The Cal-look Lounge

Cal-look/High Performance => Pure racing => Topic started by: Lee.C on October 06, 2008, 14:59:22 pm



Title: Venturi's.........
Post by: Lee.C on October 06, 2008, 14:59:22 pm
Just wondering where I can get some various venturi's for my WEBER 40 DCN-14's  (not dcnf's) ??? ??? ???

I am looking for 28's :)


Title: Re: Venturi's.........
Post by: Jim Ratto on October 06, 2008, 23:40:18 pm
Lee, you might check with some of the Ferrari connections you may still have, as those carbs were used on Ferrari V6 (I think), Fiat, Lancia..... maybe check some of the Ferrari owners' message boards



Title: Re: Venturi's.........
Post by: Lee.C on October 06, 2008, 23:48:19 pm
Lee, you might check with some of the Ferrari connections you may still have, as those carbs were used on Ferrari V6 (I think), Fiat, Lancia..... maybe check some of the Ferrari owners' message boards



VERY good idea dude Thankyou  :)


Title: Re: Venturi's.........
Post by: Lee.C on October 07, 2008, 16:49:27 pm
Guys I have been searching EVERYWHERE and I can't find ANYONE with these venturi's - it turns out they are they same as DCNF's but stiilno one has them  :'(


Title: Re: Venturi's.........
Post by: Jim Ratto on October 07, 2008, 18:27:58 pm
Guys I have been searching EVERYWHERE and I can't find ANYONE with these venturi's - it turns out they are they same as DCNF's but stiilno one has them  :'(

did you try Pierce Manifold in Gilroy California? They have EVERYTHING


Title: Re: Venturi's.........
Post by: Lee.C on October 07, 2008, 19:42:12 pm
Guys I have been searching EVERYWHERE and I can't find ANYONE with these venturi's - it turns out they are they same as DCNF's but stiilno one has them  :'(

did you try Pierce Manifold in Gilroy California? They have EVERYTHING

Good call jim I will drop them an email :)


Title: Re: Venturi's.........
Post by: Jim Ratto on October 07, 2008, 20:47:24 pm
yeah check out this page: http://www.piercemanifolds.com/calpart.pdf

you need part number 72106.028 or 72106.28

 ;)


Title: Re: Venturi's.........
Post by: Lee.C on October 07, 2008, 22:17:58 pm
yeah check out this page: http://www.piercemanifolds.com/calpart.pdf

you need part number 72106.028 or 72106.28

 ;)

yep I just checked that dude - I will email them later - cheers dude  :)


Title: Re: Venturi's.........
Post by: Martin Greaves on October 07, 2008, 22:39:51 pm
Lee i take it you have already try here.

www.dellorto.co.uk


Title: Re: Venturi's.........
Post by: Lee.C on October 07, 2008, 22:55:58 pm
Lee i take it you have already try here.

www.dellorto.co.uk

Just checked dude and like most other outlets they don't carry parts for "old Crappy" dcn's - I will insist on using this old rubbish  ;) :)


Title: Re: Venturi's.........
Post by: alex d on October 08, 2008, 08:44:50 am
do venturies from DCNFs or DCNVs fit?


Title: Re: Venturi's.........
Post by: Lee.C on October 08, 2008, 12:58:08 pm
do venturies from DCNFs or DCNVs fit?

yes as i mentioned DCNF venturi's also fit  :)


Title: Re: Venturi's.........
Post by: alex d on October 08, 2008, 14:48:11 pm
do venturies from DCNFs or DCNVs fit?

yes as i mentioned DCNF venturi's also fit  :)

then you should ask simca or talbot guys, they used several DCNV versions, at least here in Spain


Title: Re: Venturi's.........
Post by: nicolas on October 08, 2008, 18:20:52 pm
you said 'dude'  ;D


so you are getting all the parts together, that should be good, shoul make a tread in the in the works section and let us all know how this engine changes performance wise and how the gas millage is.


Title: Re: Venturi's.........
Post by: Lee.C on October 08, 2008, 18:32:34 pm
you said 'dude'  ;D


so you are getting all the parts together, that should be good, shoul make a tread in the in the works section and let us all know how this engine changes performance wise and how the gas millage is.

Good Idea dude - I am still waiting on the DDS linkage to arrive (and my arm to heal) then I will make a proper start :)