|
Title: hight perf heads by steeve tims 42/37.5 with manifolds and more..... Post by: germanvador on February 22, 2008, 10:00:41 am hi loungers,
The scat trak manifolds are match ported to the heads. The heads are signature series heads with 42mm intake valves, 37.5mm exhaust valves. The heads are welded, ported, polished and I believe there is 56 cc's in the combustion chamber. The heads were built for use with a FK87 or FK89 cam. The heads are brand new, never used. I have pauter billet 1.4 roller rockers on autocraft shafts to go with these heads. I was told they flow 231 cfm. The heads are cut for 94mm pistons. They have erco triple valve springs with stainless steel valves and titanium retainers. The exhaust to use with these heads are 1 3/4". I have about $1700 into these heads. The manifolds were $250 from erco when I bought them. The roller rockers were $375. I would like to get $1350 if possible for the heads, manifolds and rockers or make an offer. these parts are in USA hawai but contact me in france............to give a address mail of my friends. thank chris (http://img78.imageshack.us/img78/2868/dscf0029ow5.jpg) (http://img245.imageshack.us/img245/8537/dscf0030qd5.jpg) (http://img156.imageshack.us/img156/5088/dscf0033pd7.jpg) (http://img156.imageshack.us/img156/6213/dscf0043pc0.jpg) (http://img156.imageshack.us/img156/3600/dscf0050ux9.jpg) Title: Re: hight perf heads by steeve tims 42/37.5 with manifolds and more..... Post by: germanvador on February 28, 2008, 14:47:03 pm !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!SOLD !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|