|
Title: Bears Rebuilt 091 with Rjes Bellhouse & First motion shaft & longer 3&4th gears. Post by: Big Al on July 04, 2018, 09:14:11 am I just bought this as a panic purchase yesterday thinking I could use parts to fix my own similar gearbox. Unfortunately after speaking to Bears this moring neither the nose or internals are compatible with my own as I have additional uprated Scat parts so back available for sale.
It's a Bears Motorsport rebuilt 091 box with new 1st and 2nd gears and longer 3rd and 4th suitable for a subaru. Never used on the road so as 'new'. Also has a Rjes Bellhouse, clutch arms and slave bracket & Subaru spline first motion shaft meaning you can run a bigger stock subaru clutch as standard. I believe it has a bus nose so will bolt right into a bus or you can get adaptors to fit in a bug. Basicslly if your going subaru in your bus this is practically a bolt in setup ready to go, or adapt to a bug with linkage adaptor and T4 to T1 gearbox mounts (think these are about 80 quid, I have 2 out or 3 parts I can throw in somewhere you will just need a top strap which I used on mine). A good 091 will set you back £700 quid, Internal parts were £1250, rjes bits £750 and built at Bears a highly recommended box builder. Looking for a quick sale Or SWAP for professional paint job on my bug. (https://preview.ibb.co/hkM81d/20180702_092039.jpg) (https://ibb.co/ddRK7J) (https://preview.ibb.co/dd2qgd/20180702_095557.jpg) (https://ibb.co/dgbxuy) (https://preview.ibb.co/jz0e7J/20180702_092109.jpg) (https://ibb.co/e6n3Zy) (https://preview.ibb.co/i89iZy/20180702_092120.jpg) (https://ibb.co/nF3XSJ) (https://preview.ibb.co/jQcgMd/20180702_092138.jpg) (https://ibb.co/f2Gxuy) (https://preview.ibb.co/eis3Zy/20180702_092215.jpg) (https://ibb.co/fFTcuy) delete speaker deck account (https://deleteacc.com/speaker-deck) |