Title: welded (as in repaired) ali cases Post by: Rocket Ron on April 19, 2008, 17:09:31 pm Hi guys
Would you use a ali case with a crack that's been repaired by welding to the area around the full flow oil return for a hi power engine ? Cheers Ron Title: Re: welded (as in repaired) ali cases Post by: benssp on April 21, 2008, 14:53:22 pm I've used a Mag case which had to be repaired after the machinist got a bit carried away with the mill with no problems, JB weld should sort it out ;D
Title: Re: welded (as in repaired) ali cases Post by: ugly duckling on April 24, 2008, 05:42:24 am run it. just as long it was welded properly. thats what is nice about aluim cases they are very weld freindly. UD.
Title: Re: welded (as in repaired) ali cases Post by: Jon on April 24, 2008, 09:48:07 am As long as it can withstand the oil pressure you will be fine using it.
Title: Re: welded (as in repaired) ali cases Post by: Rocket Ron on April 24, 2008, 11:46:41 am Thanks guy for the reply but LikeI may be sorted for an engine now so dont have to worry about this now
Nice to know you can use a welded case ;) Regards Ron |