|
Title: Fitting Hurst Line Loc Post by: Paul Bahnstormerz on August 13, 2009, 22:50:26 pm Hi,
What extras do I need to get sorted to fit a Hurst Line Loc? What thread is the line lock, so I can get some a new hardline made up, etc. thanks, Paul Title: Re: Fitting Hurst Line Loc Post by: Hotrodvw on August 14, 2009, 00:28:22 am Most likely it is 1/8" female npt in/out. If you're making new hard lines, converting to sae parts is easier than adapting back and forth to metric. I run -3 AN adapters to my 3/16" SS hardline.......only adapting at the wheels and m/c. This saves a lot of head ache in the long run IMO.
(http://i8.photobucket.com/albums/a6/Hotrodvw/IMG_1476.jpg) Title: Re: Fitting Hurst Line Loc Post by: Russell on August 14, 2009, 06:43:47 am you can get the correct line loc to metric adapters from gunter at CSP.
Title: Re: Fitting Hurst Line Loc Post by: Lids on August 14, 2009, 08:33:56 am or ben at SSP,
or you could snip the ends off the brake lines and fit American ends. Title: Re: Fitting Hurst Line Loc Post by: SteveW on August 14, 2009, 08:36:58 am Another place is Speedflow, Fay is really helpful and knows her stuff, all my brakeline hose and fittings were bought there. www.speedflowshop.co.uk (http://www.speedflowshop.co.uk)
Title: Re: Fitting Hurst Line Loc Post by: Paul Bahnstormerz on August 14, 2009, 10:50:14 am Thanks, found a local american car shop, so I'm going to have new hardlines made up and with metric and american fittings as required, Then it's more bleeding out brakes >:(
|