|
Title: Jetting * please help Post by: lowfastbus on September 02, 2008, 20:42:07 pm Hi guys,
After having my engine in the car for a few years I decided to try and make it a lil bit better. When it was just finished I did a 13.5 on my first race meeting, year after 13.6, then 13.9 last year. This year i changed the gearbox ( stock 1200 to stock 1600) because it broke on the 13.9 run. I also lowered it a bit in the rear to make it more stable. I did several low 14s this year with a best off 14.04 at 97 mph. All times where on street tires with a double quiet pack (13.6 run with A1 turbo muffler) and without belt. To make it faster again I now cleaned the carbs, checked my jetting and gonna change or clean the plugs. Jetting 155 main gas 180 air corr F7 emulsion tubes 38 venturis F10/70 idle engine is a 2054 with FK10, wedge port heads and 9.5 compression Any suggestions on the jetting or other tips to make it faster would be appreciated. Thx Jelle Title: Re: Jetting * please help Post by: LGK on September 03, 2008, 11:01:00 am 1 way...get it on the dyno Jelle and go from there... I'm in the south of france right now some 30° in the sun ;) ;) I can help you out when i'm back,on the 15 september the shop will be open again! Cheers Steve Title: Re: Jetting * please help Post by: Diederick/DVK on September 03, 2008, 22:22:59 pm 38mm venturies? Don't you mean 37?
Title: Re: Jetting * please help Post by: Roman on September 03, 2008, 22:46:47 pm Try a 55 idle jet and adjust the mixture screws again.
|