|
Title: Help me !!! Post by: turtle racer on June 16, 2009, 13:55:10 pm I have a problem of driving regulation, I do not manage to make take the maximum of tours minutes has my engine 1776 cc.
I have 48 IDA gone up on short pipes with the following regulations 175 in gasoline and 200 in air. My buzzards are in 40. The use of the engine strip only. Thank you for your help. Title: Re: Help me !!! Post by: roland on June 17, 2009, 10:42:49 am I think you should write that in French, then one of us will translate it in English.. right now it's a little hard to get what you mean...
Title: Re: Help me !!! Post by: turtle racer on June 17, 2009, 11:11:53 am Merci Roland, j'utilise un traducteur sur le nett donc bien galére parfois.
J'ai en faite un problème de réglage moteur. Je n'arrive pas à trouver le régime max de mon 1776. Je voudrais savoir quel type de gicleurs de doit mettre dans mes 48 IDA. Actuellement j'ai des buses en 40; des gicleurs d'air en 200 et en essence 175. L'utilisation sera que pour la piste. Title: Re: Help me !!! Post by: Neil Davies on June 17, 2009, 12:37:31 pm Roland will see if my translation is ok, but basically are you wondering if the jets you have are ok for maximum performance?
1776cc drag race motor, 48IDAs on short manifolds, 40mm Venturies, 175 fuel jets, 200 air jets. Jim Ratto will probably be able to help! Other useful information would be cam, rockers compression ratio, heads and valve sizes, rpm. I can't help any more than that! Title: Re: Help me !!! Post by: roland on June 17, 2009, 13:51:37 pm Je n'arrive pas à trouver le régime max de mon 1776. Qu'est ce que tu veux dire par la, trouver le régime max? ton moteur ne monte pas dans les tours? Other than that Neil you're right, sorry for the french aparté people :) Title: Re: Help me !!! Post by: turtle racer on June 17, 2009, 17:56:14 pm Oui c cela Roland, il ne monte pas dans les tours.
Neil, you all understood. Title: Re: Help me !!! Post by: Christofe on June 17, 2009, 20:57:34 pm et quel arbre a cames ?
msd / rupteur ? pompe a essence ? quel type ? regulateur de pression ? Bien à toi Christofe Title: Re: Help me !!! Post by: roland on June 17, 2009, 23:22:46 pm So the problem is that the engine won't go to high rpms... with more info, should be easier to figure out ;)
Title: Re: Help me !!! Post by: turtle racer on June 18, 2009, 08:39:04 am Arbre a came FK 45
MSD complet avec boitier 6AL pompe a essence Holley bleu avec régulateur a 4psi Title: Re: Help me !!! Post by: Frank LUX on June 18, 2009, 09:10:13 am Tree has cams FK 45 MSD complete with boitier 6AL Gas pump HOLLEY Blue regulating in 4psi I think would better write in French, or learn English or get a better Online Translater.... Sorry Turtel but most the stuff you "wrote" does not make sense.... ::) Frank Title: Re: Help me !!! Post by: Frank LUX on June 18, 2009, 09:11:06 am Tree has cams FK 45 MSD complete with boitier 6AL Gas pump HOLLEY Blue regulating in 4psi Title: Re: Help me !!! Post by: Frank LUX on June 18, 2009, 09:12:18 am Tree has cams FK 45 MSD complete with boitier 6AL Gas pump HOLLEY Blue regulating in 4psi I think it would easier for you to write in French, or learn English or get a better Online Translater.... Sorry Turtel but most the stuff you "wrote" does not make sense.... ::) Frank Title: Re: Help me !!! Post by: Neil Davies on June 18, 2009, 09:20:02 am Tree has cams FK 45 MSD complete with boitier 6AL Gas pump HOLLEY Blue regulating in 4psi I think would better write in French, or learn English or get a better Online Translater.... Sorry Turtel but most the stuff you "wrote" does not make sense.... ::) Frank We'll get there! It's funny that looking at some of the first postings on here how much better some of the regular posters english has got over the last couple of years! :D Whou would have thought that you can learn English through a Norwegian forum about a German car... :) Title: Re: Help me !!! Post by: turtle racer on June 18, 2009, 18:02:49 pm Sorry Frank like lot of people !!! ;D My translater online is not good. ??? Title: Re: Help me !!! Post by: Fasterbrit on June 18, 2009, 23:54:20 pm I blame the 40 buzzards. Pesky creatures at the best of times ;D
Title: Re: Help me !!! Post by: pughdog on June 19, 2009, 07:42:57 am ;D
|