The Cal-look Lounge

Cal-look/High Performance => Cal-look => Topic started by: Sam K on February 10, 2009, 01:35:38 am



Title: Washington anti-shocker opinions
Post by: Sam K on February 10, 2009, 01:35:38 am
I've had an anti-shocker sitting around for a decade or so and I always seem to forget about it when I have the engine out of my bug. I'm planning on lowerimg my compression next month and I was thinking of giving it a shot. Does anybody here have any experience, good or bad with these things? It seems like a good idea in theory.


Title: Re: Washington anti-shocker opinions
Post by: Jason Foster on February 10, 2009, 03:25:02 am
I ran one for awhile but ended up taking it off. Lots of guys run lots of different types. The S/G car I crew chief still has one on it but I think there really is no proof of what setting works best or when boils down to personal preference I think it's not really needed but it can't hurt.


  One thing I've seen happen though is without a side load adapter on it the seals will wear out and they can leak and end up not allowing the clutch to fully engage causing a slipping burned up clutch.


Title: Re: Washington anti-shocker opinions
Post by: bugkeeper on March 08, 2009, 10:42:32 am
I made my own Washington Anti Shocker. I ordered a ACE Industry shock (MA225) and made a bracket.  ::)

(http://images.thesamba.com/vw/gallery/pix/530180.jpg)

(http://images.thesamba.com/vw/gallery/pix/530182.jpg)

I hope it will protect my drivetrain now that I have installed my freshly rebuild ZF LSD  :D

(http://images.thesamba.com/vw/gallery/pix/530178.jpg)


Title: Re: Washington anti-shocker opinions
Post by: numbnuts on May 17, 2018, 08:19:11 am
Old thread but any more info on this Washington anti shocker?


Title: Re: Washington anti-shocker opinions
Post by: Erlend / bug66 on May 18, 2018, 05:22:12 am
I don’t get why you want to slip the clutch going to 2/3/4. gear..



Title: Re: Washington anti-shocker opinions
Post by: modnrod on May 18, 2018, 06:40:27 am
If it takes a 1/2 second to release fully, then I guess from the upright position it takes a 1/2sec to go the other way too when you change gear, so it won't have time to fully engage.
I think? Maybe?
LOL! Dunno, but if it works it's great.


Title: Re: Washington anti-shocker opinions
Post by: numbnuts on May 18, 2018, 12:08:08 pm
need something to work in 1st only?