|
Title: 54mm ducati throttle body. Post by: Bad bug on November 04, 2018, 15:31:43 pm Good day All,
Can anyone tell me what is the measurement of the narrowest point as the bore of the throttle body gets to the butterflies. Title: Re: 54mm ducati throttle body. Post by: Bad bug on November 10, 2018, 20:27:13 pm No answer, no one has ever used these TB's on an engine.
Title: Re: 54mm ducati throttle body. Post by: Eddie DVK on November 11, 2018, 09:48:19 am I can t help you, but took some picture of a drag beetle at SCC 2018 with Ducati trottle body s on them.
Maybe some one here knows the owner. (http://www.keversite.nl/fotoalbum/fotos/145886.jpg) (http://www.keversite.nl/fotoalbum/fotos/145885.jpg) Regards Edgar Title: Re: 54mm ducati throttle body. Post by: Bad bug on November 11, 2018, 15:23:41 pm Eddie any help is appreciated. I am considering putting this on a large t4 engine injectors will be placed in the original position. If needs be i will add and additional four close to the heads.
Title: Re: 54mm ducati throttle body. Post by: Bad bug on November 11, 2018, 15:32:30 pm What pattern is he using an IDA or wider to fit the TB"s.
Title: Re: 54mm ducati throttle body. Post by: richie on November 11, 2018, 17:21:51 pm I can t help you, but took some picture of a drag beetle at SCC 2018 with Ducati trottle body s on them. Maybe some one here knows the owner. (http://www.keversite.nl/fotoalbum/fotos/145886.jpg) (http://www.keversite.nl/fotoalbum/fotos/145885.jpg) Regards Edgar Its Andreas Jonsson's car :) Title: Re: 54mm ducati throttle body. Post by: PPRMicke on November 11, 2018, 17:48:24 pm What pattern is he using an IDA or wider to fit the TB"s. The intake are shortened IDAYou have to have a distance piece with ducati bolt pattern /// Micke Title: Re: 54mm ducati throttle body. Post by: Bad bug on November 13, 2018, 00:20:10 am Does anyone have any videos of Andreas racing his bug, is he a member here on this forum.
Title: Re: 54mm ducati throttle body. Post by: numbnuts on November 13, 2018, 13:31:58 pm What Ducati are these off?
Title: Re: 54mm ducati throttle body. Post by: Eddie DVK on November 13, 2018, 13:33:13 pm I like those tb's, and knew there was an topic on here before. Found it!
http://cal-look.no/lounge/index.php/topic,23790.30.html Starts at the bottom of page 2. Title: Re: 54mm ducati throttle body. Post by: OveF on November 13, 2018, 14:28:07 pm Does anyone have any videos of Andreas racing his bug, is he a member here on this forum. Here's one from facebook: https://www.facebook.com/andreas.jonsson.98434/videos/1336843276418204/ Title: Re: 54mm ducati throttle body. Post by: AJ on November 18, 2018, 09:54:39 am Just saw this post.
Yes, it's my car, throttle bodies pictured above. I made a new shaft for the butterflies to mount them in line as it did't worked out with the ducati set up, the geometry are different when you mount them both horizontally. They are mounted on angle flow IDA intakes using a conversion plate, i also borred them out to 56mm Title: Re: 54mm ducati throttle body. Post by: Eddie DVK on November 18, 2018, 10:01:27 am Just saw this post. Yes, it's my car, throttle bodies pictured above. I made a new shaft for the butterflies to mount them in line as it did't worked out with the ducati set up, the geometry are different when you mount them both horizontally. They are mounted on angle flow IDA intakes using a conversion plate, i also borred them out to 56mm Cool... They seem to be working for you?. As I remember correctly you where driving in the 10's at SCC. Title: Re: 54mm ducati throttle body. Post by: PPRMicke on November 18, 2018, 11:14:03 am Just saw this post. Yes, it's my car, throttle bodies pictured above. I made a new shaft for the butterflies to mount them in line as it did't worked out with the ducati set up, the geometry are different when you mount them both horizontally. They are mounted on angle flow IDA intakes using a conversion plate, i also borred them out to 56mm Cool... They seem to be working for you?. As I remember correctly you where driving in the 10's at SCC. There are pictures here https://www.facebook.com/pg/Swedish-West-Coast-VW-Drag-Racers-792580740944902/photos/?ref=page_internal /// Micke Title: Re: 54mm ducati throttle body. Post by: Bad bug on November 18, 2018, 19:15:59 pm Just saw this post. Yes, it's my car, throttle bodies pictured above. I made a new shaft for the butterflies to mount them in line as it did't worked out with the ducati set up, the geometry are different when you mount them both horizontally. They are mounted on angle flow IDA intakes using a conversion plate, i also borred them out to 56mm What size engine did you have them on. I am thinking of using these on a 2.8 or 2.9ltr t4 engine. How much power di you make on your engine and what size was it. Title: Re: 54mm ducati throttle body. Post by: PPRMicke on November 18, 2018, 20:18:39 pm Just saw this post. Yes, it's my car, throttle bodies pictured above. I made a new shaft for the butterflies to mount them in line as it did't worked out with the ducati set up, the geometry are different when you mount them both horizontally. They are mounted on angle flow IDA intakes using a conversion plate, i also borred them out to 56mm What size engine did you have them on. I am thinking of using these on a 2.8 or 2.9ltr t4 engine. How much power di you make on your engine and what size was it. /// Micke Title: Re: 54mm ducati throttle body. Post by: Bad bug on November 18, 2018, 21:49:50 pm Just saw this post. Yes, it's my car, throttle bodies pictured above. I made a new shaft for the butterflies to mount them in line as it did't worked out with the ducati set up, the geometry are different when you mount them both horizontally. They are mounted on angle flow IDA intakes using a conversion plate, i also borred them out to 56mm What size engine did you have them on. I am thinking of using these on a 2.8 or 2.9ltr t4 engine. How much power di you make on your engine and what size was it. /// Micke Jesus have mercy. I wanted to do a 4 inch bore oxy with an 80mm crank but the guy doing the kit wasn't interested in doing 4 inch waterboxer heads to run on aircooled sleeves so now i have the 80mm waterboxer crank and case converted to support 94mm bore. The 2.2ltr oxy will be my first engine followed by the t4. Title: Re: 54mm ducati throttle body. Post by: PPRMicke on November 18, 2018, 22:05:28 pm Just saw this post. Yes, it's my car, throttle bodies pictured above. I made a new shaft for the butterflies to mount them in line as it did't worked out with the ducati set up, the geometry are different when you mount them both horizontally. They are mounted on angle flow IDA intakes using a conversion plate, i also borred them out to 56mm What size engine did you have them on. I am thinking of using these on a 2.8 or 2.9ltr t4 engine. How much power di you make on your engine and what size was it. /// Micke Jesus have mercy. I wanted to do a 4 inch bore oxy with an 80mm crank but the guy doing the kit wasn't interested in doing 4 inch waterboxer heads to run on aircooled sleeves so now i have the 80mm waterboxer crank and case converted to support 94mm bore. The 2.2ltr oxy will be my first engine followed by the t4. [attachment=1[attachment=1] Title: Re: 54mm ducati throttle body. Post by: Bad bug on November 19, 2018, 02:09:29 am Who makes these liners and can they be made for the T4 engine. I am looking at options as i also have on my mind the deutz liners.
Title: Re: 54mm ducati throttle body. Post by: PPRMicke on November 19, 2018, 11:25:40 am Who makes these liners and can they be made for the T4 engine. I am looking at options as i also have on my mind the deutz liners. No the question of type 4 There was no one interested (I do not want to be stupid but type4 There are so few heads for those that flow well on the exhaust side) /// Micke Title: Re: 54mm ducati throttle body. Post by: henk on November 22, 2018, 17:53:56 pm What Ducati are these off? I think ducati 999. Henk!!! Title: Re: 54mm ducati throttle body. Post by: Bad bug on November 25, 2018, 12:57:40 pm Just saw this post. Yes, it's my car, throttle bodies pictured above. I made a new shaft for the butterflies to mount them in line as it did't worked out with the ducati set up, the geometry are different when you mount them both horizontally. They are mounted on angle flow IDA intakes using a conversion plate, i also borred them out to 56mm What size engine did you have them on. I am thinking of using these on a 2.8 or 2.9ltr t4 engine. How much power di you make on your engine and what size was it. /// Micke Jesus have mercy. I wanted to do a 4 inch bore oxy with an 80mm crank but the guy doing the kit wasn't interested in doing 4 inch waterboxer heads to run on aircooled sleeves so now i have the 80mm waterboxer crank and case converted to support 94mm bore. The 2.2ltr oxy will be my first engine followed by the t4. [attachment=1[attachment=1] Who made these liners. Title: Re: 54mm ducati throttle body. Post by: PPRMicke on November 25, 2018, 20:38:35 pm Just saw this post. Yes, it's my car, throttle bodies pictured above. I made a new shaft for the butterflies to mount them in line as it did't worked out with the ducati set up, the geometry are different when you mount them both horizontally. They are mounted on angle flow IDA intakes using a conversion plate, i also borred them out to 56mm What size engine did you have them on. I am thinking of using these on a 2.8 or 2.9ltr t4 engine. How much power di you make on your engine and what size was it. /// Micke Jesus have mercy. I wanted to do a 4 inch bore oxy with an 80mm crank but the guy doing the kit wasn't interested in doing 4 inch waterboxer heads to run on aircooled sleeves so now i have the 80mm waterboxer crank and case converted to support 94mm bore. The 2.2ltr oxy will be my first engine followed by the t4. [attachment=1[attachment=1] Who made these liners. /// Micke |