The Cal-look Lounge

The Cal-look classifieds => Wanted => Topic started by: Shubee2 (DSK) on December 17, 2006, 00:02:08 am



Title: Wanted Early Gauge Dash Grill's See Pictures
Post by: Shubee2 (DSK) on December 17, 2006, 00:02:08 am
Hi Guys I Am Looking For A Dash Grill Like The One Pictured in This Section Does anyone know anything about them I Need Both Grills for a Left Hand Drive Look at the Pictures let me Know If You Know Where I Can Get Them Thanks Shubee Light Blue car is a Right hand Drive I Want The same Grill's but for a Left Hand Drive Any Info?


Title: Re: Wanted Early Gauge Dash Grill's See Pictures
Post by: Rick Meredith on December 17, 2006, 02:36:53 am
Wow, those are sweet Shubee! I'v enever seen them before. Good Luck.


Title: Re: Wanted Early Gauge Dash Grill's See Pictures
Post by: The Ideaman on December 17, 2006, 03:43:23 am
I want one too!  That would be perfect for my 67.


Title: Re: Wanted Early Gauge Dash Grill's See Pictures
Post by: Zach Gomulka on December 17, 2006, 06:56:12 am
Doesnt look too hard to make. Maybe a little time consuming, but it looks fairly easy.


Title: Re: Wanted Early Gauge Dash Grill's See Pictures
Post by: Olaf A./DFL on December 17, 2006, 13:45:24 pm
just like tobi postet on the picture thread:
Hi Shubee,
just have a look at the following site:

http://www.kaefervwrostfrei.de/

Just click on "Instrumentengitter ab Bj. 57".
Bye,

Tobi

these are very high quality and he can be made according to your wishes


Title: Re: Wanted Early Gauge Dash Grill's See Pictures
Post by: . on June 21, 2007, 09:44:58 am
http://www.thesamba.com/vw/classifieds/detail.php?id=452156


Title: Re: Wanted Early Gauge Dash Grill's See Pictures
Post by: louisb on June 21, 2007, 15:57:51 pm
just like tobi postet on the picture thread:
Hi Shubee,
just have a look at the following site:

http://www.kaefervwrostfrei.de/

Just click on "Instrumentengitter ab Bj. 57".
Bye,

Tobi

these are very high quality and he can be made according to your wishes

I really like that tach gauge single grill. I have been trying to figure out how to mount the tack on my '67 without having it sticking up in the window. I may go with the single tach, single fuel on the other side, then oil temp, oil pres & volts where the radio is now. (All VDO Series 1 guages)

--louis


Title: Re: Wanted Early Gauge Dash Grill's See Pictures
Post by: Shubee2 (DSK) on June 21, 2007, 19:13:38 pm
Thanks Richard I am a little ahead of the Game I Had John at Grumpys Metal Fab Make This One up I told him after seeing the right side he was making that he needed to make the left side. I had Bought a set of gauge panels from germany but they were made from a stock grill  and were 2 piece The One's On Samba Are One Piece and Are Made really Nice he made them to fit 67 and older dashes so you dont have a gap around the panel like you do on after market panels I am not sure if the will fit 68 and later with a dash pad..   I bought two Sets  Since they are all hand made you never know how long or how many will be made..  here is his website http://www.grumpysmetal.com/index.html     He Also Dose VW Only RUST REPAIR and will take on any custom metal project but I can tell you He is good and you get what you Pay for if you talk to John Tell him Gary From Texas Sent you!! lol


Title: Re: Wanted Early Gauge Dash Grill's See Pictures
Post by: Shubee2 (DSK) on June 21, 2007, 20:13:34 pm
Heres the two sets I got today the grills in the plastic are from Grumpy's Metal Fab. The Yellow ones are from Germany and are stock grills with a ring welded to the front they are two piece I did not like the way the grill bars looked  I sold The Yellow ones when I found Grumpys would make them up... how I wanted them... ;D ;D ;D


Title: Re: Wanted Early Gauge Dash Grill's See Pictures
Post by: Shubee2 (DSK) on June 21, 2007, 22:42:19 pm
just like tobi postet on the picture thread:
Hi Shubee,
just have a look at the following site:

http://www.kaefervwrostfrei.de/

Just click on "Instrumentengitter ab Bj. 57".
Bye,

Tobi

these are very high quality and he can be made according to your wishes
http://www.kaefervwrostfrei.de/  are the Grills from Germany and are made out of stock grills with a ring welded on the outside  See Pictures  Look at the pictures above or what did you get in the mail to see the differences in the Grills


Title: Re: Wanted Early Gauge Dash Grill's See Pictures
Post by: Shubee2 (DSK) on June 22, 2007, 03:22:24 am
Here are two more Grills I am Trying to get him to Make