The Cal-look Lounge

The Cal-look classifieds => For sale! => Topic started by: andy198712 on January 06, 2021, 10:58:57 am



Title: EFI, Turbo, ECU, Engine items for sale
Post by: andy198712 on January 06, 2021, 10:58:57 am
Hi,

Going a different route with the car now so i have for sale the following items.

Items are located in Cornwall but can post at cost.

Willing to group items together for a bundle price also, just ask.

Megasquirt 3 ECU setup for single coil pack and batch injection with VR sensor (but could literally run a space shuttle, endless options) = 500

Full loom for the above = SOLD

PLX wideband with touch screen gauge including sensor = sold

Holset HX40 turbo = SOLD

CB hideaway turbo header = SOLD

VW SPEED SHOP SP1 intake manifolds &injectors and stainless fuel rails and Billet throttle body = SOLD

Stainless intake pipes and silicone joiners and high quality clamps for the above = SOLD

Fuel system, Pre filter, sytec pump, pressure filter, CB T piece for tank, FPR and Teflon PTFE AN fittings and lines (best there is)for the engine side = SOLD
(may want to double that with the intake system)

LDPerformace digital dash with oil pressure sensor and oil temp sensor = 150

Porsche 911 fan OEM, 70amp alternator model, OEM fan ring machined down, including mount, strap and shroud = sold

TurboSmart waste gate 7psi spring = SOLD

Large charge cooler with AN fittings for water = 150

WBX 2.1 engine short block(minus heads, partly split down), was going to OXY conversion it but now just want the space back! = 250

2110cc engine T1, 90.5x82, CB 044 35x40 oval ported heads, scat 1.4 rockers, hoover mods, smith brothers lightweight push rods & jaycee pushrod tubes, 86b cam, stateside tuning single springs, scat valve covers, lightweight lifters, CB crank and rods, 30mm pump and deep sump with turbo return, all weight matched, blueprinted and dynamically balanced, full flowed ect, Hidden crank trigger setup, stage 1 clutch and super disc = 2750

can include thermostatic filter head, twin mocal oil coolers and AN lines for extra or separately = SOLD


Probably some bits i've forgotten, the turbo has only been ran for a few short test drives along with the MS3 and injection system, waste gate only opened a couple times so nearly new.

Any questions just ask,

some bits would be best sold together like the fuel system and intake system, or ECU and loom ect ect but will split if required


Title: Re: EFI, Turbo, ECU, Engine items for sale
Post by: Rocket Ron on January 06, 2021, 11:02:04 am
Id be interested in the loom. Could pm me with a price to post to
BH18 9DZ

Thanks


Title: Re: EFI, Turbo, ECU, Engine items for sale
Post by: andy198712 on January 06, 2021, 12:00:04 pm
Id be interested in the loom. Could pm me with a price to post to
BH18 9DZ

Thanks

PM sent


Title: Re: EFI, Turbo, ECU, Engine items for sale
Post by: Ghia 62 on January 06, 2021, 21:07:48 pm
I have sent you a PM.


Title: Re: EFI, Turbo, ECU, Engine items for sale
Post by: leec on January 06, 2021, 21:14:33 pm
Did the Holset fit straight onto the CB header or were mods needed?

Thanks,
Lee


Title: Re: EFI, Turbo, ECU, Engine items for sale
Post by: andy198712 on January 06, 2021, 22:04:33 pm
Did the Holset fit straight onto the CB header or were mods needed?

Thanks,
Lee

it touched the header so i use a another flange as a spacer and it clears  ;D


Title: Re: EFI, Turbo, ECU, Engine items for sale
Post by: andy198712 on January 06, 2021, 22:23:15 pm
I have sent you a PM.

replied  :)


Title: Re: EFI, Turbo, ECU, Engine items for sale
Post by: andy198712 on January 13, 2021, 14:42:44 pm
[attachment=1][attachment=2]


Title: Re: EFI, Turbo, ECU, Engine items for sale
Post by: andy198712 on January 13, 2021, 14:46:22 pm
[attachment=1]


Title: Re: EFI, Turbo, ECU, Engine items for sale
Post by: johandryselius on January 14, 2021, 17:33:47 pm
What is the size of the Wastegate?
Johan


Title: Re: EFI, Turbo, ECU, Engine items for sale
Post by: andy198712 on January 15, 2021, 15:25:45 pm
What is the size of the Wastegate?
Johan

Its the Ultra-Gate 38
 ;D


Title: Re: EFI, Turbo, ECU, Engine items for sale
Post by: johandryselius on January 16, 2021, 08:17:13 am
Thanks!


Title: Re: EFI, Turbo, ECU, Engine items for sale
Post by: andy198712 on January 29, 2021, 21:24:57 pm
updated with what's sold.

Also have a new Gene Berg mid mount if anyone is interested?