The Cal-look Lounge

Cal-look/High Performance => Pure racing => Topic started by: eh on July 16, 2009, 10:20:29 am



Title: 2332 Clutch disc?
Post by: eh on July 16, 2009, 10:20:29 am
    My 66 weight is about 2100 lbs and Ive some question.

   CB  Aluminum Case
   CB Super Race crank 84mm. Chevy journals
   94mm. Cima Mahle piston with Jaycee 94mm.long cylinder
   5.7 inch Scat H-beam rod
   Engle FK 10 ,Autocraft 1.4:1 Roller Rocker Arm
   Straight cut cam gears
   8.5 to 9:1 compression ratio
   CB 044 Wedge port cylinder head  44*37.5 mm.
   48 IDAs Skat Trak Manifold
   1 Merged Header
   12.5 lbs Lightweight Forged Chromoly Flywheel
   Kennedy 2600 lbs Pressure Plate

   Rhino case 3.88 r&p with solid mount
   3.10/2.06/1.58/1.21
   Aluminum side cover
   Sway Away Racing axle

   Which clutch disc to fit with my combo?
   Centerforce dual friction, 4 pucks or solid center clutch disc
   use for weekend drive only,sometime in the drag strip     

   Thanks for every comments. 

   Eh. :)


Title: Re: 2332 Clutch disc?
Post by: Udo on July 16, 2009, 11:51:50 am
Kennedy stage 2 and daiken disc . Stage 3 and 4 puck is a gearbox killer ..

Udo


Title: Re: 2332 Clutch disc?
Post by: Neil Davies on July 16, 2009, 13:11:33 pm
I used a 4 puck and a stage 2 in a 1640lb car and it wasn't a clutch pedal, it was an on/off switch. I wouldn't use one in a street car.


Title: Re: 2332 Clutch disc?
Post by: Jonny Grigg on July 16, 2009, 22:33:41 pm
stage 1 and black magic.


Title: Re: 2332 Clutch disc?
Post by: John Rayburn on July 16, 2009, 23:20:06 pm
Stage two and a Daiken.


Title: Re: 2332 Clutch disc?
Post by: Jim Ratto on July 17, 2009, 00:52:31 am
Stage two and a Daiken.

same here. Same p/p and same disc since 1998


Title: Re: 2332 Clutch disc?
Post by: Paul Bate on July 17, 2009, 15:35:16 pm
Kennedy stage 2 and daiken disc . Stage 3 and 4 puck is a gearbox killer ..

Udo

I agree with Udo! that would be my choice.

Paul


Title: Re: 2332 Clutch disc?
Post by: JIMP on July 17, 2009, 16:06:40 pm
I'm also with Udo, stage 2 and Daiken

Friendly

Dimitrios


Title: Re: 2332 Clutch disc?
Post by: eh on July 17, 2009, 17:25:25 pm
 Thanks for all answer. ;D

 Can I use daikin disc with stage 3 cause Ihave it already, or I could change the pressure plate to stage 2.

 How about centerforce dual friction use with stage 3 ?

 Eh.


Title: Re: 2332 Clutch disc?
Post by: Peter on July 17, 2009, 17:35:23 pm
i dont think you will need the dual friction,
and i would step down to a stage 2,
thats what i use in my 2276
noo slipping!


Title: Re: 2332 Clutch disc?
Post by: JS on July 17, 2009, 23:19:26 pm
Stage 1 and dual friction. Works fine. 2276.


Title: Re: 2332 Clutch disc?
Post by: BeetleBug on July 18, 2009, 15:42:13 pm

I would not use a black magic in a gearbox with syncros unless you plan on changing them every winter.

That said, the thin black magic is lighter and might be better.

Best rgs
BB


stage 1 and black magic.


Title: Re: 2332 Clutch disc?
Post by: eh on July 22, 2009, 07:08:01 am
 Thanks, everyone.. ;D

 Eh


Title: Re: 2332 Clutch disc?
Post by: gizago on July 22, 2009, 09:31:13 am
Has anyone used the ACE copperhead disc??