|
Title: oil pressure and temp sender size Post by: wolfswest on September 26, 2008, 07:56:22 am Hi,
I'm planning to order my vdo temp and pressure senders but I have one last question. I'm going to fit these with the "Tee" fitting so I can use two senders in one place. The hole near the distributor on the left side where the original idiot light sender is... Is this 1/8 27 npt or m10 x 1 ? I have an autolinea case if this helps... thx Dem Title: Re: oil pressure and temp sender size Post by: benssp on September 26, 2008, 08:50:41 am M10 x 1 VDO#v240850 :)
Title: Re: oil pressure and temp sender size Post by: wolfswest on September 26, 2008, 09:24:53 am yeah,
but when you look in the books and most internetshops (aircooled ones) they sell the 1/8 npt models... ??? So I'm a little bit confused here? I already have a "Tee" part that I used with my autometersenders so I guess this is 1/8 npt because autometer supplies standard the 1/8 npt models... Correct me if I'm wrong Dem Title: Re: oil pressure and temp sender size Post by: benssp on September 26, 2008, 09:31:41 am You will find most autometer senders are Imperial, VDO do senders in metric, your just not checking the right shop ;D
senders http://vwheritage.com/ssp/Gauges-Senders/VDO-Senders/?srchPart=V240850 gauges http://www.vwheritage.com/ssp/Gauges-Senders/VDO-Gauges/?templateID=ssp Title: Re: oil pressure and temp sender size Post by: wolfswest on September 26, 2008, 09:43:25 am You will find most autometer senders are Imperial, VDO do senders in metric, your just not checking the right shop ;D ;D My mate has a tool to check which wire is on it... I will test it first before I order parts. my "Tee" part that I already used with my autometersenders is from vdo... Title: Re: oil pressure and temp sender size Post by: Tony M on September 26, 2008, 21:00:31 pm I use a double " T " autometer pressure sender only for the guage, wanted the idiot light too.
|