|
Title: 2332 engine Post by: stussyrich on December 18, 2022, 21:41:37 pm old faithful from lil stink hound. long block only.
2332cc 10.1:1 COMPRESSION RATIO. Autolinea alloy case : Full flowed, stroker clearance, 10 mm Chromoly stud kit, 15mmX10mm head nuts high strength, shuffle pinned drilled tapped oil galleys. -CRANK: CB 84 MM wedge mated forged Nitrited & counter weighted, 8 dowel, chevy journals with allen plugs, bug pack straigt cut gear set, chromoly 11/32, 8 Dowels. -RODS: Scat H beam 5.5 length with HD ARP bolts torqued to 30 LB, chevy journals stroker clearanced & balance -CAM: Web cam 86c with Bug pack straight cut gears set at top dead center, dual thrust cam bearings, -LIFTERS: Heavy duty hardened performance lifters clearance for perfect fit CB -PISTON KIT: Wiseco pistons and mahle barrels stoker set with EMPI heavy duty C clip rist pin retainers, total seal gapless #2 -HEADS: brothers large ovals. ported and custom polished finished 42X37.5 HD dual springs tinatium retainers, and keepers. -ROCKERS: CB 1.4 ratio rockers -PUSH ROD TUBS AND PUSH RODS: Stainless steel push rod tubs Windage, Chromoly 4340 3/8 strength Manton push rods cut to length w/ super cooling tin. -FlYWHEEL: Chromoly lightened flywheel 12LB, wedge mated, 11/32 8 Dowels, Kennedy stage 1 pressure plate w/cush lock disk, SCAT chromoly Gland nut with washer -PUMP: 30mm Shadek pump w/CB anodized black pump cover £5000 (http://i37.photobucket.com/albums/e63/stussyrich/65%20bug/DSCF0341.jpg) |