The Cal-look Lounge
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2024, 04:57:29 am

Login with username, password and session length
Thank you for your support!
Search:     Advanced search
351205 Posts in 28655 Topics by 6853 Members
Latest Member: Hacksaw Racing
* Home This Year's European Top 20 lists All Time European Top 20 lists Search Login Register
+  The Cal-look Lounge
|-+  Cal-look/High Performance
| |-+  Pure racing
| | |-+  I have a question on a good case to buy for a 2442cc turbo??		 « previous next »
Pages: [1] Print
Author Topic: I have a question on a good case to buy for a 2442cc turbo??  (Read 4164 times)
mac770
Newbie
*
Posts: 3
« on: July 27, 2018, 01:40:09 am »
I just had a lifter take out my CB case. I see the CB cases are clearance for 86mm crank but nut 88mm. Should I step up and get the Scat killer case? or is there something out there I should get?
Logged
richie
Hero Member
*****
Posts: 5687
« Reply #1 on: July 27, 2018, 06:53:14 am »
Can you existing case not be repaired? I have had them done a few times when lifter broke the case.

Scat don't have any cases at moment, TF1 is probably best choice with its dropped cam for 88mm crank but it isn't a simple bolt together, the normal ally cases will take a 88mm crank, they just might need a little hand clearancing depending on what rods you use

cheers Richie
Logged
Cars are supposed to be driven, not just talked about!!!   


Good parts might be expensive but good advice is priceless Wink
dragvw2180
Sr. Member
****
Posts: 304
« Reply #2 on: July 27, 2018, 13:15:32 pm »
If I remember correctly Mike at Autocraft told me his new cases are done also . Mega Machine in North Carolina has and does repair or install roller cam setups into the Cb Cases so it is more than possible to repair your case.
Logged
mac770
Newbie
*
Posts: 3
« Reply #3 on: July 31, 2018, 16:19:38 pm »
Just got back from camping. Thanks for the replys. I'm going to take the case into a local shop today and see what they have to say. 
Logged
mac770
Newbie
*
Posts: 3
« Reply #4 on: August 07, 2018, 20:55:54 pm »
Found out my case can not be repaired. The lifter bore broke down to the oil passage. I'm going with the TF-1 case.
Logged
Fiatdude
Hero Member
*****
Posts: 1823
« Reply #5 on: August 08, 2018, 02:30:20 am »
You will love that case
Logged
Fiat -- GONE
Ovalholio -- GONE
Ghia -- -- It's going

Get lost for an evening or two -- http://selvedgeyard.com/

Remember, as you travel the highway of life,
For every mile of road, there is 2 miles of ditch
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!