|
Title: price Post by: marko on November 15, 2006, 06:50:18 am i need know pauter rollercam price,here is picture.
http://www.pauter.com/Super%20Pro_files/rolcam4.jpg thanks Title: Re: price Post by: Tekken on November 15, 2006, 12:10:15 pm Hi,it looks like the roller lifters on the picture is Chevy smallblock.My engine is beeing built up with that kind of setup now.Lifters costs approx $420,think around $1000 in total included rollercam.With those lifters you have to get a bigger lifter bore with bussings,or you can get nice roller lifters from Schubeck with VW bore.They are quite expensive think approx $950,but are special because the roll don't have a needle bearing in the roller.If you go roller,you may have to weld your case to get it stronger around the lifter bore.It depends what type of case you are using.
-Stian |