The Cal-look Lounge

Was wondering who was using a vertigate shifter, are you happy with it & who sells them??
Cheers,
Kev

there great.

berg shifter shifts in 0.4 of a sec and now i shift in 0.2 with the MSE shifter. once you get used to it cant imagine using anything else. its even good on the street.


You can buy the MSE directly from the guy that makes it.

His name is Bill Gundrum,
         Moyer Station Enterprises
         581 Moyer,s Station Road
         Schuylkill Haven, Pa.  17972-9035
         570-754-7209

Martin, how does it work on the street, with downshifting etc? I wanted to run one but a few people said you can't really downshift with them?

Steve

Cheers Martin, will investigate ;)

you just go the oposite way! lol, if your running pro rings, then i just blip the throttle and in it goes, just like on a bike.

thy to se at cae racing. de he makes a wery nice shifter. got one in my racecar and it is so nice to use..  ;D

ron lummis make a complete set with nose for the gearbox and all. looks okay on his website.  ;)

i have one in my car i think its the best thing i bought for it works great rons kit is very good

Does seem to. Speaking of which you need to change that 10.84 @ 126mph n/a bit under your name on the left there, it's somewhere in the region of 5/10ths out!

 8)

I am with Dave on that one , except I bought mine from MSE, but I think they are all the same.

I'm with the others, MSE as well. Bill is a good guy, just make sure the instructions and nose cone match up!! :)

Cheers for that 8)

Would`nt mind a nosey at it in one of your cars sometime if thats ok? :)
Cheers,
Kev

no problem

If you need any pictures im sure we'll have some about for you to look at.

Cheers Martin, that`d be cool 8)
Kev

here's one of the shifter ;D

(http://blogsimages.skynet.be/images_v2/002/593/708/20080828/dyn008_original_750_563_jpeg_2593708_c4b358f283c63a9ef73779bdc1c626be.jpg)

Where?

  :)

hey look at that, the shiny shitter!

To the left of the steering wheel ;D

(http://i100.photobucket.com/albums/m38/54oval/DSCF3469.jpg)

They day my arrived , now sitting in Dave D OFF DRC car :)

JCL

do you need a revers leaver for the JCL shifter?

i heard they were nice.....  yum yum

No revers leaver,you just push the button on the top of the shifter,the bottom slot is revers.

Work of art that, almost a pity to put it in a car 8)

Jimmy does have some great ideas!

Well, not in car like Tekkens.. if you think the shifter is a work of art you should see the rest of the car  ;)

A statment like that needs pics!! ;D

Here is two from SCC 2008, you might get the point;

Now I get the point completely ;D
Did`nt realise that was the car you meant, I`ve seen a few pics of it & would really like to see it up close ;D
Cheers,
Kev

Its a stunning car, insirational.

My next one will be along the same lines. but it would have to be on the street like my current ride.

My next one will be along the same lines. but it would have to be on the street like my current ride.



[/quote]
Yeah, like a turbo`d show quality split was cutting corners!! ;D

its getting a little shaby now, might pull it apart over winter and re-do it. there are a few area's i' know i can make better........


then again, might go for a larger turbo and kick the crap out of it! lol

Martin

What transmission are you using in the split?

Cheers   Paul

Mendeola, swing axle

Are you going to Das Drag Day Martin?

I realy want to, but its down to the $$ at the end of the day. If i can I'll be there

Hope you can make it,maybe I'll see you there. :)