|
Title: IRS camber adjustment? Post by: Nikov on July 16, 2017, 11:10:48 am Are irs rear camber adjustable trailing arms available from any vendors? If not how have others got around the problem?
Cheers Niko Title: Re: IRS camber adjustment? Post by: alex d on July 17, 2017, 08:36:08 am I recall seeing some adjustable trailing arm bushings on the STF a long time ago, don't know if they are still out there
Title: Re: IRS camber adjustment? Post by: alex d on July 17, 2017, 08:37:41 am here
http://shoptalkforums.com/viewtopic.php?f=51&t=110629&hilit=camber Title: Re: IRS camber adjustment? Post by: Nikov on July 17, 2017, 08:57:38 am Cheers Alex, I've googled it like mad and came up with nowt related and I'd searched shop talk too my computer skills need work obviously 🙄. Thanks for the link shame all the photo links are dead.
Regards Niko Title: Re: IRS camber adjustment? Post by: ibg on July 18, 2017, 00:05:05 am the 2 people I know who have made them are Marco Mansi (who used to have a web site but I can't find it) and Dave Butler in Australia https://www.facebook.com/david.butler.52831
Both were an offset trailing arm bolt. Title: Re: IRS camber adjustment? Post by: Nikov on July 24, 2017, 20:56:58 pm The problem that I see with eccentric bushes etc. is that toe and camber change with them.
I'm designing adjustable arms with spherical bearings. They'll allow toe and camber changes independently of each other. I'll be making them for 968's 944's 924's and IRS bugs/ghias of course, I've convinced my boss that this is a good idea :) Title: Re: IRS camber adjustment? Post by: Bruce on August 01, 2017, 06:35:58 am If you get early 944 steel TAs (the type that are the same as Beetle) and the spring plates from the same car, they are ride height adjustable, and camber adjustable. No need to redesign anything.
|