The Cal-look Lounge

Cal-look/High Performance => In Da Werks => Topic started by: DeathBySnuSnu on July 01, 2021, 03:11:50 am



Title: Next
Post by: DeathBySnuSnu on July 01, 2021, 03:11:50 am
Well.....the vw powered murdercycle has been fun.

Now for the next vw project.
A little car this time.
A Vokaro.

[attachment=1]


Title: Re: Next
Post by: DeathBySnuSnu on July 01, 2021, 03:13:47 am
[attachment=1]


Title: Re: Next
Post by: DeathBySnuSnu on July 01, 2021, 03:14:39 am
[attachment=1]


Title: Re: Next
Post by: DeathBySnuSnu on July 01, 2021, 03:15:30 am
[attachment=1]


Title: Re: Next
Post by: DeathBySnuSnu on July 01, 2021, 03:16:34 am
[attachment=1]


Title: Re: Next
Post by: DeathBySnuSnu on July 01, 2021, 03:17:28 am
[attachment=1]


Title: Re: Next
Post by: Neil Davies on July 01, 2021, 06:45:40 am
You can't just put pictures up like that with no explanation! It might not be cal look, but it certainly is interesting!


Title: Re: Next
Post by: DeathBySnuSnu on July 01, 2021, 18:25:00 pm
So.....whatcha wanna know?

It is a VW Vokaro.
I have put a lot of tubing on it....scared of getting run over....it is so small/short.

It has a little 2.5L V6. Double over, 4 per.
A screamer....not high HP.

Box is a 901 5 speed.

Rear suspension is IRS

Front suspension is ball joint beam.


Title: Re: Next
Post by: DeathBySnuSnu on July 04, 2021, 13:51:58 pm
Working on the front end now.

As I have drop spindles, adjusters, a pie cut, and a body drop (moved Napoleon hat)....…even with 23 inch diameter tires it was a lot of cutting to make the car fit.

[attachment=1]


Title: Re: Next
Post by: DeathBySnuSnu on July 04, 2021, 13:53:44 pm
...


Title: Re: Next
Post by: DeathBySnuSnu on July 04, 2021, 13:58:04 pm
Trying to make a wide body look.
Of course they will be glassed in and smoothed out.....not screwed to the body.

[attachment=1]


Title: Re: Next
Post by: DeathBySnuSnu on July 04, 2021, 13:59:11 pm
[attachment=1]


Title: Re: Next
Post by: DeathBySnuSnu on July 04, 2021, 14:05:37 pm
Trying to make a splitter idea work out.

[attachment=1]


Title: Re: Next
Post by: DeathBySnuSnu on July 04, 2021, 14:07:39 pm
[attachment=1]


Title: Re: Next
Post by: DaveN on July 04, 2021, 19:04:43 pm
Not very cal look is it?


Title: Re: Next
Post by: DeathBySnuSnu on July 05, 2021, 02:09:18 am
Not very cal look is it?



Well.....
If you don't count.....Riverside, Sonoma, Laguna Seca.....then no it is not much like cars in California.





Title: Re: Next
Post by: DeathBySnuSnu on May 05, 2022, 04:29:19 am
[attachment=1]


Title: Re: Next
Post by: Airspeed on May 16, 2022, 14:11:17 pm
Interesting engine and even more so the intake manifolds.
From which VW car came this 2,5 ltr V6 engine?


Title: Re: Next
Post by: Lingwendil on May 18, 2022, 15:55:30 pm
Mazda.


Title: Re: Next
Post by: DeathBySnuSnu on May 22, 2022, 19:46:56 pm
Somebody has seen a KL before.

The internet lore has Porsche as the engineer for hire that designed the original. This one in the pics is a later model engine used in Mazda's MX series cars (as opposed to the RX rotary series).

So the engine is Mazda
The trans is Porsche
The chassis is mostly mid engine dune buggy kit (unwelded)
The suspension is VW
And the body is a Vokaro made in California.

[attachment=1]


Title: Re: Next
Post by: DeathBySnuSnu on September 06, 2022, 23:57:57 pm
The old fiberglass body is coming together.

[attachment=1]

[attachment=2]

[attachment=3]

[attachment=4]



Title: Re: Next
Post by: Neil Davies on September 17, 2022, 17:34:25 pm
Is it just me that thinks that this would look great on set of ratty looking BRMs? Not that it's a bad looking car at the moment, but it screams vintage race car to me!


Title: Re: Next
Post by: DeathBySnuSnu on September 20, 2022, 00:56:56 am
I dunno.....not a big fan of brm's.
They do look good sometimes.

These are early 80's Enkie ultralight racing series 17 x 7's
I came across them and liked them.
But ....
It is supposed to have a late 50's....early 60's race car look.....think 550 Spyder up to the 904/906 cars.
So steelies would be the correct wheel for it.

It is going to be painted period race car style .... Lots of red and silver....,but then I don't like silver and it might be white and red......


Title: Re: Next
Post by: Glauco on September 20, 2022, 07:43:51 am
I would love to see this car finished. Not callook by a long shot, but very cool none the less! Will this be a racecar or will you use it on the street with some kind of interior?


Title: Re: Next
Post by: DeathBySnuSnu on September 29, 2022, 00:32:29 am
Body physically designed and manufactured in California.

Yes it will be street driven and it is barely street legal by it's year of manufacture.

But......the modern comforts never existed.

No doors
No windows
No roof
No power brakes
No power steering
No air conditioning
No heat
No dashboard
No instruments (other than a large race tach)

It does have 4 wheel disc brakes and six point harness and double loop roll cage added.

And has the normal brake/tail lights, hi/low headlights, dot windshield and wipers.
It has been registered to me since 1977 when I got it heavily used.


Title: Re: Next
Post by: DeathBySnuSnu on December 08, 2023, 02:15:44 am
Old VW going together

[attachment=1]

[attachment=2]

[attachment=3]

[attachment=4]