|
Title: I have a question on a good case to buy for a 2442cc turbo?? Post by: mac770 on July 27, 2018, 01:40:09 am I just had a lifter take out my CB case. I see the CB cases are clearance for 86mm crank but nut 88mm. Should I step up and get the Scat killer case? or is there something out there I should get?
Title: Re: I have a question on a good case to buy for a 2442cc turbo?? Post by: richie on July 27, 2018, 06:53:14 am Can you existing case not be repaired? I have had them done a few times when lifter broke the case.
Scat don't have any cases at moment, TF1 is probably best choice with its dropped cam for 88mm crank but it isn't a simple bolt together, the normal ally cases will take a 88mm crank, they just might need a little hand clearancing depending on what rods you use cheers Richie Title: Re: I have a question on a good case to buy for a 2442cc turbo?? Post by: dragvw2180 on July 27, 2018, 13:15:32 pm If I remember correctly Mike at Autocraft told me his new cases are done also . Mega Machine in North Carolina has and does repair or install roller cam setups into the Cb Cases so it is more than possible to repair your case.
Title: Re: I have a question on a good case to buy for a 2442cc turbo?? Post by: mac770 on July 31, 2018, 16:19:38 pm Just got back from camping. Thanks for the replys. I'm going to take the case into a local shop today and see what they have to say.
Title: Re: I have a question on a good case to buy for a 2442cc turbo?? Post by: mac770 on August 07, 2018, 20:55:54 pm Found out my case can not be repaired. The lifter bore broke down to the oil passage. I'm going with the TF-1 case.
Title: Re: I have a question on a good case to buy for a 2442cc turbo?? Post by: Fiatdude on August 08, 2018, 02:30:20 am You will love that case
|