I'm back home, sunburnt and satisfied with the weekend. I was crewing for a friend with a fresh transmission and was finally able to lay some good runs with the new engine. First two runs resulted in PB at 7,8 and 7,75 with some pretty slow 60ft.


Thank you! I did. The only thing i haven't done, (which i should have) is to replace the bushings for the hockey stick..


I saw Martin and his runs. It was a very grippy weekend!

Things are slowly progressing.
The headliner is in, the dashboard and many other details are assembled.
And the body is on the pan, although it is only for space safing purposes for now. I still need to finish some details on the bottom of the body. [ Attachment: You are not allowed to view attachments ]
[ Attachment: You are not allowed to view attachments ]

More testing

looks nice with the wheel spacers in the back.
did you check if the gear box ventig is open and not blocked by some sealant?

mexx will be on his way tomorrow

This will be a very small update. The tachometer is finished and just needs to be installed in the car with the camera present.




I’ve started the prototype work for the roller pedal for my Fast Fab cruiser pedal. I’ve also acquired pedal rubbers with a matching pattern. I’m 3D-printing prototypes, and the finished product will be made from 6 mm bent sheet metal.





I helped a club member sort out his car a few weeks ago, and he had some parts lying around in boxes that might have been for sale. Bought these goodies off him. An unused EMPI sump and an older Berg mid-mount. Also completely unused.




Things are moving a bit slowly as I’m preparing the bus for Hessisch and EBI.. Here’s a picture of the car in its current form.




This weekend I’ll be at Malmö Raceway for Skania Flat 4 shootout! If you're there as well, let me know and lets get a beer! Cheers!
Take care!

Hi Ho ... need HELP

I am looking for 2 Pauter Super Pro Heads 108mm gen2. These would be my first choice ... but gen1 that would be ok too...

This is a very cool vintage speed part. I only have the one it's in good usable condition. There is a small ding on the top but hard to see but it is there other than that. It is in good condition. Perfect to start or complete a set
Measurements -
Height- 4 1/4 inches
Length - 6 7/8 inches
Width - 4 1/2

[ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ]

Original empi radio good condition no knobs just what you see the dials move as they should etc... could repair if it needs to be or use to fill the radio hole

I am asking only $250 shipped within the US overseas please add another $60 for usps air shipping
[ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ]

This is a pair of early empi Swedish gauges they seem to be in good condition but have not tested them if they work I put them in this cool oval grill as I was gonna put them in my oval has all the tabs etc... just needs to be detailed or use as is .. I will sell the gauges separately also prices are as follows-

Both gauges w/oval grill $600 shipped within the US
Oil temp gauge - $325 shipped within the US
Oil pressure gauge - $325 shipped within the US
 Overseas please ask for shipping quote

[ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ] [ Attachment: You are not allowed to view attachments ]