The Cal-look Lounge

The Cal-look classifieds => For sale! => Topic started by: Jyrki on May 31, 2009, 13:09:33 pm



Title: 62mm carbs, 58mm throttle bodies, harness etc.
Post by: Jyrki on May 31, 2009, 13:09:33 pm
Stuff for sale:

Geers 62mm Terminator II carburettors, two set of stacks (tall and short), 52mm venturies, new adapter plates between the carbs and manifolds. I bought these 2 years ago from Shawn Geers, and they used to be in his personal Pro Stock car!!! Asking 1799eur / offer

Spindle-mount Erco front wheels + bearrings for K&L spindles, with well used 22" front runners (the front tires are old and not too good anymore). 199eur. SOLD

Jyrki
jyrki.laune(at)gsg.fi


Title: Re: 62mm carbs, Wilwood brakes (+ Erco wheels and slicks)
Post by: bang on May 31, 2009, 16:32:29 pm
can you post me some pictures of the brakes and wheels at
peterbang.hm@gmail.com


Title: Re: 62mm carbs, Wilwood brakes, 8" Erco wheels, spindle mount fronts
Post by: Jyrki on July 06, 2009, 15:26:31 pm
Updated...
Jyrki


Title: Re: 62mm carbs, Wilwood brakes, spindle mount front wheels
Post by: Jyrki on July 23, 2009, 09:15:36 am
Also for sale:

Sabelt 6-point 3" harness, red, valid end of 2010. 99eur. SOLD
http://shop.autoracing.fi/index.php?main_page=product_info&products_id=567&zenid=j9ah04ltqagtefmaao63u3apv5

Two Audi S2 (RS2) wastegates in excellent condition. 99eur each.   BOTH ARE SOLD

Delivery to SCC available.


Title: Re: 62mm carbs, Wilwood brakes, spindle mount front wheels, harness, wastegates
Post by: Jyrki on August 04, 2009, 18:40:07 pm
Some more stuff:

MSD billet distributor, driven less than 200km since new. 149eur   --- SOLD

TWM 58mm throttle bodies (IDA-pattern), with velocity stacks, fuel rails, TPS. Less than 200km since new. 1399eur, and 1599eur with almost new 760cc injectors.

CB Quick Tune EFI, incl. ECU, harness, sensors (PLX wideband, MAP, CHT, fuel pressure). No throttle bodies, no injectors, no fuel pump. Asking 549eur   --- SOLD

And, as previsously, delivery to SCC available.

Jyrki


Title: Re: 62mm carbs, spindle mount front wheels, S2 wastegates, seat belt etc
Post by: Jyrki on August 08, 2009, 13:33:23 pm
Another item I don't need anymore: 31.2mm torsion bars (551mm length). These were in my heavy '65 turbo car before it was converted to ladder bars and coil-overs. Custom made in Finland with high-quality spring steel and heat treatment. 199 euros --- SOLD 
Jyrki


Title: Re: 58mm throttle bodies, 62mm carbs, spindle mount wheels, wastegates etc
Post by: sonic on August 11, 2009, 20:02:27 pm
Hi Jyrki
If not sold , do you have a possibility to bring the TWM , tb to SCC .
Reg
Erich


Title: Re: 58mm throttle bodies, 62mm carbs, spindle mount wheels, wastegates etc
Post by: Jyrki on August 12, 2009, 08:36:29 am
Hi,
I still have the throttle bodies. I'll take them with me so that you can take a look.
Jyrki


Hi Jyrki
If not sold , do you have a possibility to bring the TWM , tb to SCC .
Reg
Erich


Title: Re: 58mm throttle bodies, 62mm carbs, spindle mount wheels, wastegates etc
Post by: Jyrki on August 12, 2009, 17:33:19 pm
Last chance!!! If someone's interested in the stuff above, and wants a delivery to SCC, please contact me by noon thursday.
Jyrki


Title: Re: 58mm throttle bodies, 62mm carbs, spindle mount wheels, wastegates etc
Post by: Jyrki on August 19, 2009, 19:15:46 pm
New lower prices...
Jyrki