The Cal-look Lounge

Hi!

After hangin around as a guest for a long time now introducing my own project! First of all something about me and the history of my car:

My name is Wesley Joosten aka Wez,
I'm a 20 (allmost 21) year old student and musician from the Netherlands.

(http://lh5.ggpht.com/_YxCA7yNOduQ/SgILUyPnjZI/AAAAAAAACyU/3Pb23yzPbwU/429393261_5_iDjJ.jpg)
 
But that's just the boring part...
Here comes the better part!

My car:

Model 1200 spärkäfer(economy) built in 1967 pre aug. One year only as you probably know. White with red interior.
Still original and complete when I got it three years ago. I was looking for a VW for allmost a year allready when I saw this one on the internet for sale.
My grandpa and my dad restored a 1302 convertible when I was really young so I guess it all started then...

My grandpa was allways looking on the internet together with me. When I emailed this car he called the owner. We made an appointment to go take a look at the car.
When I was looking at it as a 17 y.o boy my grandpa allready bought it for me as a suprise... So here the story really starts! Got my first car ;D
It was standing outside for allmost 14 years but was in a pretty good shape.
All brakes where locked but we got it moving and took it home next week...
and after a good cleaning it was white again instead of brown/green and growing.

(http://www.keversite.nl/fotoalbum/fotos/47827.jpg)

The target was to get it fixed up and running before I got my licence so we started working in the weekends. Me and my grandpa.
We got the engine running, renewed the complete braking system. But whe had little time and as we all know, the more you work on a car the more parts you'll find that are broken, damaged or missing.

And then...
Big set-back... My grandpa got a tumor in his brains. While he was fighting in hospital I was fighting to get the car ready. They couldn't help him anymore and my knowledge about cars was not enough to finish it on my own. During my long visits in hospital we allways spoke about the car. It was the only thing he still recognized.  :(
I got help from a vw shop with my car and that guy did all the welding and we got it up and running. One last cleaning job and my mom drove it in fornt of the hospital so my grandpa could see it. Mission one: completed.
I turned 18 'bout 2 moths before that and started with my license. My grandpa was doing worse every day. I got my license and told him, we cheered together and the day after he died...

He learned me so much. Helped me with everything and was my walking repair manuel. This car is really special and is staying for ever!
But hey, live goes on!

After driving it for a while i wanted to change it more my style:
I lowered the front and bought a roofrack:

(http://www.keversite.nl/fotoalbum/fotos/47836.jpg)

(http://www.keversite.nl/fotoalbum/fotos/47837.jpg)

even found more stuff

(http://www.keversite.nl/fotoalbum/fotos/47841.jpg)

Drove around, changed my mind, sold the stuff and bought some new. This was the result after 9 months:

(http://www.keversite.nl/fotoalbum/fotos/47828.jpg)

(http://www.keversite.nl/fotoalbum/fotos/47829.jpg)

Then I realised a 18 yo boy shouldn't be driving a origional looking car...
Got rid of the Whitewalls. dropped the front even more:

(http://www.keversite.nl/fotoalbum/fotos/56227.jpg)

(http://www.keversite.nl/fotoalbum/fotos/56229.jpg)

drove around for a while again..bought a different exhaust. new rear tires..

(http://www.keversite.nl/fotoalbum/fotos/60948.jpg)

and drove around like this until I broke my front axel

(http://lh3.ggpht.com/wesley.joosten/RzIGUgZe-nI/AAAAAAAAAw8/_877YEuyb-w/s720/Foto%27s-0006.jpg)

I decided I wanted a complete restauration. The car was showing some nasty rust. I started taking it apart on dec 22, 2007

Now, may 7th '09 i'm still working on it. Not making any money and beeing a student doesn't really help but i'm getting there.

here some (kinda random) picz from the progress ans plans:

(http://lh3.ggpht.com/wesley.joosten/R346gnCOmDI/AAAAAAAABFU/hlcubvwI4f8/s640/Foto%27s-0041.jpg)
(http://lh5.ggpht.com/wesley.joosten/R4yzynCOmYI/AAAAAAAABMg/ZamsvNB7K0k/s512/Pic-0020.jpg)
(http://lh5.ggpht.com/wesley.joosten/R4yzxnCOmVI/AAAAAAAABMI/bBPXhuIZejg/s512/Pic-0026.jpg)
(http://lh5.ggpht.com/wesley.joosten/R6tNj2h-LqI/AAAAAAAABUk/7orkcq46JTU/s640/Pic-0093.jpg)
(http://lh6.ggpht.com/wesley.joosten/R6tNjGh-LpI/AAAAAAAABUc/syQA0HttugQ/s640/Pic-0094.jpg)
(http://lh4.ggpht.com/wesley.joosten/R7NdboXKtLI/AAAAAAAABYQ/5DsWzVZ1TAI/s640/Pic-0095.jpg)
(http://lh6.ggpht.com/wesley.joosten/R5emqGh-LbI/AAAAAAAABQQ/w4a5AkG8Pso/s512/Pic-0037.jpg)
(http://lh6.ggpht.com/wesley.joosten/R0LyLQdmSHI/AAAAAAAAA6M/ZDZCXp3p58Y/s720/Foto%27s-0029.jpg)
(http://lh5.ggpht.com/wesley.joosten/R_6Knk00ntI/AAAAAAAABuQ/UHZcuVoYc4g/Pic-0205.jpg?imgmax=640)
(http://lh5.ggpht.com/wesley.joosten/SE7I-dYp0SI/AAAAAAAAB1s/qefdC-qyAGs/Pic-0436.jpg?imgmax=512)
(http://lh4.ggpht.com/wesley.joosten/SItD6BUM6pI/AAAAAAAAB5Q/UY-_hlTvfYg/Foto-0134.jpg?imgmax=576)
(http://lh6.ggpht.com/wesley.joosten/SItjZXch11I/AAAAAAAAB6Q/PnnYe7EfgT4/Foto-0137.jpg?imgmax=576)
(http://lh4.ggpht.com/wesley.joosten/SKQcBBJ_hXI/AAAAAAAAB7Y/ok8-J-Qt4Vs/DSC_0522.JPG?imgmax=720)
(http://www.keversite.nl/fotoalbum/fotos/74448.jpg)
(http://www.keversite.nl/fotoalbum/fotos/74605.jpg)
(http://lh4.ggpht.com/_YxCA7yNOduQ/SWjFyvYJe3I/AAAAAAAACsE/CFpPtWvo0uQ/s720/Foto-0046.jpg)
(http://lh5.ggpht.com/_YxCA7yNOduQ/SW0DKx9YBzI/AAAAAAAACvA/b57GFHlftwY/s800/_MG_3713.JPG)
(http://www.keversite.nl/fotoalbum/fotos/76347.jpg)
(http://www.keversite.nl/fotoalbum/fotos/79234.jpg)
(http://www.keversite.nl/fotoalbum/fotos/79228.jpg)
(http://www.keversite.nl/fotoalbum/fotos/79295.jpg)
(http://www.keversite.nl/fotoalbum/fotos/79301.jpg)
(http://www.keversite.nl/fotoalbum/fotos/79303.jpg)
(http://www.keversite.nl/fotoalbum/fotos/79294.jpg)

http://www.keversite.nl/videos/video.php?id=1568 (http://www.keversite.nl/videos/video.php?id=1568)
http://www.keversite.nl/videos/video.php?id=1567 (http://www.keversite.nl/videos/video.php?id=1567)

still got a little welding to be done, Sanding, painting and putting all the new rubbers and chrome back on which are laying around here.

The engine plans:

1200 single port
dual 28 carbs
1:1.1 rockers
Engle w100 or Scat c25 with straight cut
External oil filter and cooling
009 ignition
<5kg flywheel
38mm merged headers
Turbo Thomas muffler

(http://lh4.ggpht.com/wesley.joosten/R--xezM1viI/AAAAAAAABnw/hegrSTjlFSs/s640/Pic-0181.jpg)
(http://lh6.ggpht.com/wesley.joosten/R9JGVThu1wI/AAAAAAAABjE/jjIfxh4yh7Q/s512/Pic-0130.jpg)
(http://lh6.ggpht.com/_YxCA7yNOduQ/SgIfdxS4L6I/AAAAAAAACy0/QYZ6ODy-k84/cornelia77.jpg)


Got some friends helping and a great girlfriend with her own '67 project!

(http://www.keversite.nl/fotoalbum/fotos/78251.jpg)
(http://www.keversite.nl/fotoalbum/fotos/78244.jpg)
(http://www.keversite.nl/fotoalbum/fotos/78209.jpg)


So that's about it! Thanx for reading if you did.. Respect my work and I will respect yours.
Comments, tips 'nd tricks are welcome!
Feel free to ask more information. Puttin two years of work and ideas in a couple of picz is pretty hard...






 

Cool project dude but where did you get that COOL tacho from??? What make is it  ???

I spotted that to


TOOOO nice

I think it a VDO

It's custom one off a kind!  ;)

still looking for a 8cm Chrome ring

(http://lh6.ggpht.com/_YxCA7yNOduQ/SKQcAbqMalI/AAAAAAAAB7Q/hpP7r_OEgIE/s720/DSC_0521.JPG)

welcome dude! you're doing a great job there.
just make sure you fill the original 2 pea shooter holes and keep the one in the middle if you need it.

p.s. what kind of calipers are you using?

CB pref wide 5 kit with stainles steel tubings:

(http://www.keversite.nl/fotoalbum/fotos/77899.jpg)

(http://www.keversite.nl/fotoalbum/fotos/77898.jpg)

and i'm keeping the middel hole indeed!

new goodies arrived:

(http://www.keversite.nl/fotoalbum/fotos/79778.jpg)

Nice restoration project  :) The tach is nice.

some new stuff arrived:

(http://www.keversite.nl/fotoalbum/fotos/80078.jpg)

(http://www.keversite.nl/fotoalbum/fotos/79902.jpg)

all 60mm instead off 52
still looking for the oil temp version... anybody?

Nice work :)

(http://www.keversite.nl/fotoalbum/fotos/80123.jpg)

(http://www.keversite.nl/fotoalbum/fotos/80124.jpg)

(http://www.keversite.nl/fotoalbum/fotos/80216.jpg)

ready for welding... kinda scary to start cutting the lid...

Time for some little updates, found my gauge at budel! So now those are copmlete...

(http://www.keversite.nl/fotoalbum/fotos/80990.jpg)

Welding on the front fenders and lid is finished:

(http://img6.imageshack.us/img6/3773/img0753800x600.jpg)

all the small pieces are sanded allready and in the first coat off filler.

(http://www.keversite.nl/fotoalbum/fotos/80325.jpg)

(http://www.keversite.nl/fotoalbum/fotos/79300.jpg)

(http://www.keversite.nl/fotoalbum/fotos/79302.jpg)

(http://www.keversite.nl/fotoalbum/fotos/79301.jpg)

WOW long time no see  ;)

fresh paint and building up!

(http://www.keversite.nl/fotoalbum/fotos/85758.jpg)

(http://www.keversite.nl/fotoalbum/fotos/85765.jpg)

Looking good!
Not a big fan of the repro fuchs  :P

gr
Wout

I absolutely love the Simca's in red! Who's done the stitching? because I have four I'd like to redo.

Very NICE!  ;)

Cool Project ! (glad you found your Direction..)

Thanks for the avatar!

 :D

looks awesome!

Car looks OK. But we need more pics of the girlfriend.

+1 What he said.

Cute girlfriend.

(http://www.keversite.nl/fotoalbum/fotos/74695.jpg)

(http://www.keversite.nl/fotoalbum/fotos/74696.jpg)

(http://www.keversite.nl/fotoalbum/fotos/74697.jpg)

But she's mine!  ;D

Workin on some more details now and getting ready for the wiring

Is she turning her car into a 67?

The chassis is 67 but the body was far gone...so I got a new one and made the quick conversion

 ;D

(http://www.keversite.nl/fotoalbum/fotos/86215.jpg)

(http://www.keversite.nl/fotoalbum/fotos/86216.jpg)