|
Title: Berg carbs or terminators Post by: ottobros on February 16, 2009, 18:15:22 pm wanted Berg 58 carbs or 62 carbs for my new engine can you help me guy's ::)
Otto Bros ;D Title: Re: Berg carbs or terminators Post by: sven on February 16, 2009, 21:41:34 pm Hi Leo,
I have heard that they don' make the 58 Berg anymore. I know that Steve has still 62 Terminators. Sven Title: Re: Berg carbs or terminators Post by: bang on February 16, 2009, 22:08:32 pm berg does nok make the 58 anymore. but put an ad on callook lounge.com i found a set there.
Title: Re: Berg carbs or terminators Post by: ottobros on February 17, 2009, 18:49:15 pm Thanks guy's
Bud i like to buy 58 Bergs day are smaller then the geers carbs :P leonard Title: Re: Berg carbs or terminators Post by: GreenTom on February 17, 2009, 19:04:46 pm Put a propper EFI System...
Title: Re: Berg carbs or terminators Post by: Roman on February 17, 2009, 19:52:09 pm I have had both Berg Carbs and Terminators and the Bergs were a lot easier to tune.
As I didn't have them on the same engine I can't tell you who made the most power. BTW, Terminators are availible in both 58 and 61 mm dia - yes, that's right! The Terminator 62's are 61 mm! Title: Re: Berg carbs or terminators Post by: Frallan on February 17, 2009, 21:48:52 pm Yes Roman and most advertized 51,5 carbs are not more than 51,1 to 51,3 mm.
I was surprised for sure. I even had a thread on STF on that topic and the fact that the size of a commonly called 1914 cc engine is more a 1915. Title: Re: Berg carbs or terminators Post by: LGK on February 17, 2009, 23:46:19 pm Guys... Check this;
" CHOOSE YOUR POISON " :o :o :o :o Title: Re: Berg carbs or terminators Post by: 58vw on February 18, 2009, 04:27:04 am nice collection ;D
Title: Re: Berg carbs or terminators Post by: stealth67vw on February 18, 2009, 05:23:15 am Yes Roman and most advertized 51,5 carbs are not more than 51,1 to 51,3 mm. I was surprised for sure. I even had a thread on STF on that topic and the fact that the size of a commonly called 1914 cc engine is more a 1915. and a 1776 is actually a 1775. Do the math. Title: Re: Berg carbs or terminators Post by: BeetleBug on February 18, 2009, 09:04:38 am You can buy these 58 Berg and get the following in the same deal;
1974 rally beetle 2,9l T4 Pauter heads 52 x 42 valves Scat roller rockers Scat US made crank 58mm Berg carbs Pauter rods BAS gearbox with locking diff KW fully adjustable suspension Disc brakes all around Dry sump Axles from Powertrain Hydraulic parking brake All this for 7 930 EUR or bids. Tlf. +4791392744 - kentandberg@gmail.com Title: Re: Berg carbs or terminators Post by: Rick Sadler on February 18, 2009, 21:23:00 pm Yes Roman and most advertized 51,5 carbs are not more than 51,1 to 51,3 mm. I was surprised for sure. I even had a thread on STF on that topic and the fact that the size of a commonly called 1914 cc engine is more a 1915. and a 1776 is actually a 1775. Do the math. That's why we now have all of our 69mm c/w cranks offset ground to 69.00395963 mm so that is no longer a problem. Thanks John ;) Title: Re: Berg carbs or terminators Post by: Roman on February 18, 2009, 23:19:39 pm Guys... Check this; " CHOOSE YOUR POISON " :o :o :o :o Hey, I think the Terminators closest to the camera are my old ones! I sold them to Steve and I recognize them by the dirty "remove before flight sign"! Title: Re: Berg carbs or terminators Post by: LGK on February 19, 2009, 22:41:38 pm Guys... Check this; " CHOOSE YOUR POISON " :o :o :o :o Hey, I think the Terminators closest to the camera are my old ones! I sold them to Steve and I recognize them by the dirty "remove before flight sign"! Hi Roman,how he's going there...any progress on your throttle body's ;) ;) Title: Re: Berg carbs or terminators Post by: Bewitched666 on February 20, 2009, 13:19:13 pm Check with Jack Sacchette at jaycee 8)
Title: Re: Berg carbs or terminators Post by: bang on February 20, 2009, 16:47:51 pm got my berg 58 today ;D
Title: Re: Berg carbs or terminators Post by: Roman on February 20, 2009, 19:41:50 pm Guys... Check this; " CHOOSE YOUR POISON " :o :o :o :o Hey, I think the Terminators closest to the camera are my old ones! I sold them to Steve and I recognize them by the dirty "remove before flight sign"! Hi Roman,how he's going there...any progress on your throttle body's ;) ;) They were almost done when JPM called and told me they were too small! The area is now equal to a 60 mm round TB, but with oval butterflies. My heads are updated and it flows 302 cfm@16mm now with both the manifolds and the throttle bodies assembled. The air horns are not finished so JPM made some clay ones. It is "just" the carbon air horns and a wire linkage left. I will make some drawings next week for the mold and then off to a 5-axis CNC. |