|
Title: 94mm Autolinea case barrel fitment Post by: Mike Cott on October 04, 2020, 17:36:42 pm Hi all, I’ve purchased a new case that’s already been opened up to94mm, problem I have is that the Mahle barrels don’t sit in all the way, anyone else had experience with this?
(https://uploads.tapatalk-cdn.com/20201004/fdc7374e6b1cc255277f5aaab48c7268.jpg) (https://uploads.tapatalk-cdn.com/20201004/4740cd4d88d88cf5b0740fb499fd7077.jpg) In the first pic you can see a slight line round the barrel, it fits in up to that point Sent from my iPhone using Tapatalk Title: Re: 94mm Autolinea case barrel fitment Post by: Fastbrit on October 04, 2020, 18:43:26 pm Whoever machined the case didn't cut it deep enough...
Title: Re: 94mm Autolinea case barrel fitment Post by: Mike Cott on October 04, 2020, 18:59:49 pm Whoever machined the case didn't cut it deep enough... (https://uploads.tapatalk-cdn.com/20201004/5006cfd55304d1f0d76d7cc61a78ed78.jpg)They’re cut plenty deep enough Sent from my iPhone using Tapatalk Title: Re: 94mm Autolinea case barrel fitment Post by: Chip on October 04, 2020, 19:18:41 pm Is that a step on the barrel itself?
Title: Re: 94mm Autolinea case barrel fitment Post by: Mike Cott on October 04, 2020, 19:21:19 pm Is that a step on the barrel itself? Yeh they do have a slight lip which I would of thought was normal Sent from my iPhone using Tapatalk Title: Re: 94mm Autolinea case barrel fitment Post by: UltraOrange67-2443 on October 05, 2020, 17:32:00 pm My cylinders are very tight, i have to wiggle them a little ;D
Title: Re: 94mm Autolinea case barrel fitment Post by: leec on October 05, 2020, 18:00:41 pm Looking at the pic, the initial opening of the case needs to be slightly larger to except the larger stepped portion of the cylinder.
The case has been step cut, you may find the second cut needs enlarging too Title: Re: 94mm Autolinea case barrel fitment Post by: Mike Cott on October 05, 2020, 19:20:19 pm It would be a lot easier to take a little off the barrel at the step rather than taking it to a machine shop to re cut the case surely!!
What are your thoughts on that guys? Sent from my iPhone using Tapatalk Title: Re: 94mm Autolinea case barrel fitment Post by: leec on October 05, 2020, 21:14:08 pm There is always that way. Just would have to repeat if you ever replaced a barrel
Title: Re: 94mm Autolinea case barrel fitment Post by: Mike Cott on October 06, 2020, 15:02:49 pm There is always that way. Just would have to repeat if you ever replaced a barrel I reckon I’ll go with grinding the barrels down, easier for me to sort I think Sent from my iPhone using Tapatalk Title: Re: 94mm Autolinea case barrel fitment Post by: leec on October 06, 2020, 16:19:43 pm Have you tried all the barrels in one hole or all of them?
Title: Re: 94mm Autolinea case barrel fitment Post by: Mike Cott on October 06, 2020, 16:38:24 pm Have you tried all the barrels in one hole or all of them? 😂 I’ve tried them all with different barrels too 😉Sent from my iPhone using Tapatalk Title: Re: 94mm Autolinea case barrel fitment Post by: leec on October 06, 2020, 18:06:53 pm I wondered if one spigot had been machined a little tight on the case. :D
|