|
Title: 2332 Clutch disc? Post by: eh on July 16, 2009, 10:20:29 am My 66 weight is about 2100 lbs and I’ve some question.
CB Aluminum Case CB Super Race crank 84mm. Chevy journals 94mm. Cima Mahle piston with Jaycee 94mm.long cylinder 5.7 inch Scat H-beam rod Engle FK 10 ,Autocraft 1.4:1 Roller Rocker Arm Straight cut cam gears 8.5 to 9:1 compression ratio CB 044 Wedge port cylinder head 44*37.5 mm. 48 IDAs Skat Trak Manifold 1 ¾” Merged Header 12.5 lbs Lightweight Forged Chromoly Flywheel Kennedy 2600 lbs Pressure Plate Rhino case 3.88 r&p with solid mount 3.10/2.06/1.58/1.21 Aluminum side cover Sway Away Racing axle Which clutch disc to fit with my combo? Centerforce dual friction, 4 pucks or solid center clutch disc use for weekend drive only,sometime in the drag strip Thanks for every comments. Eh. :) Title: Re: 2332 Clutch disc? Post by: Udo on July 16, 2009, 11:51:50 am Kennedy stage 2 and daiken disc . Stage 3 and 4 puck is a gearbox killer ..
Udo Title: Re: 2332 Clutch disc? Post by: Neil Davies on July 16, 2009, 13:11:33 pm I used a 4 puck and a stage 2 in a 1640lb car and it wasn't a clutch pedal, it was an on/off switch. I wouldn't use one in a street car.
Title: Re: 2332 Clutch disc? Post by: Jonny Grigg on July 16, 2009, 22:33:41 pm stage 1 and black magic.
Title: Re: 2332 Clutch disc? Post by: John Rayburn on July 16, 2009, 23:20:06 pm Stage two and a Daiken.
Title: Re: 2332 Clutch disc? Post by: Jim Ratto on July 17, 2009, 00:52:31 am Stage two and a Daiken. same here. Same p/p and same disc since 1998 Title: Re: 2332 Clutch disc? Post by: Paul Bate on July 17, 2009, 15:35:16 pm Kennedy stage 2 and daiken disc . Stage 3 and 4 puck is a gearbox killer .. Udo I agree with Udo! that would be my choice. Paul Title: Re: 2332 Clutch disc? Post by: JIMP on July 17, 2009, 16:06:40 pm I'm also with Udo, stage 2 and Daiken
Friendly Dimitrios Title: Re: 2332 Clutch disc? Post by: eh on July 17, 2009, 17:25:25 pm Thanks for all answer. ;D
Can I use daikin disc with stage 3 cause Ihave it already, or I could change the pressure plate to stage 2. How about centerforce dual friction use with stage 3 ? Eh. Title: Re: 2332 Clutch disc? Post by: Peter on July 17, 2009, 17:35:23 pm i dont think you will need the dual friction,
and i would step down to a stage 2, thats what i use in my 2276 noo slipping! Title: Re: 2332 Clutch disc? Post by: JS on July 17, 2009, 23:19:26 pm Stage 1 and dual friction. Works fine. 2276.
Title: Re: 2332 Clutch disc? Post by: BeetleBug on July 18, 2009, 15:42:13 pm I would not use a black magic in a gearbox with syncros unless you plan on changing them every winter. That said, the thin black magic is lighter and might be better. Best rgs BB stage 1 and black magic. Title: Re: 2332 Clutch disc? Post by: eh on July 22, 2009, 07:08:01 am Thanks, everyone.. ;D
Eh Title: Re: 2332 Clutch disc? Post by: gizago on July 22, 2009, 09:31:13 am Has anyone used the ACE copperhead disc??
|