|
Title: 4" Bore Aluminium case by Jeff Denham / Shawn Geers. Post by: UltraOrange67-2443 on August 15, 2017, 09:38:16 am New aluminium case.
Flange seal cut and sand seal front. Cleared for 90mm stroke. BMW Bearing mod (bearings fitted) for use with all T4 main. 6 stud, 4 x 10mm 2 x 8mm per Cylinder (case savers fitted deep!) Bronze thrust conversion (you will need shims to suit your crank) all mains shuffle pinned. To#¤ta thrust can be fitted to suit your crank for extra cost. Lots spent. £1000 or swap for Italian 48 IDA's. Cheers, Nick https://www.thesamba.com/vw/classifieds/detail.php?id=2085051& Pics ^^^^ Title: Re: 4" Bore Aluminium case by Jeff Denham / Shawn Geers. Post by: leec on August 15, 2017, 22:42:16 pm What's the reason for selling? What barrels is it bored for?
Lee Title: Re: 4" Bore Aluminium case by Jeff Denham / Shawn Geers. Post by: dannyboy on August 15, 2017, 22:52:23 pm 4"?
Title: Re: 4" Bore Aluminium case by Jeff Denham / Shawn Geers. Post by: leec on August 15, 2017, 23:02:27 pm 4"? I know that, but different barrels measure outside different. Mahle and AA may be slightly different for example Title: Re: 4" Bore Aluminium case by Jeff Denham / Shawn Geers. Post by: UltraOrange67-2443 on August 15, 2017, 23:37:32 pm What's the reason for selling? What barrels is it bored for? Lee I have had both AA and Pauter machined to fit. It is best to machine your Cylinders to fit the case. I can get you Dia measurement on Thursday. Change of plan ;) Title: Re: 4" Bore Aluminium case by Jeff Denham / Shawn Geers. Post by: UltraOrange67-2443 on August 21, 2017, 21:21:46 pm Lots of interest in the 4" bore case and Strip dom Heads!
|