|
Title: 2165 type1 long block Post by: bang on April 17, 2020, 07:00:13 am [attachment=1][attachment=1][attachment=1][attachment=2]hey. longblock 2165cc. all new parts. only case is used.
will be assambled within the next 2 weeks. build for 145-150hp and for highway cruise. new dpr crank with flywheels and clutch. all ballanced new cp performance pancitos heads with idf manifolds as41 case comes from a industrial plant with -10 hours of run new aa cylinder and pistons magnum cam gear csp studs 8mm alu pushrod tubes jpm pushrods all case hardware in black h beam rods etc. i will take some pictures this weekend. 5000 euro Title: Re: 2165 type engine parts. Post by: bang on June 02, 2020, 21:29:13 pm Can spilt if anyone can use some of it.
CB Pantitos heads with match port manifold. 850 euro dpr crank new with match ballanced flywheel, and stage 1 pressure plate. 1450 ready to drop in have a look on the pictures and see if there is something you need. also have a lot of other engine parts plus some boxes of LAT Racing oil Title: Re: 2165 type engine parts. Post by: bang on June 02, 2020, 21:31:06 pm more pictures
Title: Re: 2165 type1 long block Post by: bang on September 23, 2020, 08:07:40 am now as a longblock.
Title: Re: 2165 type1 long block Post by: alex d on September 23, 2020, 08:50:25 am What are the rest of the specs? Camshaft, compression ratio? Where is it located?
Title: Re: 2165 type1 long block Post by: bang on September 23, 2020, 11:15:18 am hey alex.
cam is a web#163 cb lifters sedek 26mm oli pump case is full flow and done with "Hover mods" magnum cam gear jay cee pushrod tubes jaycee oil pump cover with returns. match port idf manifolds stage 1 kennedy pressure plate with delkin disc deck hight is 1,17mm cc in heads is 61cc so comt is set to round 9:1 the engine is located in denmark. i want to build an engine to run in the swedish 1600 challange that is why i sell this. was ment for my bus, but i sold it and how this has to go. Title: Re: 2165 type1 long block Post by: bang on November 14, 2020, 19:50:55 pm taking offer.....
|