|
Title: berg linkage Post by: speedwell on March 25, 2008, 21:54:09 pm I have a berg linkage bought in 97 never use/mount on engine and I would have liked to know if this one adapted with all the weber carbs 40/44/48 idf and 48ida ??? thank you to leave you opinion because the person who little will be to take again my linkage to me puts me the question
cheers fabs Title: Re: berg linkage Post by: Frank LUX on March 25, 2008, 22:10:44 pm The Linkage Itself will work with whatever Carbs you have... ;)
The only difference for IDF/IDA/DRLA Carks is the Linkage Arms.... ;) You can them Seperate from the Bergs...for little money... ;) Frank Title: Re: berg linkage Post by: speedwell on March 25, 2008, 22:12:37 pm and mine frank which one is it ???
Title: Re: berg linkage Post by: Frank LUX on March 25, 2008, 22:22:47 pm and mine frank which one is it ??? Could be for IDF's, the Linkage Arms look kinda Long... But then again if the Guy you want to sell it to has short IDA Manifolds the Long Linkage Arms could work... ??? Frank Title: Re: berg linkage Post by: Roman on March 25, 2008, 22:25:26 pm It is hard to tell by the pictures, call Berg and tell them your measurements.
It is missing the lower ball joints and the carb arms, but Berg sells them separate. Title: Re: berg linkage Post by: Rick Meredith on March 25, 2008, 22:44:03 pm It is hard to tell by the pictures, call Berg and tell them your measurements. It is missing the lower ball joints and the carb arms, but Berg sells them separate. Or better yet, stop by and talk to them when you're out here! Title: Re: berg linkage Post by: JS on March 25, 2008, 22:49:44 pm Could those arms be for IDA/IDF´s on low manifolds?
Title: Re: berg linkage Post by: Scott Novak on April 03, 2008, 10:06:53 am Those linkage rods look just like mine, which is setup for Weber 40IDFs and the short Berg 580A intake manifolds .
Scott Novak Title: Re: berg linkage Post by: Kaferdog on May 05, 2008, 05:44:41 am I had the same arms and had to cut some off.... worked just fine
|