|
Title: Mark Pascoe’s 1776cc Ti Valve wanted Post by: Paul Bate on May 23, 2020, 08:42:16 am I’m currently re-building Mark Pascoe’s Drag Oval 1776cc Engine.
It has a bent Titanium valve which we think was a Bugpack, they no longer stock them. Has anyone got one or know where I could get one, the spec is: 37.5mm Diameter 8mm Valve Stem 113.3mm Long It has a flat bottom as per the photo Thanks for any help Paul[attachment=1] Title: Re: Mark Pascoe’s 1776cc Ti Valve wanted Post by: leec on May 23, 2020, 09:39:53 am Hi Paul,
Sure you have used google, but after a quick search are these any good? https://vwparts.aircooled.net/Titanium-Racing-Valve-Type-1-Based-Engines-Each-p/4059t1.htm Lee Title: Re: Mark Pascoe’s 1776cc Ti Valve wanted Post by: Bruce on May 23, 2020, 10:56:17 am A lathe with a collet, a dial indicator, and a small brass hammer. Reface when finished.
Title: Re: Mark Pascoe’s 1776cc Ti Valve wanted Post by: Fastbrit on May 23, 2020, 12:24:09 pm Titanium valves can be straightened, as Bruce suggests.
Title: Re: Mark Pascoe’s 1776cc Ti Valve wanted Post by: Paul Bate on May 23, 2020, 21:02:56 pm Hi Paul, Sure you have used google, but after a quick search are these any good? https://vwparts.aircooled.net/Titanium-Racing-Valve-Type-1-Based-Engines-Each-p/4059t1.htm Lee Thanks lee, I’ll take a look and see if they do a single grove version 👍🏻 Title: Re: Mark Pascoe’s 1776cc Ti Valve wanted Post by: Paul Bate on May 23, 2020, 21:04:56 pm A lathe with a collet, a dial indicator, and a small brass hammer. Reface when finished. Thanks Bruce, Marks not had a lot of luck with this engine. I’ve now been entrusted to put it back together and don’t really want to take any risks. Thank you for the input 😀👍🏻 Title: Re: Mark Pascoe’s 1776cc Ti Valve wanted Post by: Paul Bate on May 23, 2020, 21:05:42 pm Titanium valves can be straightened, as Bruce suggests. Thanks Keith, I hope you’re keeping well 👍🏻 |