Need help with measurements on 4" AA cylinders

[Peter S]

What outer diameter are the 4" AA Performance cylinders at the bottom/foot? Anyone out there that have a set and can take that measurement for me?

I'm about to have my wbx-case cut for cylinders and plan on using other cylinders but would like to be able to use the AA as plan B if plan A backfire  

[spoolin70]

Morning Martin

When are you getting your case cut ?

I can get the measurement for you but won't be till Saturday (hopefully) as my parts
are coming out of hibernation for a little trip 

Thanks
Darren

[Peter S]

The case will be cut when I tell him to, so there is no absolute deadline.
If you can get the measurements this upcoming weekend that will be fine.

[T11964]

Bottom of cyls. 106.5mm
Going same route as you , wbx case ( early) .

[Peter S]

Bottom of cyls. 106.5mm
Going same route as you , wbx case ( early) .

Thanks!
I was about to have my case cut Ø107mm, but that seem a bit too much for a cylinder Ø106,5mm i diameter.
I was recommended a play of 0,2mm. Cutting the case Ø106,7mm should therefore be more appropriate.