|
Title: gearbox build Post by: danny714 on November 25, 2007, 16:40:08 pm Thinking of putting together a close ratio type 1 box , got my head around most of what i need to do , got tools and jigs on the way , but a bit stuck on how to set up the pinion depth ? Any help would be appreciated
Title: Re: gearbox build Post by: Bruce on November 25, 2007, 18:49:48 pm Without the expensive pinion depth tools VW made, the method is to check the tooth contact pattern with prussian blue. If you go to this site, there is plenty of info in the archives:
http://www.shoptalkforums.com/viewforum.php?f=50 Here is a topic that will get you the starting point for the pinion shim: http://www.shoptalkforums.com/viewtopic.php?t=105240 Once you have a starting shim, go here to see how to check the contact patterns: http://www.shoptalkforums.com/viewtopic.php?t=91613 Title: Re: gearbox build Post by: danny714 on November 26, 2007, 21:26:27 pm cheers , some very usefull info there, are shims easily available and where from ?
Title: Re: gearbox build Post by: Bruce on November 27, 2007, 08:22:59 am cheers , some very usefull info there, are shims easily available and where from ? Other dead gearboxes. |