The Cal-look Lounge

All

Look at the pics ?

what carbs should i use on this monster and will they fit, the engine is a 2933cc.

the diameter for the carb 60mm each

By the looks of thoes manifolds you might need a set of Geers Terminators (62mm) is the bolt pattern the same as IDA's if its larger then you need terminators or make new manifolds for idas. Probally wouldn't hurt to put terminators on it anyway due to the engines size.  You can check them out at www.geersengineering.com

P.s. You have mail

Bergs :)

I agree with TBK, those manifolds are modified with a Terminator adapter plate. I think you need more welding and porting on them though and by the signs on the intake it looks like you are on your way.
Here is  a picture of my manifolds for Terminator 58:s, work done by JPM. The Bugpack IDA manifolds are 58 mm on the outside, so they are basically built with welding rod.

Sure you can run bergs, but if that flange has been changed for terminators witch it looks like it has bergs won't work. Bergs and IDA have the same bolt pattern. Terminators are a bit larger and come with new flanges to weld to your manifold. And they look exzactly like what's on thoes manifolds. But we won't really know until russell tells us more about them

Also good luck on finding bergs. Don't think there made anymore......

Thanks

Loving the geers terminators, will check profile tomorrow and let you know but i think it will be the geers ones fully polished.... Dom does it use the same linkage as a set of 48's there nothing on there site to cover that ?

Fully Polished.... I like your style! ;D

And center pull linkage will work fine, if you want the cross bar type you will have make one or modify one. Have you seen Geers Street car? He made a nice crossbar one. Its on the cover of the current Hot Vws.... I will post some pics tonight when iam at home on the computer. Right now iam on my mobile phone.....

Ps. Don't forget about the billet stacks!

I think I'd go for the as-cast look, and have the tops polished so they look cast, not machined! Spun stacks so they look like IDA ones, just bigger! ;)

 :o :o :o what are you putting these on?

Linkage Pic

(http://www.oceanstreetvideo.com/pics/geersdrkcengine.jpg)

Hello.

If you dont use cooling sys.
You can use this model of linkage.
This one is custom made by Rudy.

(http://blogsimages.skynet.be/images_v2/000/057/252/20080128/dyn009_original_592_789_jpeg_57252_b3c5fb4312f661c9eafa1dce85006dc5.jpg)



Full polished or anodised ...

(http://blogsimages.skynet.be/images_v2/000/057/252/20080128/dyn009_original_717_538_jpeg_57252_1134df2ff25cb279c731d34279a4ac22.jpg)



And dont forget the stack covers   ;D

(http://blogsimages.skynet.be/images_v2/000/057/252/20080128/dyn009_original_431_574_jpeg_57252_e3406b6fad9f198f17e62714e4d48e5f.jpg)

.

(http://i153.photobucket.com/albums/s207/Frallan2/DSCN5457.jpg)
(http://i153.photobucket.com/albums/s207/Frallan2/DSCN5456.jpg)

These are 61 mm and will be run on my 2732 TIV. Heads are e-plus.
Her you can see the adapter plate clearly prior to being welded.

Can i have some advice on the following...

1) Any idea where i can locate some New gaskets to suit my ARPM Heads, i need the ones between the manifold and head and also for the rocker covers, note they are bigger than the CB performance big ones (same height but wider)

2) Still can find a linkage kit that bolts to the geers carbs ?

Russ i am fairly sure what you need are the same as angle flow and bugpack still sell those :)  cheers richie,uk

BUGPACK Part # 4006-40 A/F Valve Cover Gaskets (pair)
BUGPACK Part # 4004-30 S/F-A/F Intake Gaskets (pair)

Hey, I know this question isnt concerning those beautiful carburetors you are talkin about, but could somebody maybe tell me what size -an fitting is used on this pic for the breather box? Would that be -an16?

Regards, Jakob

looks like either an14 or an16, looks cool in black

Richie and Rick

Thanks, Sorted now, richie you are the man, did you arrange to get the drag car yet ?

Hi Russ,not a problem :)   still trying to work the details out for collection,time isnt on my side >:(  But see what we can do :)

cheers richie

So its an14 or an16, anybody know?? Really dont wanna go bigger than the one on the picture :)

The hose isn't an ordinary breather hose, it's for a vacuum pump. You don't need anything bigger than AN-10  or -12 as breather lines.

If you want the exact size - just call Shawn Geers: 714-809-1312

Roman is correct, there -16... but its for a vacuum pump, not a breather, -12 is fine for a breather.....