks correctly, trail and error are fun for a while, but with a jig things could be getting better quicker. i am for now looking for a type1 jig, maybe a type2 will be needed later on. so anyone with a jig collecting dust on the shelf, please let me know. i am located in Belgium. other tools for rebuilding a transmission are considered as well. please PM me Title: Re: transmission jig Post by: dragvw2180 on June 14, 2016, 03:11:02 am One of the best Jigs I ever used was one I made out of a stock case. Cut out a big U on each side of the tranny case and cut off the bell housing . It works perfectly . Mike McCarthy
Here is a link to one for sale , http://www.thesamba.com/vw/classifieds/detail.php?id=566723 Title: Re: transmission jig Post by: nicolas on June 14, 2016, 19:02:26 pm yeah… i might just do that, but i would only use a 'bad' case that has the studs or so pulled. not a good one.
cad plans for a plate work for me as well. i should be able to machine one no problem. |