The Cal-look Lounge

I decided to share my project and as this is my first race car project and I'm sure I need all the info and comments from you guys. This will be a long project as I'm building most of the things myself and I still don't know all the specs of the fin(n)ished product. I try to update this thread from time to time, at least when there is something to update.

The project started a year ago as I wanted to change my current street car's cage to 8.5 second leagal 8pt cage. So I bought RLR 8pt chromemoly cage which Jyrki had imported few years ago and no one has used. After a while I bought more tubes in order to build a full tube chassic as I figered that would be the easiest way after all. I also bought RLR back half for the car. I already had another fairly good 1952 split window waiting for better times so I decided to use that and not cut the UB-52. I also sourced a salvageable set of original fenders so the body and all that is in order. I just need to get the chassis on wheels before getting into that.

(http://farm4.staticflickr.com/3779/11009333074_840a0ee182_o.jpg)

(http://farm6.staticflickr.com/5479/11009332254_4a04822f7b_o.jpg)

(http://farm4.staticflickr.com/3725/11009378123_0e9491965d_o.jpg)

We started from floor up and each tube was bent by various race car builders based on our cardboard or plywood models. As the chassis was 250km's form my home it took us at least 7 or 8 monts to get to this point and some frustrating moments when I could only fit one or two tubes during whole weekend. I wanted to save all the original sheet metal under the bonnet so the front end is a bit different from normal chassis. I'm sure it works like this  as well. We ended up using only four prebent tubes form RLR sets, for example main loop and whole back half were bent locally to better follow the body lines inside the car. So thinking backwards it would have been better just to buy quality bender and whole lot of tubes.

(http://farm6.staticflickr.com/5543/11009252296_86c32c6be0_o.jpg)

(http://farm8.staticflickr.com/7414/11009376743_302f9069e8_o.jpg)

(http://farm3.staticflickr.com/2863/11009375973_09001325f7_o.jpg)

About a month ago the chassis was taken to local "chassis shop" be welded and get the rest of the tubes fitted. It only took them 40 hrs and the chassis was done. Welds are very nice and tube fitting just perfect. I couldn't have been happier with them.

(http://farm4.staticflickr.com/3823/11009249446_ca1bf9133c_o.jpg)

(http://farm4.staticflickr.com/3692/11009248606_de2c292894_o.jpg)

So now the chassis is like this. The floor meets new(?) sfi25.4 specs and if I add funny car cage this could get tagged to 7.5 seconds. I will not add the extra cage at least not at this stage. The weight is 64,5 kg's but I still have to add a few tubes and tabs for the body and components. Even if it matters very little I hope it stays under 70kg's.

(http://farm6.staticflickr.com/5505/11009373543_ec3e7b151e_o.jpg)

(http://farm4.staticflickr.com/3669/11009148115_37a5518ff5_o.jpg)

Basically this is where the project just begins for me as I'm getting the chassis to my own garage. I have no schedule for this but I hope it will not take too many years. The plan is to get the car on wheels during this winter and then fit and weld the body.
 
I have no idea what kind of engine I will use. I will most probably use 091 transmission and irs setup at rear but I can think those things later when everything else is in order.

Looks a great project best of luck. Alex

Looks cool :)

Looks great as does the Cossie sat in the back ground...I do have a soft spot for Cossies

Believe me, this is one of the nicest projects & concepts in VW scene ever!!!
Jyrki

Very cool Project! Please keep on posting pictures...

Very nice build. I think for 7.50 you need some more bars under the feet and sides so the tires can't get in the car.

Yes, I will add crossbars to the floor as well as diagonal bars to the sides. I need the pedals first so I can use the same bars to support them. Also rear end will get some more supporting bars.The plan is to keep everything as simple as possible in order to finish this at all. The only more complex thing is rear suspension but I hope it is so well designed I won't get into troubles with it.
(http://farm6.staticflickr.com/5522/11062362425_c75aab2f72_o.jpg)

Interesting rear end, it looks a little like Keith Seume's No Mercy suspension with a 4 bar IRS. Cool car!

Very nice car and exiting project - keep us posted!
:)
Johan

Thank you for posting this project thread Tomi!

So... I guess this one will be a turbo car?

-BB-

Turbo is not at all out of the question. But first I have to finish the chassis and body. And if still at that point my street car engine is in one piece I will be tempted to dial in the car with that. If the new car is lets say 200kg's lighter it will be possible to run high 9's, but like Jyrki said, it will be boring as hell.

Haha, I agree with Jyrki  ;D

Awesome!

Looking forward to follow the progress!

Yes very nice project  ;)

Yap, a properly set up heavy chassis car, or even a pan car with ladder bars, runs 9s without any drama = boring as hell. For adrenaline rush you need some boost!
Jyrki

Very nice Projekt  :) :) i love these fast old racecars  8)

No progress at all but some new ideas I would like to try and get opinions of. I wanted to maximize shock movement as the wheel only travels about 40mm upwards so I wanted to see if cantilevers would do the trick. With 1.5:1 rocker ratio I get 60mm and more precise control. Ride height will be adjusted with the link bar and not spring height so the rate remains constant. This is getting a bit away of the simple theme but if it works I don't mind. What do you think, should I give this a try or does anyone see some design flaws?
(http://4.bp.blogspot.com/-t6xOf4prGXA/UrAA7dwD0YI/AAAAAAAABPk/p4miH-WoE4k/s1600/Takajousitus+4-linkki+ty%C3%B6nt%C3%B6tanko+8.jpg)

Dang..

I was rendering a push rod rear suspension with my uncle last night.
It was not that sweet :)

You could get more travel if you traverse the pushrod and coilover to the other side. One over the other.

Or check out this Mustsng: http://m.youtube.com/watch?feature=plpp&list=PL933202463D47A1C2&v=42GTMDhLG2Y

Running the shocks across was the initial idea but in that case only 14" shock could have been used due to limited space between the back end tubes. Having them longitudinally there is basically no limitation for shock length. The rocker ratio here is 1:1.5 and range of movement is just about perfect with 17" shock which I will be using. For swing axle car it would probably be better to use 1:2 ratio as the pushrod movement is far less than with IRS. So swing axle cars would benefit this kind of suspension even more than IRS cars.

I can't use any cad programs so I'm just giving my ideas to ones who really can. I also get the needed parts with the same effort. I'm slowly beginning to think that this is getting a bit too complicated but I just want to try something different than the usual swing axle with ladder bars. I know this is not making the car any faster but I like the idea of no camber or any other alignment changes.

you should talk to Peter Shattock to see how he did the suspension setup. it doesn't have this shock setup, but what i saw on his car (pictures of it) looks really good.

Yes, I have seen some pictures of Peter's suspension and it looks great. I was thinking about having similar made while I was still going to build a pan car. But with a tube chassis I had the possibility to use four links which I hope to add stability at launches. I also like the Mopar wheel bearing hubs, similar to Empi, etc. which allows me to use longer drive shafts for better CV joint angle. My transmission will be moved forward at least 90mm so with short shafts the angle would be quite big.

(http://2.bp.blogspot.com/-sPLUlsVjnzE/Ur8vcxQrzXI/AAAAAAAABQE/zUu10UC3UxI/s1600/IMG_1014.jpg)

There are more photos of Peter's build on the Andy Robinson Race Cars site, but check this advert on the samba http://www.thesamba.com/vw/classifieds/detail.php?id=1570472 it has a ladder bar with IRS set up.

The Red Baron has a rear suspension that seems to work...
Swing axel with push rod suspension?

Tomi, have you done a 3D simulation of the movements in this suspension setup? From what I see, it looks like the link bars going from the hubs to the coilover rocker have to much angle to give the rockers the necessary movement. As the hubs are going straight up and down, I think most of the movements will bee in the uni-balls, and not creating any force to the springs. Just my thoughts.   

Yes, this has been simulated and also some stress testing made. Without simulation I doubt this could even have been possible as all the mounting points do have effect on the alignment changes etc. In this picture the suspension is at it's highest and lowest point and no change in toe in or camber and as you can see the shock is fully compressed. Suspension idea itself is copied from Alan Fore's car with the exception of four links and shock placement. When I asked from the manufacturer with the intention of buying the setup I got no clear answer on anything except the price. I still would have had to do the simulation to find the mounting tab positions so I decided to spend my money locally. And I'm really glad I did.

(http://i1077.photobucket.com/albums/w477/tide75/suspension_movement_zpscd7d7481.jpg)
This is an early model with 14" shock and 1:1 rocker ratio but it shows the pushrod and rocker movement.

I finally got all the needed parts for rear suspension and some of them are now tacked into place. I also added some more tubes to the floor and backhalf.

(http://farm8.staticflickr.com/7425/12817534975_344771264f_b.jpg)

I will add a bracket on top of the rocker as well as I don't want it to twist the tubes.

(http://farm6.staticflickr.com/5485/12817951164_4b5419aa15_b.jpg)

This transmission is just for mock up and I'm having hard time figuring how to mount upper arm as starter motor and drive shaft is in the way. Easiest fix would be Mendeola, but I would still like to use 091 as I already have it and also plates for it.

(http://farm8.staticflickr.com/7410/12817613783_827e4619a6_b.jpg)

Hi there,
Great project. Have you built the floor section to sfi spec? If so do you have any more pics and tubing specs to share please. Need to update my lummus chassis.
Thanks
Lee

Yes, the floor should be sfi 25.4 spec. I don't have the spec book with me right now but will try to find it.

Hi Tomi,

I'm interested in your Stress test simulation, what amount of force did you apply and what safety factor did you reach on the construction?
Have you also tried a 'Dynamic' test on the construction?

Sorry, I do not have the details of the stress testing as I did not, and can not, do it myself. I have just given the numbers to the designer and trust him completely. Tests were made on the rear suspension components only, not for the chassis. To me everything seems overbuild at least when compared to other similar systems.

Okay thanks Tomi,

I was hoping for some numbers, just out of (engineering) interest :)

Keep on doing awesome things!

cheers.

Nice project ;)

OK, as I told you at the begining this will take some time to get finished. But I finally made some progress with the car after a long summer doing nothing VW related. Funny car cage is was installed just in case even if I don't expect to run below 8.5. Also all other tubes were welded as well as seat, seat belt and pedal box tabs. I will get the frame inspected in the following few weeks to be sure it meets the specs.

(https://farm4.staticflickr.com/3885/15308040711_b82fb01014_o.jpg)

Everything looked good at this point but then we mounted the body on the frame and set it at the ride height. Front wheel is 20mm away from the fender and that will not be enough travel. I will use 22" tire to have more space and hope it's enough. Rear wheel here is 17" but it was the closest to 26" tall tire we had at hand. Looks like 26" might just clear but I was going to use 27.4" tall tire so I will have to raise rear fender as well if I want to keep this stance. And I really like how it sits so I will just cut and weld until it fits.

(https://farm6.staticflickr.com/5562/15311209255_101218849b_o.jpg)

The biggest problem now is the angle of suspension arms, they point upwards at the ride height. Also the pushrod will be at such angle it will not work. So I will have to get new mounting tabs to be made again and fix these issues. Engine is 150mm from the ground and I think that's enough clearance. It is also moved approx 90mm towards the front to get better weight distribution.

(https://farm4.staticflickr.com/3915/15124620858_d567edb2db_o.jpg)

I will also have to add tabs for 4-links as they also point to wrong direction. But other than these minor setbacks everything is starting to look like this will work OK.

(https://farm4.staticflickr.com/3865/15288155886_a38c806e75_o.jpg)

Under the hood everything seems to be fine at least. I will try to keep it original and only modify the shelf to clear the front beam.

(https://farm4.staticflickr.com/3865/15308043211_bc580d322c_o.jpg)

That's it for now. I still hope to get the chassis on wheels during this year. It's not too far anyway.

nice work ;)

A little update again, as the car is getting some work done to. Rear suspension changed a bit, now the geometry is correct. The chassis was also inspected and now meets sfi 25.4 specs. I needed to add a few tubes but otherwise it was fine as it was.

(https://farm9.staticflickr.com/8562/16015586720_91919fbb8e_b.jpg)

](https://farm9.staticflickr.com/8587/15531818054_7b4f30f47d_b.jpg)

The body is now being repaired by a friend of mine. He will also modify the rear fenders to fit as the wheel arch was raised approximately 60mm. Body was not in so good condition as it first looked but soon it will be just perfect.

I have no hurry of getting the car back to my own garage but when that happens I will start to assemble it. The idea is to assemble the car without painting the body or anything and get it driveable, then disasseble it and paint everything.

](https://farm8.staticflickr.com/7509/16017159837_707379cebf_b.jpg)[/

(https://farm8.staticflickr.com/7530/16202087282_63a5699af1_b.jpg)

Looks great ;D
I am trying to find info on making my lummus chassis up to sfi spec you mention.
Could you show me a pic of the floor section and what size the tubing is (diameter and wall thickness)

Thanks
Lee

Here's one picture where the floor is visible.

(https://farm9.staticflickr.com/8683/16203793891_d57c719ed7_o.jpg)

The lognitudal tubes are 1 1/2 x .065, the X is 1 x .049 and seat support tube is 1 1/4 x .058. But it all depends on where your helmet is located in relation to main hoop. Mine is all forward from main hoop. I suppose it is better to get the rule book to get it right.

Thank you for that. 2 more questions if I can?!!
How does the floor change if you sit behind?
Also are the rear tubes where the gearbox sits in a smaller diameter than the 1 1/2 inch longitudal tubes you mention?
Lee

Floor changes below the drivers seat. There are three variants depending on the helmet position, or actually two if you do not have funny car cage.

I suppose if you have RLR cromo chassic, the back end tubes are 1 1/2". Mine are at least. PM me your email address and I'll send you more info on the floor tubing.

My chassis is not near me, but 1 1/2 sounds right. The outer tubes on the floor section are bigger though.

Thank you for your help. Sorry for hijacking your thread. Will pm you my email.
Lee

Very nice work Tomi

I finally got the car back from bodywork. Welding is at least 85% done and body is mounted on the chassis. There was a lot to do as the body was quite rotten but thanks to fellow Slug, Mika, everything is now OK. We raised the rear fenders approx 60mm and the fenders were modified to fit. Rear apron is not modified as I don't like to look when it gets raised. Now I need to make some room at the garage and lift the body off so I can start building this again.

(https://farm9.staticflickr.com/8729/16510816034_67f7aa0f02_o.jpg)

(https://farm9.staticflickr.com/8765/17133242915_e85bfe6309_o.jpg)

(https://farm8.staticflickr.com/7631/16945706800_fb9f6e1ca2_o.jpg)

(https://farm8.staticflickr.com/7587/16947064189_ccf8506d20_o.jpg)

(https://farm8.staticflickr.com/7676/17131681382_51dd210318_o.jpg)

Very very nice!!

Any progress on this? ;D

Fckn awesome ! That look´s very cool !

Regards Ben

There's been no progress at all due to shotage of time. But I'm sure that will change soon and there will be a lot of progress over the winter as I still haven't lost all my motivation.

Hi Tomi,
Glad you still have your motivation. I need I finalise my order for the sfi tubing update but am stick on one tube size required, can you help?

The tube on the floor section that goes from left a pillar to right a pillar, what size should that be?
Lee

The tube I mean is the one on the bottom pic, across the bottom of that picture

That would be 1 5/8 x 0.083.

Thought so, my chassis has a 1 1/2" fitted at moment
Thanks,
Lee

Time for a little update I suppose. Summer went and I did nothing with this one and also had some difficulties starting working again. I assembled the rear suspension and it seems to work just fine. Then I took it apart and sent some of the parts to be modified. I also begin working on the body and cut the front end off. I was so busy doing all this I didn't take much pictures but here's some.

(http://4.bp.blogspot.com/-3ULpSbVkNYg/VjexbC_yoVI/AAAAAAAABnE/qjjBh7psq8U/s1600/project.jpg)

Then I got a 40's repair panel from Virtanen Restoration Panels and it was just perfect. So the front end is going back together.

(http://2.bp.blogspot.com/-7iRSblZdGKU/VjexbS2E8jI/AAAAAAAABnI/EhGJVNIpVNU/s1600/IMG_2518.jpg)

I also bought a used engine in pieces, just needs a big turbo and some smaller bits. Now I'm beginning to realize my transmission will need to be changed or gear ratios altered as it is geared for a lot smaller high revving engine. But I'm not worrying that right now, my main target is to get the body done before christmas.

(http://1.bp.blogspot.com/-J9bzAY8ghSo/Vjexbeh9e8I/AAAAAAAABnM/dasbpmOQmbc/s1600/IMG_2496.jpg)

Motor parts look nice  ;D
Good to see you are back on it

Looks a lovely project, love seeing the level of detail involved

Some news? ;)

Well, not much. I've been collecting parts like brakes and such and got the body ready to be painted. As soon as get it delivered to paint shop I need to start working on the chassis.

(http://1.bp.blogspot.com/-a4EjGMEPzqU/VmaW3MI_4MI/AAAAAAAABn0/q_ph-Ojj90o/s1600/IMG_2603.JPG.jpg)

Looks better than my project :D

Like it 8) 8)

Very nice :)

At sure a great source of inspiration !

Any progress?

Not much but things are slowly going forward. I sold the 091 as Jyrki's been breaking the same gears as it had and got sequential Mendeola instead. That should be a lot stronger. Body is in primer waiting for paint and chassis is getting the panels done. And I have been assembling brakes and such so when chassis comes back I will start putting everything together.

(https://c1.staticflickr.com/6/5740/30159856792_ac59cf9a60_o.jpg)

(https://c1.staticflickr.com/9/8555/30159857072_8a04ddc546_o.jpg)

(https://c5.staticflickr.com/9/8129/30159856892_d909e6420e_o.jpg)

(https://c7.staticflickr.com/6/5535/29644815614_33d6bf597b_o.jpg)


 

Nice update :)

Impressive😎

Ahhh I know this gearbox! Good choice!!

Cheers,
Basti

Any updates?

Not really. I've been mostly been working on my street car with my somehow limited free time.

Small update for this project (with permission of Tomi).

Chassis have moved to my work shop for a while ago. I will continue to build this drag car.

Some changes will be done, like strange front coil overs and brakes. Body will also be something else than in Tomi’s pictures. At this moment, I’m collecting parts. I do have a lot, but a lot of needs to buy. Progress will be slow as my own work will be a big part of project.

Anyway, a couple of key words of project are: Pauter, turbo, Mendeola S5.


[attachment=1]
[attachment=2]

Some news about this perfect project?
Thanks!
Franck

Hi!

No progress because of other projects. Green super needs to be finished first. I need that lifter for race car.
Only FuelTech FT600 have been bought.

[attachment=1]

Chassis is now on lifter. Test fitting some parts.

[attachment=1]

Good News!

Outstanding Tomi ...

Thanks.. But Tomi has sold this chassis for me for a while ago. See update at April -19 above.

Awesome.
Cant wait to see this progress!!  ;D

So.. What about this beautifull project since 2 years?
please! please! ;)

Just planning have been made. Some modifications to cage will have to do.. Delays…  :(