The Cal-look Lounge

RACEHEAD and Bates..... WTF is your hangup? Fricking 78 stroke is cakewalk to put together. Just build them, for cryin out loud!
 :-*

I need my case clearanced, shuffle pined and broken head stud removed - because the little motor is puking oil from a p/r tube - then i can get some piston and cylinders - redo my heads - get my dual carbs - order a cam and lifters - ect..... As soon as possible on the engine - Hey Please Help Me - Looking for Dual 44's ? ANY ONE - NEED A SET OF DUAL 44IDF'S - But how cool to have a set of 48's on a baja - Dry sumped for off road  8) Yea kiss's to you to Jim  :-*

Hey John do we have to take this cr_p from Jim ? I dont think so  >:(

Tony........Jim has no room to talk, he has been miking my motor for over a year!!!!!
WTF >:(

He sold are your stuff to me and I traded it all for a large pizza and a 10 dollar sack of weed.  ;D

Don't let Ratto push you around guys....  say, that pizza looks pretty good; I got the munchies  ;D

 ;D when you are working for a guy that cannot make up his freaking mind.....  "single port no, wait,  dual port no, wait... single port no 88's no 94's no Kadrons ...no Zenith no IDAs no IDfs no single port no Holley Bug Spray...no wait, Engle VZ15 no wait, stock, no wait I love men, no ...then again... 74 stroke, no maybe a 1300cc with 110, no then again I am on vacation for 7 months out of the year taking fish out of rivers and putting them back just so I can take pictures of them,..... can we make it a single port?"

Seems like he had time to get his own engine done - but not yours  :o - All i have is time - no money  :( - pizza and a bag o weed  ;D

Tony I think I found you a set of new 44IDFs.....  I am waiting to hear back.... let you know.

Cool - will be right here next to the computer  8)

...instead of working on your motor.... you guys...  ::)

I know i should not post here but: WHY THE FUCK AREN'T THERE NO CORRECT CYLINDER SHIMS ON THIS TAIWAN CRAP RULED PLANET ?

Excuse my language.

I think that new guy Ron Jayburn found some good ones, Harry,

Jim you act like its a "vacation" its part of my hard slaving sweating work you asshole ???
Now get my motor done ;D

I've seen you "work"   
who you trying to kid?

Typical email from sheep:

"hey assholer is my motor done? Tomorrow I'm going to snowy rock wilderness to go fish for corvina then I get back and 'work' for 2 days then I am off to Rambling Rose Mountain to fish for cornbacked brown trout then I go hiking up in Praying Mantis Meadows to chase butterflies then I go to do some presentation on how to tie hay-knots. WTF is Sarge doing?"

Because i dont have a case done yet  :P

I hope it's not at Rimco.

Awesome!!!  ;D ;D ;D

Funny that you said that, I did call them and there still going. Dont really want to send my case to them. Jim if i can get the name and # of the machine shop next to you that would be great.  AND GET BACK TO WORK - SHEEP NEEDS A CAR TO DRIVE  :'(

Yeah Jim!!!!!! >:(

here

Better yet... 8) 8) 8) ;D

WTF wants to know >:( ??

Man ,Jim sure is full of jiberish ???

I like that Yugo car lots.
Is that the dealership that Sarge works at.
I bet he is good at selling Yugos ;D

HAHA!! Remember, there IS a difference between corvina & corbina.

Carry on with the engine talk.

(pulling up a Negra Modelo and some popcorn.)

isn't a corvina some kind of Chebby?

WTF is a corvina and WTF is a Corbina.
I have never fished for either :o
And wtf is the snowy wilderness???? God Damit Jim enough with the crazy talk >:(

dude you get more and more like C.F.D. every day..... "damn kids out always runnin round"

HHahaahaha Btw CFD said Hi and he does remember chasing you in his underware hahaha

Who's the squirrel in your avatar, Jim?

I don't know that guy

So Sarge if I come by the dealership can you hook me up with a Yugo, cause I dont think Jim will ever finish my motor.

He looks a little creepy

Hahahahahahaaaa!


Looks like a perv to me... ::) ;D

Yeah he does look like a perv... Who is that freak ???

I'm just waiting for valve springs and and a case I bought from a some flake a few weeks ago. ;D

Easy boys....  Stealth is in da house :o ;)

I haven't started drinking yet ::)

Why did you stop  ??? And i need my valve spring back - o yea and my case  ;)

Jim will you get Sheep is motor - I know a guy how has a good engine for sale  ;D

Alcohol and $100,000+ machinery and $20-50,000 a day in precision parts don't mix. ;D

hey slacker John....  I finally got a good case box this week....  I'll mail your bathrobe, er i mean case up early next week. Anything else you need?

Jim, is that the case you said was opened for 88's on one side, and 94's on the other. You know, the collapsed one that locks up at about 5 pounds?

No...that's the better one of the two.

Oh, your sending the other one........

yeah the one that is .080" over, triple thrust cut, .040" over on cam bore, and has the neato o-ring all the way around the sealing surface....  oh and the Rveeco full flow setup....  groovy case....

Ahh, the custom Bergman "Can't torque my case" O- ring.

You mean I'm getting some "vintage" performance parts and I did not have to outbid the Euros ;D ::)

No rush. I don't need it for another 6 months or so, seriously.

                                             I don't think "vintage" is the proper term...

Update: I got spun on meth and turned over my motor so many time during assembly that my cylinders are wore out then my beagle attacked me. ::) ;D Sound familiar Jim?

I sense a P.U.I. here... ::) ;D

That's profiling, and profiling is wrong. ;D

" BACK AWAY FROM THE KEYBOARD...BOTH HANDS ON THE MONITOR, SON "  ::) ;D